AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

139-7681 C-FRAME GP-POWER ANGLING S/N 8GP746-UP PART OF 139-7686 BULLDOZER AR-PWR ANGLE & TILT AN ATTACHMENT D5C III


IMPLEMENTS
C-FRAME GP
BULLDOZER GP
TRUNNION GP
OPERATOR STATION
SEAT GP
CONTROL GP-HYDRAULIC
CONTROL GP

TRACK-TYPE TRACTOR D5C III TRACK-TYPE TRACTOR 9DL
 D5C Series III Tractor Direct Drive Power Shift 9DL02550-02569 (MACHINE) POWERED BY 3046 Engine XEBP3121 D5C III 9DL   (1993)

IMPLEMENTS

C-FRAME GP
C-FRAME GP-POWER ANGLING
139-7681 C-FRAME GP-POWER ANGLING
 

#XEBP31210170
 

139-7681: C-FRAME GP-POWER ANGLING

139-7681 C-FRAME GP-POWER ANGLING
S/N 8GP746-UP
PART OF 139-7686 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01154541 XEBP3121
1397681 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-2569 [1] CAP-BEARING  
2. 8E-4026 [2] PIN AS  
3. 8E-4072 [4] SPACER (13.8X23.75X16-MM THK)  
4. 8E-5702 B [26] SHIM (0.8-MM THK)  
5. 8J-0729 [1] RETAINER  
6. 8J-0928 [1] PIN  
7. 140-1060 [1] C-FRAME AS  
7A. 8J-3443 [2] BEARING  
7B. 8P-9770 [1] PLATE  
7C. 4D-9376 [6] BOSS (3/8-16-THD)  
7D. 6M-4016 [6] LUG  
  8E-5702 B [28] SHIM (0.8-MM THK)  
  145-8837 [1] BRACKET AS  
  3G-2569 [1] CAP-BEARING  
  8E-5702 B [14] SHIM (0.8-MM THK)  
8. 150-0351 [2] SPACER (38.3X44.45X20.8-MM THK)  
9. 150-0353 [4] SPACER (38.3X44.45X14-MM THK)  
10. 150-3806 [2] PIN  
11. 170-6631 [4] BAR  
12. 170-6632 [2] PIN  
13. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
14. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
15. 7X-0391 [4] BOLT (7/8-9X5.5-IN)  
16. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
17. 5P-2228 [8] BOLT (1/2-13X1-IN)  
18. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
 

#XEBP31210171
 

150-7623: LINK GP-PITCH

150-7623 LINK GP-PITCH
S/N 8GP746-UP
PART OF 139-7686 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00767172 XEBP3121
1507623 LINK GP-PITCH Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 4D-4431 [2] BEARING-ALIGNING  
3. 179-8232 [1] LOCK PIN  
4. 9V-4460 [2] SPACER (13X50X18-MM THK)  
5. 216-4251 [1] PIN  
6. 150-7625 [1] BOSS AS  
7. 150-7627 [1] BOSS AS  
8. 184-6586 [1] COVER AS  
9. 150-7629 [1] BAR AS  
10. 2H-5549 [2] RING-RETAINING  
11. 5M-6214 [1] PLUG (1/8-27 PTF)  
12. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
13. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#XEBP31210172
 

138-1961: MOUNTING GP-TRUNNION

138-1961 MOUNTING GP-TRUNNION
S/N 8GP746-UP
PART OF 139-7686 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i00509529 XEBP3121
1381961 MOUNTING GP-TRUNNION Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-6552 [2] ELBOW-PIPE  
2. 3G-7875 [2] HOSE AS  
3. 3S-2093 [2] STRAP-CABLE  
4. 146-1679 [2] EYEBOLT  
5. 106-5089 [2] BEARING-ALIGNING  
6. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
7. 5P-9085 [2] CLIP  
8. 7X-0601 [2] WASHER-HARD (40.5X70X6-MM THK)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
11. 9X-2521 [2] NUT-FULL  
  M   METRIC PART
 

#XEBP31210173
 

6W-8505: ADJUSTER GP-SEAT

6W-8505 ADJUSTER GP-SEAT
S/N 9DL2550-2569
PART OF 6W-8502 SUSPENSION GP-SEAT
AN ATTACHMENT
i00091596 XEBP3121
6W8505 ADJUSTER GP-SEAT Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8V-4881 [4] ROLLER  
2. 4V-7860 [1] LEVER  
3. 6W-8506 [1] HOUSING AS (LOWER)  
4. 4V-7850 [1] PLATE-SLIDE TRACK  
5. 4V-7855 [1] LATCH AS  
6. 4V-7881 [1] ROD-LATCH  
7. 4V-8256 [2] SPRING  
8. 013-8289 [1] BOLT (1/2-13X0.75-IN)  
9. 4V-7859 [1] ROD-LATCH  
10. 4V-7857 [1] LATCH AS  
11. 5V-1497 [7] RETAINER  
12. 1B-6182 [1] SPACER (13.11X19.05X1.18-MM THK)  
13. 4V-7865 [1] CAP  
 

