AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7Y1605 SPROCKET GP-NON SEGMENTED (B)-2 REQUIRED 320 L EXCAVATOR


POWER TRAIN
SPROCKET GP
DRIVE GP-FINAL
HYDRAULIC SYSTEM
DRIVE GP
OPERATOR STATION
PLATFORM GP

EXCAVATOR 320 L EXCAVATOR 1KL
 320, 320L TRACK-TYPE EXCAVATORS 1KL00001-UP (MACHINE) POWERED BY 3066 ENGINE XEBP7170 320 L 1KL   (2019)

POWER TRAIN

SPROCKET GP
SPROCKET GP-NON-SEGMENTED
7Y-1605 SPROCKET GP-NON-SEGMENTED
 

#XEBP71700220
 

7Y-1605: SPROCKET GP-NON-SEGMENTED

7Y1605 SPROCKET GP-NON SEGMENTED (B)-2 REQUIRED
h31217e XEBP7170
7Y1605 SPROCKET GP-NON-SEGMENTED Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9805 [1] SPROCKET  
2. 7X-2562 [16] BOLT  
 

#XEBP71700221
 

7Y-1571: FINAL DRIVE GP

7Y1571 DRIVE GP-FINAL (D)-PART 1 OF 2
Part of 7Y1555 Drive listed on Page 111
h31422e XEBP7170
7Y1571 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2568 [16] BOLT  
2. 8T-4123 [16] WASHER  
3. 1U-8846 B GASKET MAKER (10ml)  
4. 7Y-1631 [1] GEAR (79 TEETH)  
5. 6D-0692 [1] SEAL  
6. 7Y-1436 [1] GEAR (55 TEETH)  
7. 093-7828 [4] PIN  
8. 7Y-1437 [1] HOUSING  
9. 096-6412 [2] BEARING  
10. 093-1425 [1] SEAL GP  
11. 7Y-1438 [1] HOUSING  
12. 096-1773 B [1] SHIM (0.15mm THICK)  
  096-1774 B [1] SHIM (0.30mm THICK)  
  096-1775 B [1] SHIM (0.40mm THICK)  
  096-1776 B [1] SHIM (0.50mm THICK)  
  096-1777 B [1] SHIM (0.60mm THICK)  
  096-1778 B [1] SHIM (0.70mm THICK)  
  096-1779 B [1] SHIM (0.80mm THICK)  
  096-1780 B [1] SHIM (1.00mm THICK)  
  096-1781 B [1] SHIM (1.60mm THICK)  
13. 6V-5686 [16] BOLT  
14. 7Y-1428 [3] GEAR (32 TEETH)  
15. 095-1270 [2] SETSCREW  
16. 3E-2338 [2] PLUG  
17. 7M-8485 [2] SEAL  
18. 7Y-1426 [1] COVER  
19. 094-0580 [1] PLATE  
  B   USE AS REQUIRED
 

#XEBP71700222
 

7Y-1571: FINAL DRIVE GP

7Y1571 DRIVE GP-FINAL (D)-PART 2 OF 2
Part of 7Y1555 Drive listed on Page 111
h31200e XEBP7170
7Y1571 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1433 [1] CARRIER  
2. 7Y-1434 [1] SPACER  
3. 7Y-0223 [3] SHAFT  
4. 094-1542 [6] BEARING  
5. 7Y-1431 [3] GEAR (30 TEETH)  
6. 094-1528 [6] WASHER  
7. 095-0891 [6] PIN  
8. 094-0616 [3] BEARING  
9. 7Y-0225 [3] SHAFT  
10. 094-0611 [6] WASHER  
11. 7Y-1427 [1] GEAR (11 TEETH)  
12. 7Y-1430 [1] GEAR (17 TEETH)  
13. 7Y-1558 [1] SPACER  
14. 7Y-1432 [1] CARRIER  
 

#XEBP71700223
 

7Y-1554: DRIVE GP-SWING

7Y1554 DRIVE GP-SWING (A) (W/MOTOR)
7Y1566--Page 115,087-4714--Page 234
h31418e XEBP7170
7Y1554 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1855 [1] PIPE  
2. 7Y-1566 Y [1] DRIVE GP  
3. 094-1540 [1] GAUGE  
4. 087-4714 Y [1] MOTOR GP  
5. 1U-8846 B GASKET MAKER (10ml)  
6. 7Y-2150 [1] PLUG  
7. 3D-2824 [1] SEAL  
8. 4I-7527 [1] BREATHER AS  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP71700224
 

