AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

GOVERNOR (6I4267 N/S)--Unit Injector--Part2 of 2 Engine Serial No. 1CK9179-UP Part of 4P5727 Page 62.01A 325-A


FUEL SYSTEM
GOVERNOR GP
CONTROL GP-GOVERNOR
FILTER GP-FUEL

EXCAVATOR 325-A EXCAVATOR 5WK
 325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED BY 3116 ENGINE XEBP7140 325-A 5WK   (1991)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
4P-5502 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
6I-4267 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
6I-4267 GOVERNOR GP-UNIT INJECTOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
FUEL RATIO CONTROL
4P-5746 FUEL RATIO CONTROL
 

#XEBP71400110
 

6I-4267: GOVERNOR GP-UNIT INJECTOR

GOVERNOR (6I4267 N/S)--Unit Injector--Part2 of 2
Engine Serial No. 1CK9179-UP
Part of 4P5727 Page 62.01A
j56931e XEBP7140
6I4267 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5148 [1] CARRIER  
2. 2S-7316 [2] DOWEL  
3. 6V-7699 [4] WASHER  
4. 8C-8545 [4] BOLT  
5. 4P-8947 [1] RISER  
6. 4P-0737 [1] SHAFT  
7. 7W-5591 [1] SEAT  
8. 7C-5885 [1] WASHER  
9. 7L-3386 [1] SEAL  
10. 7C-5884 [1] COVER  
11. 6V-5100 [1] SEAL  
12. 7C-5883 B [7] SHIM (0.25mm THICK)  
13. 7C-3776 [1] PISTON ASSEM.  
14. 4P-8948 [1] SEAT ASSEM.  
15. 7W-8993 [2] WEIGHT  
16. 7C-5541 [2] TOE  
17. 7W-1440 B [8] SHIM (0.12mm THICK)  
18. 115-1192 C [1] SEAL  
19. 7C-2743 [2] RACE  
20. 7W-5561 [1] BEARING  
21. 8C-5061 [1] RING  
22. 8C-8546 [9] BOLT  
23. 7C-5150 [1] PIN  
24. 7C-5480 [1] SPRING  
25. 7C-8640 [1] SPRING  
26. 8C-6775 [1] SETSCREW  
27. 7C-6592 [1] ARBOR ASSEM.  
28. 7E-3216 [1] BLOCK ASSEM.  
29. 7W-5594 [1] SHAFT ASSEM.  
30. 3P-3547 [1] RING  
31. 7E-3217 [1] LEVER ASSEM.  
32. 114-1803 C [1] LEVER ASSEM.  
  B   USE AS REQUIRED
  C   INDICATES CHANGE
 

#XEBP71400111
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E8794 GOVERNOR AND TRANSFER PUMP DRIVE GROUP--Part 1 of 2
Engine Serial No. 1CK5270-UP
Part of 4P5502 Page 62.02, 6I4267--Page 62.03A
j46676e XEBP7140
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-8598 [2] RING  
2. [1] SPRING  
3. 4P-3538 [1] SHAFT  
4. 6V-5213 [2] BOLT  
5. 7E-3944 [1] SLEEVE  
6. 7E-3943 [1] LEVER  
7. 9Y-9846 [1] SCREW  
8. 4P-5612 [1] HOUSING ASSEM.  
9. 7S-6798 [1] SEAL  
10. 7S-5005 [2] DOWEL  
11. 9Y-3107 [1] BOLT  
12. 4P-9490 [1] SHAFT ASSEM.  
  4P-9489 [1] SHAFT  
  4P-9491 [1] SHIM  
  4P-9492 [1] BRACKET  
13. 4P-9494 [1] SPRING  
14. 7W-9402 [1] LEVER  
15. 4P-9493 [1] LEVER  
16. 9X-8902 [4] BOLT  
17. 7W-5615 [1] SLEEVE ASSEM.  
 

#XEBP71400112
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E8794 GOVERNOR AND TRANSFER PUMP DRIVE GROUP--Part 2 of 2
Engine Serial No. 1CK5270-UP
Part of 4P5502 Page 62.02, 6I4267--Page 62.03A
j46775e XEBP7140
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-9986 [2] SEAL  
2. 4P-3953 [1] PISTON ASSEM.  
3. 7E-0156 [1] FITTING  
4. 4P-4224 [1] COVER  
5. 7C-5294 [1] SPRING  
6. 8C-6364 [3] BOLT  
7. 7E-9898 [1] CONNECTOR  
8. 3J-1907 [2] SEAL  
9. 7W-7383 [2] VALVE ASSEM.  
 