#XEBP31210174
 

8Y-0639: CONTROL GP-HYDRAULIC HAND

8Y-0639 CONTROL GP-HYDRAULIC HAND
S/N 9DL2550-2569
RIPPER
PART OF 8Y-5065 HYDRAULIC AR
AN ATTACHMENT
i00197102 XEBP3121
8Y0639 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-4084 [1] FILM-INSTRUCTION  
2. 8Y-0698 [1] LEVER AS (RIPPER)  
  1B-6182 [1] SPACER (13.11X19.05X1.18-MM THK)  
3. 4L-6454 [3] BOLT (3/8-16X1-IN)  
  5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 3B-4610 [1] PIN-COTTER  
5. 3D-9609 [1] ROD END  
6. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
7. 3D-8752 [1] LOCKNUT (5/16-24-THD)  
8. 9K-8757 [1] ROD END  
9. 8Y-0559 [1] ROD  
10. 5G-1825 [1] LEVER AS  
11. 4H-8380 [2] PIN-SPRING  
12. 8K-1255 [1] PIN  
13. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
14. 0L-1170 [1] HANDLE-LEVER  
 

#XEBP31210175
 

8Y-4983: CONTROL GP-HYDRAULIC HAND

8Y-4983 CONTROL GP-HYDRAULIC HAND
S/N 9DL2550-2569
PART OF 8Y-5065, 8Y-5068 HYDRAULIC AR
AN ATTACHMENT
i00197115 XEBP3121
8Y4983 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1170 [1] HANDLE-LEVER (BLADE TILT)  
2. 135-3195 [1] ROD AS  
3. 4L-6454 C [2] BOLT (3/8-16X1-IN)  
4. 6S-4789 [2] SUPPORT AS  
    (EACH INCLUDES)
  6K-3030 [1] BUSHING  
5. 8T-9043 [4] BOLT (5/16-18X0.875-IN)  
6. 8T-4224 [5] WASHER-HARD (8.8X16X2-MM THK)  
7. 6S-4792 [1] LEVER  
8. 6V-5782 [2] BOLT (5/16-18X1.125-IN)  
9. 3D-8752 [3] LOCKNUT (5/16-24-THD)  
10. 7H-3641 [2] END-ROD (5/16-24-THD)  
11. 5M-5479 [1] ROD  
12. 7X-3376 [6] NUT-FULL (5/16-24-THD)  
13. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
14. 5G-3138 [1] LEVER AS  
  5G-0400 [2] BEARING  
15. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
  8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
  2D-6235 [1] LOCKNUT (1/4-20-THD)  
16. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 9K-8757 [3] ROD END  
18. 2H-2292 [1] ROD-ADJUSTMENT  
19. 1W-1180 [1] ROD  
20. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
21. 5G-0419 [1] LEVER AS  
  5G-0400 [2] BEARING  
22. 8T-4896 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 5G-0278 [1] SHAFT  
24. 5G-0399 [1] SHAFT  
25. 3D-9609 [1] ROD END  
26. 1A-2457 [1] PIN-CLEVIS  
  3B-4610 [1] PIN-COTTER  
27. 031-4155 [2] LOCKNUT (5/16-18-THD)  
28. 8Y-5464 [1] BRACKET AS  
29. 105-0933 C [1] COVER AS  
  9F-2978 C [4] NUT-WELD (3/8-16-THD)  
30. 5G-1674 [1] COVER AS  
  8Y-3393 [1] SPRING  
  4B-4319 [2] RIVET  
31. 5G-0477 [1] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#XEBP31210176
 

8Y-4984: CONTROL GP-HYDRAULIC HAND

8Y-4984 CONTROL GP-HYDRAULIC HAND
S/N 9DL2550-2569
PART OF 8Y-5065, 8Y-5068 HYDRAULIC AR
AN ATTACHMENT
i00197116 XEBP3121
8Y4984 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-0274 [1] ROD-ADJUSTMENT  
2. 7X-3376 [4] NUT-FULL (5/16-24-THD)  
3. 7X-3374 [1] NUT-FULL (1/2-20-THD)  
4. 5G-0423 [1] LEVER AS  
  5G-0400 [2] BEARING  
5. 4J-2701 [1] ROD END  
  1J-4384 [1] PIN-CLEVIS  
  3B-4615 [1] PIN-COTTER  
6. 9B-7237 [4] BOLT (3/8-16X1.25-IN)  
7. 5G-0399 [2] SHAFT  
8. 5G-0325 [1] BRACKET AS  
9. 8T-9371 [4] BOLT (3/8-16X0.5-IN)  
10. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 3D-8752 [2] LOCKNUT (5/16-24-THD)  
12. 9K-8757 [2] ROD END  
13. 5G-0420 [1] LEVER AS  
  5G-0400 [2] BEARING  
14. 1W-1180 [1] ROD  
15. 7H-3641 [1] END-ROD (5/16-24-THD)  
16. 6V-5782 [1] BOLT (5/16-18X1.125-IN)  
17. 0L-1170 [1] HANDLE-LEVER (BLADE TILT)  
18. 8Y-0483 [1] LEVER  
19. 031-4155 [1] LOCKNUT (5/16-18-THD)  
20. 6S-3991 [1] FILM-INSTRUCTION  
 

