WRENCH-SPARK 8S7227 - Caterpillar

2. Put identification on wire assemblies (2) for correct installation. Disconnect wire assemblies (2) from the motor.3. Disconnect hose assembly (4) from the motor.4. Remove bolts (3) and remove lower floor plate (1) from the machine. 5. Remove tube assembly (8) from the neutralizer group.6. Disconnect wire assembly (5) from the neutralizer group.7. Remove screws (7) and plate (6) from the neutralizer group. 8. Remove bolts (9) that hold the neutralizer group to the transmission. 9. Disconnect lever (11) from valve spool (10).10. Remove lever (11) from cam (13).11. Remove cam (13) from cable assembly (14).12. Remove nut (15) from cable assembly (14) and remove transmission neutralizer group (12). The following steps are for the installation of the transmission neutralizer group.13. Put cable assembly (14) in position in transmission neutralizer group (12) and install nut (15).14. Install cable assembly (14) on cam (13).15. Install lever (11) on cam (13).16. Install lever (11) on valve spool (10).17. Put transmission neutralizer group (12) and gasket in position on the transmission and install bolts (9).18. Install plate (6), the gasket and screws (7) on the neutralizer group.19. Connect wire harness (5) and tube assembly (8) to the neutralizer group.20. Make an adjustment to the transmission neutralizer control group. See Power Shift Transmission in the Testing And Adjusting Manual.21. Install lower floor plate (1) on the machine with bolts (3) that hold it.22. Connect wire assemblies (2) and hose assembly (4) to the motor.23. Install the floor plate under the seat, and install the seat.