#XEBP71400113
 

4P-5746: FUEL RATIO CONTROL

4P5746 FUEL RATIO CONTROL ASSEMBLY
Engine Serial No. 1CK5270-UP
Part of 4P5727--Page 62.01
j47624e XEBP7140
4P5746 FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5599 [1] WASHER  
2. 8T-5447 [1] RING  
3. [1] HOUSING  
4. [1] HOUSING  
5. [1] RETAINER ASSEM.  
  [1] STEM  
6. [1] SPRING  
7. 6I-1564 [1] DIAPHRAGM  
8. 7W-1691 [1] WASHER  
9. [1] SPRING  
10. [1] GUIDE  
11. 7W-5324 [1] BEARING  
 

#XEBP71400114
 

7W-4812: FASTENER GP-GOVERNOR

FASTENER (7W4812 N/S)--Governor
Part of 7E7660 Page 61
j50546e XEBP7140
7W4812 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 [1] SLEEVE  
2. 9M-1974 [3] WASHER  
3. 6V-5218 [3] BOLT  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL  
6. 7C-3839 [1] CLIP  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL  
 

#XEBP71400115
 

7W-8434: LINES GP-GOVERNOR OIL

GOVERNOR OIL LINES (7W8434 N/S)
Part of 7E7660 Page 61
j41532e XEBP7140
7W8434 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8628 [1] ELBOW  
2. 7W-0367 [1] TUBE ASSEM.  
3. 6V-8647 [1] CONNECTOR  
4. 3J-7354 C [2] SEAL  
5. 4J-5477 [2] SEAL  
  C   INDICATES CHANGE
 

#XEBP71400116
 

7Y-5473: CONTROL GP-GOVERNOR

7Y5473 CONTROL GP-GOVERNOR (V)
S/N 8JG1-Up, 7CJ1-Up, 5WK1-Up, 6KK1-Up
h30261e XEBP7140
7Y5473 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-5381 [1] PULLEY  
2. 7X-2534 [2] BOLT  
3. 9X-8256 [4] WASHER  
4. 8T-4171 [2] BOLT  
5. 096-1349 [2] CLIP  
6. 7Y-5486 [1] BRACKER AS  
7. 096-5866 [2] BOLT  
8. 8T-4224 [11] WASHER  
9. 8T-6912 [2] BOLT  
10. 7Y-5482 [1] SUPPORT AS  
11. 9M-8406 [2] CLIP  
12. 8T-4200 [2] BOLT  
13. 099-3649 [2] BOLT  
14. 7Y-8170 [1] GROMMET  
15. 7Y-5478 [1] COVER AS  
16. 8T-4189 [3] BOLT  
17. 8T-4191 [4] BOLT  
18. 8T-4121 [4] WASHER  
19. 7Y-5461 [1] MOTOR AS  
20. 7Y-5561 [1] PACKING  
21. 7Y-5560 [1] COVER  
22. 9G-3672 [1] HOUSING  
23. 7N-7779 [3] SOCKET  
24. 7N-7780 [2] PIN  
25. 9G-9154 [1] CLIP  
26. 4I-5372 [1] BOSS  
 

#XEBP71400117
 

102-7973: CONTROL GP-GOVERNOR

1027973 CONTROL GP-GOVERNOR (V)
S/N 8NL1-Up, 9KL1-Up
h37367e XEBP7140
1027973 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-3649 [2] BOLT (40mm LONG)  
2. 8T-4224 [13] WASHER  
3. 6D-4246 [2] CLIP  
4. 8T-4189 [5] BOLT (20mm LONG)  
5. 7Y-8170 [1] GROMMET  
6. 7Y-5478 [1] COVER AS  
7. 9G-9154 [1] CLIP  
8. 106-0070 [1] SPRING  
9. 102-7971 [1] BRACKET AS  
10. 096-5866 [2] BOLT (75mm LONG)  
11. 8T-6912 [2] BOLT (50mm LONG)  
12. 102-7966 [1] SUPPORT AS  
13. 102-8046 [1] LEVER AS  
14. 8T-4138 [2] BOLT (20mm LONG)  
15. 9X-8256 [2] WASHER  
16. 5C-7261 [1] NUT  
17. 8T-4191 [4] BOLT (16mm LONG)  
18. 8T-4121 [4] WASHER  
19. 106-0100 [1] MOTOR AS  
20. 9G-3672 [1] HOUSING  
21. 7N-7779 [3] SOCKET  
22. 7N-7780 [2] PIN  
23. 7Y-5561 [1] PACKING  
24. 7Y-5560 [1] COVER  
 