#XEBP31210177
 

8Y-5053: CONTROL GP-HYDRAULIC HAND

8Y-5053 CONTROL GP-HYDRAULIC HAND
S/N 9DL2550-2569
AN ATTACHMENT
i00197892 XEBP3121
8Y5053 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1473 [1] HANDLE  
2. 7X-3374 [1] NUT-FULL (1/2-20-THD)  
3. 7S-5757 [1] RING-RETAINING  
4. 8Y-5155 [1] BOOT AS  
5. 4M-6425 [8] BOLT (5/16-18X1-IN)  
6. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
7. 8T-4896 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
9. 3W-1491 [1] SUPPORT  
10. 8G-1825 [2] ROD  
11. 3D-8752 [2] LOCKNUT (5/16-24-THD)  
12. 6V-1033 [2] END-BEARING ROD  
13. 8Y-6143 [1] ROD  
14. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
15. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
16. 8Y-5384 [1] BRACKET AS  
17. 031-4155 [8] LOCKNUT (5/16-18-THD)  
18. 7X-3376 [10] NUT-FULL (5/16-24-THD)  
19. 7H-3641 [8] END-ROD (5/16-24-THD)  
20. 8Y-2986 [1] LEVER AS  
21. 6V-9528 [1] FILM-INSTRUCTION (BLADE LIFT, TILT, ANGLE)  
22. 4L-6454 [2] BOLT (3/8-16X1-IN)  
23. 8Y-5156 [1] LEVER  
24. 8Y-5150 [1] LEVER  
25. 3W-1492 [1] LEVER  
26. 8Y-5151 [1] YOKE  
27. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
28. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-0798 [10] BEARING-ROLLER  
30. 8T-0741 [10] SEAL-LIP TYPE  
31. 8Y-5158 [1] SHAFT  
32. 8Y-5157 [1] SHAFT  
33. 8Y-5153 [1] SHAFT AS  
34. 3W-1482 [1] SHAFT AS  
35. 1B-8704 [1] KEY-WOODRUFF  
36. 8G-4658 [1] ROD  
37. 6S-7982 [1] SPACER (50MM THK)  
38. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
39. 2M-2292 [1] ROD  
40. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
 

#XEBP31210178
 

8Y-7111: CONTROL GP-HYDRAULIC HAND

8Y-7111 CONTROL GP-HYDRAULIC HAND
S/N 9DL2550-2569
RIPPER
PART OF 8Y-7126 HYDRAULIC AR
AN ATTACHMENT
i00197175 XEBP3121
8Y7111 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6S-4084 [1] FILM-INSTRUCTION (RIPPER LIFT, LOWER)  
2. 8Y-7112 [1] LEVER AS  
  1B-6182 [1] SPACER (13.11X19.05X1.18-MM THK)  
3. 4L-6454 [3] BOLT (3/8-16X1-IN)  
  5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 3B-4610 [1] PIN-COTTER  
5. 3D-9609 [1] ROD END  
6. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
7. 3D-8752 [2] LOCKNUT (5/16-24-THD)  
8. 9K-8757 [1] ROD END  
9. 8Y-0559 [1] ROD  
10. 8Y-7113 [1] LEVER AS  
11. 4H-1641 [1] PIN-SPRING  
12. 8K-1255 [1] PIN  
13. 0L-1170 [1] HANDLE-LEVER  
 

