WRENCH A- 8T2843 - Caterpillar

1. Remove cotter pin (2) from links (1) on each belt.2. Make a separation of the links and remove belt (3).3. Remove the bolts and washers that hold the panel on the back side of the cab. Remove the panel.
988B SHOWN4. Remove nut (4) from outside of the cab and washer and eyebolt from the inside.Install Seat Belt (Earlier)
1. Install eyebolt (2) with washer (1) into the panel and install the nut on the opposite side of the panel to eyebolt (2).2. Fasten links (3) of the seat belt to eyebolt (2) for installation of the seat belt. Install cotter pin in the links of the belt.
988B SHOWN3. Install panel (4) and bolts and washers (5) that hold it in place.