#XEBP71400118
 

4P-7206: PUMP GP-FUEL PRIME & PRIM FLTR

FUEL PRIMING PUMP AND PRIMARY FILTER (4P7206 N/S)--Part 1 of 2
Engine Serial No. 1CK4386-1CK8417
j56918e XEBP7140
4P7206 PUMP GP-FUEL PRIME & PRIM FLTR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4189 [1] BOLT (20mm LONG)  
2. 8T-4224 [1] WASHER  
3. 3K-0360 [1] SEAL  
4. 5P-6944 [1] ADAPTER  
5. 1P-0436 [1] GASKET  
6. 9M-1974 [1] WASHER  
7. 1B-7182 [1] BOLT (32mm LONG)  
8. 105-2508 [1] PUMP ASSEM.  
9. 7B-2742 [1] BOLT (32mm LONG)  
10. 5P-0537 [1] WASHER  
11. 5P-1404 [1] ADAPTER  
12. 2M-9780 [1] SEAL  
13. 5P-4924 [2] ELBOW  
14. 3J-1907 [2] SEAL  
15. 5P-4961 [2] CLAMP  
 

#XEBP71400119
 

4P-7206: PUMP GP-FUEL PRIME & PRIM FLTR

FUEL PRIMRNG PUMP AND PRIMARY FILTER (4P7206 N/S)--Part 2 of 2
Engine Serial No. 1CK4386-1CK8417
j56919e XEBP7140
4P7206 PUMP GP-FUEL PRIME & PRIM FLTR Parts scheme
  For full view, you need register

Parts for your 325-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-8205 [1] BASE ASSEM.  
  7E-5346 [1] VALVE ASSEM.  
  9S-8003 [2] PLUG (1/2)  
  1J-9671 [2] SEAL  
2. 8T-4121 [6] WASHER  
3. 8T-4196 [2] BOLT (35mm LONG)  
4. 8T-4133 [2] NUT  
5. 4P-7300 [1] BRACKET  
6. 8T-4137 [2] BOLT (20mm LONG)  
7. 6V-5839 [4] WASHER  
8. 6V-6317 [2] BOLT (20mm LONG)  
9. 4P-9613 [1] PLATE  
10. 6V-4248 [1] BOLT (25mm LONG)  
11. 2Y-5829 [1] NUT  
12. 9M-8406 [1] CLIP  
13. 5P-1442 E HOSE 103CM  
14. 8H-2807 [1] NUT  
15. 2J-0157 [1] SEAL  
16. 1L-3769 [1] RING  
17. 8H-2778 [1] GASKET  
18. 9M-2341 [1] ELEMENT ASSEM.  
19. 8H-2810 [1] CASE ASSEM.  
20. 7H-9678 [1] RETAINER  
21. 2H-3429 [1] RING  
22. 7S-9323 [1] SPRING  
  E   ORDER BY THE CM
 

Information:

Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Caterpillar Parts SIS Catalog 325-A :

GOVERNOR GP-UNIT INJECTOR
6I-4267 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5502 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5502 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5727 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5727 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
7E-3640 GOVERNOR GP-UNIT INJECTOR
7E-7660 GOVERNOR GP-UNIT INJECTOR
7E-7660 GOVERNOR GP-UNIT INJECTOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
FUEL RATIO CONTROL
4P-5746 FUEL RATIO CONTROL
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
CONTROL GP-GOVERNOR
7Y-5473 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
102-7973 CONTROL GP-GOVERNOR
PUMP GP-FUEL PRIME & PRIM FLTR
4P-7206 PUMP GP-FUEL PRIME & PRIM FLTR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.