#XEBP31210179
 

8Y-5052: CONTROL GP-TRANSMISSION

8Y-5052 CONTROL GP-TRANSMISSION
S/N 9DL2550-2569
AN ATTACHMENT
i00197891 XEBP3121
8Y5052 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your D5C III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-5794 C [1] PLATE  
2. 4B-1281 [4] SCREW-MACHINE (1/4-20X0.625-IN)  
3. 1K-9060 C [2] SEAL-LIP TYPE  
4. 5G-5726 [1] KNOB  
5. 8Y-1340 [1] LEVER  
6. 5P-1075 C [7] WASHER-HARD (10.2X22.5X3-MM THK)  
7. 9K-8757 [4] ROD END  
  4F-2294 [8] NUT-JAM (5/16-24-THD)  
8. 5G-1671 [1] BRACKET  
9. 3N-7824 [1] ROD  
10. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
11. 5G-1092 [2] LEVER AS  
12. 2Y-1834 [1] CLIP  
13. 3N-2843 [1] ROD  
14. 4L-6454 C [16] BOLT (3/8-16X1-IN)  
15. 8T-4896 [23] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8Y-4955 [1] BRACKET AS  
17. 5S-7379 [11] BOLT (3/8-16X0.875-IN)  
18. 5P-8167 [1] BOLT (3/8-16X0.625-IN)  
19. 5G-1034 [1] COVER  
20. 8Y-5195 [1] BRACKET  
21. 5G-1086 [1] BRACKET  
22. 5G-1181 [1] LEVER  
23. 5G-0400 [2] BEARING  
24. 1D-5117 [1] NUT-JAM (1/2-13-THD)  
25. 6V-8189 [1] NUT (5/16-18-THD)  
  8S-7271 [1] SETSCREW  
26. 2M-8908 [1] KNOB  
27. 137-5945 [1] SPRING  
28. 8Y-5194 [1] LEVER AS  
29. 9L-8660 [2] SEAL-LIP TYPE  
30. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 5B-5821 [1] DOWEL  
32. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
33. 6D-6187 B [1] SHIM (0.127-MM THK)  
  6D-6189 B [3] SHIM (0.254-MM THK)  
34. 6V-8801 [1] NUT (3/8-16-THD)  
35. 2K-8467 [1] PIN-SPRING  
36. 5G-1158 [1] SHAFT  
37. 5G-1157 [1] YOKE  
38. 8T-5361 [2] WASHER-HARD (28X49X5-MM THK)  
39. 9X-2306 [1] WASHER (11X50X5-MM THK)  
40. 9S-1354 [6] NUT (5/8-18-THD)  
  8T-4122 [6] WASHER-HARD (17X32X3.5-MM THK)  
  1V-6341 [2] SEAL  
41. 8D-5295 [2] PIN  
  8D-5294 [2] RING  
42. 4K-8603 [1] PLUG-CUP  
43. 4F-7952 [2] SEAL-O-RING  
44. 5G-5741 [2] HOUSING  
45. 1B-8704 [2] KEY-WOODRUFF  
46. 5G-1253 [2] LEVER  
47. 9D-5506 [2] ROD END  
48. 9M-1311 [4] NUT-JAM (1/4-28-THD)  
49. 5G-1031 [1] HOUSING  
  9S-4684 [1] PLUG  
  3J-1907 [1] SEAL-O-RING  
50. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
51. 6J-2256 [2] PIN  
  3B-4610 [2] PIN-COTTER  
  8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
52. 9H-2400 [2] BEARING  
53. 5G-1061 [2] BEARING  
54. 8C-5604 [2] CABLE AS  
55. 5G-5743 [2] ROD END  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Caterpillar Parts SIS Catalog D5C III :

139-7686 BULLDOZER AR-PWR ANGLE & TILT
VALVE GP-RELIEF
9T-7639 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-7638 VALVE GP-RELIEF
VALVE GP-CONTROL
9T-7651 VALVE GP-CONTROL
VALVE GP-CONTROL
9T-7642 VALVE GP-CONTROL
VALVE GP-CONTROL
9T-7641 VALVE GP-CONTROL
VALVE GP-CHECK
9T-7634 VALVE GP-CHECK
VALVE GP-BREAKER RELIEF
6S-4767 VALVE GP-BREAKER RELIEF
LINK GP-PITCH
150-7623 LINK GP-PITCH
MOUNTING GP-TRUNNION
138-1961 MOUNTING GP-TRUNNION
ADJUSTER GP-SEAT
6W-8505 ADJUSTER GP-SEAT
CONTROL GP-HYDRAULIC HAND
8Y-0639 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
8Y-4983 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
8Y-4984 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
8Y-5053 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
8Y-7111 CONTROL GP-HYDRAULIC HAND

Truck sale:

Caterpillar D5CIIIXL, Construction
36,500 
Caterpillar D5CIIIXL, Construction
- Dozers
CARTER MACHINERY COMPANY, INC.
Caterpillar D5CIIIXL, Construction
28,000 
Caterpillar D5CIIIXL, Construction
- Dozers
FOLEY, INC.
Caterpillar D5CIIIXL, Construction
30,000 
Caterpillar D5CIIIXL, Construction
- Dozers
WHAYNE SUPPLY COMPANY
CATERPILLAR D5CIII 1994
 
CATERPILLAR D5CIII 1994
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR D5CIII 1994
 
CATERPILLAR D5CIII 1994
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.