WRENCH AS- 9U7523 - Caterpillar

Seat Belt Adjustment
Always check the condition of the seat belt and mounting hardware before operating the machine.Replace the seat belt at least once every three years, regardless of appearance. A date label, to determine the age of the belt, is sewn onto each belt.
Inspect for worn or frayed webbing.Check for worn or damaged buckle or anticreep slide on the belt. Replace the belt, buckle or slide if they are worn or damaged. Inspect the belt mounting hardware. Replace any damaged or worn hardware. Keep the mounting bolts tight. Fasten the seat belt. Pull belt out from left mounting until it is fully extended. Move anticreep slide toward left mounting until belt is snug.Cab Door
Outside Door Latch - Lift the latch to open the door. Inside Door Latch - Push the lever forward to open the door.Windows
The windows serve as a secondary exit. Squeeze the handle and push out to open the rear and right windows.Storage and Literature Compartment
Lift up on the latches to open the compartment.AM FM-MPX Radio
ON/OFF Switch/Volume Control (1) - Turn this knob to the right (clockwise) to turn the radio or cassette player on. Turn the knob further to the right to increase volume. Left/Right Balance Control (2) - Pull this knob and turn it either to the right or left to adjust balance for equal volume between left and right speakers. Nonfunctional Knob (3) Bass Control (4) - Rotate this knob to the right to increase bass tone, to the left to decrease it. Treble Control (5) - Push and rotate this knob to the right to increase treble tone, to the left to decrease it. Rotate while pushing the knob in. Auto Scan Tuning Switch (6) - During radio operation, press this switch to scan stations. Auto Scan Tuning stops at each station for 8 seconds. You may advance the Auto Scan Tuning either upwards or downward by operating the Manual Tuning Control. If the desired station is found, press the switch again. Auto Scan Tuning stops and the selected station remains. AM/FM Band Selector (7) - Each time this button is pushed, the selected radio band appears on the display panel. Manual Tuning Control (8) - To select a radio station manually, turn the knob to the right. The radio advances one digit higher. To tune downward, turn the knob to the left. Holding the knob in either position for longer than 1/2 second causes the radio to tune rapidly in the selected direction. Auto Seek Tuning Switch (9) - During radio operation, push this switch to search for a station automatically. If the Manual Tuning control is set upward, the Auto Seek Tuning advances to higher frequencies. When the top end of the tuning band is reached, it automatically reverts to the lower end of the band and searching resumes upward. To search down the band, set the Manual Tuning Control downward. When a station is found, the Auto Seek Tuning automatically stop. To stop it manually, press the switch again.