WRENCH 9B1496 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 2
B 187-2718 Filter Wrench Assembly 1
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00891250
Remove fuel filters (1) with Tooling (B).
Illustration 2 g00891255
Remove bolts (3) at oil filter base (2). Remove clamps (4).
Illustration 3 g00891466
Loosen bolts (5) in order to allow tube (6) to rotate. Disconnect tube (6).
Illustration 4 g00891470
Disconnect harness assemblies (7) and remove harness assembly (8). Remove oil filters (9) with Tooling (B).
Illustration 5 g00891476
Remove bolts (10).
Illustration 6 g00891483
Install Tooling (A) and a suitable lifting device to oil filter base (2). Use a pry bar for balance as oil filter base (2) is removed. Remove bolts (11). The weight of oil filter base (2) is approximately 55 kg (120 lb).