WRENCH-TORQUE 8T9293 - Caterpillar

The 6V4085 Torque Multiplier Group has a maximum input and output of 270 N m (200 lb ft) and 1625 N m (1200 lb ft) respectively, for a 6-to-1 power ratio with accuracy of 5%.
This tool has a 12.7 mm (.500") input shaft (socket) and a 19.05 mm (.750") output shaft with overload protection. The drive shaft will break when the output is 3% to 10% above the maximum output rating to prevent damage to the gears.
The tool has both clockwise and counterclockwise, 360° rotation, and it has a dial with 5° intervals for use when torque-turn specifications are used.
The 4kg (8.8 lb) torque multiplier group uses a tube-type reaction anchor.
The parts, in the chart which follows, are available for service of the 6V4085 Torque Multiplier Group. Illustration 2 has the same item numbers as the chart for identification of the components.
If desired, the 6V4085 Torque Multiplier Group can be sent to:
Sargent Industries
Sweeney Division
6300 Stapleton Dr.
Denver, Colorado 80216
Telephone: 303-320-4800
for repairs.
Illustration 1. The 6V4085 Torque Multiplier Group.
Illustration 2. Location of parts available for service of the 6V4085 Torque Multiplier Group.