7Y-1566: DRIVE GP-SWING

7Y1566 DRIVE GP-SWING (A)
Part of 7Y1554 Drive listed on Page 114
h31198e XEBP7170
7Y1566 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0584 [12] WASHER  
2. 7Y-1764 [3] SHAFT  
3. 7Y-1644 [3] GEAR (25 TEETH)  
4. 7Y-1643 [1] GEAR (23 TEETH)  
5. 093-1729 [2] RING  
6. 7Y-1751 [1] CARRIER  
7. 6V-3532 [1] BOLT  
8. 7Y-1765 [1] WASHER  
9. 7Y-1645 [1] GEAR (23 TEETH)  
10. 7Y-1752 [1] CARRIER  
11. 7Y-1777 [1] RETAINER  
12. 7Y-1755 [1] GEAR (73 TEETH)  
13. 7Y-1759 B [5] SHIM (0.1mm THICK)  
  7Y-1760 B [2] SHIM (0.3mm THICK)  
  7Y-1761 B [1] SHIM (0.5mm THICK)  
  7Y-1762 B [1] SHIM (1.0mm THICK)  
14. 096-4339 [1] BEARING  
15. 7Y-1758 [1] SPACER  
16. 1U-8846 B GASKET MAKER (4ml)  
17. 7Y-1772 [1] CAGE  
18. 8T-4183 [6] BOLT  
19. 8T-4223 [6] WASHER  
20. 7Y-1766 [2] SEAL  
21. 7Y-1775 [1] SHAFT  
22. 095-1022 [1] BEARING  
23. 7Y-1753 [1] HOUSING  
24. 7Y-0337 [1] NIPPLE  
25. 1B-5174 [1] PLUG  
26. 4B-5984 [1] ELBOW  
27. 7Y-1646 [3] SHAFT  
28. 096-4837 [7] PIN  
29. 7Y-1756 [3] BEARING  
30. 7Y-1754 [3] GEAR (25 TEETH)  
31. 094-1516 [3] BEARING  
  B   USE AS REQUIRED
 

#XEBP71700225
 

5I-3897: PLATFORM GP-OPERATOR

5I3897 PLATFORM GP-OPERATOR-PART 1 OF 2
S/N 8LK1--00973, 1KL1--00349
h32390e XEBP7170
5I3897 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2044 [3] SCREW  
2. 5I-3331 [1] COVER AS  
3. 7Y-3265 [1] KNOB  
4. 7Y-3167 [1] PLATE AS  
5. 8T-4137 [2] BOLT (20mm LONG)  
6. 8T-4121 [2] WASHER  
7. 7Y-3176 [1] PIN AS  
8. 6I-5420 [2] SUPPORT AS  
9. 9X-8257 [4] WASHER  
10. 099-7313 [4] CASE  
11. 5I-3251 [2] SLEEVE  
12. 8T-4175 [2] BOLT (90mm LONG)  
13. 099-7172 [4] MOUNT  
14. 5I-3202 [2] BUSHING  
15. 7Y-3127 B [4] SHIM (0.6 mm THICK)  
  7Y-3118 B [2] SHIM (1.2 mm THICK)  
  B   USE AS REQUIRED
 

#XEBP71700226
 

5I-3897: PLATFORM GP-OPERATOR

5I3897 PLATFORM GP-OPERATOR-PART 2 OF 2
S/N 8LK1--00973, 1KL1--00349
h37210e XEBP7170
5I3897 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-3902 [1] FLOORMAT  
2. 8T-4137 [2] BOLT (20mm LONG)  
3. 8T-4121 [10] WASHER  
4. 4I-6958 [1] PLATE AS  
5. 7Y-3196 [2] GROMMET  
6. 6I-5087 [1] GROMMET  
7. 5I-3898 [1] PLATFORM AS  
8. 6I-5086 [1] GROMMET  
9. 7Y-3281 [2] GROMMET  
10. 5I-3251 [4] SLEEVE  
11. 9X-8257 [8] WASHER  
12. 8T-4175 [4] BOLT (90mm LONG)  
13. 7Y-3127 B [8] SHIM (0.6 mm THICK)  
  7Y-3118 B [4] SHIM (1.2 mm THICK)  
14. 4I-3266 [2] STRIP  
15. 099-7172 [8] MOUNT  
16. 5I-3202 [4] BUSHING  
17. 7Y-0623 [4] NUT  
18. 099-7313 [8] CASE  
19. 8T-4191 [4] BOLT (16mm LONG)  
  B   USE AS REQUIRED
 

#XEBP71700227
 

5I-3897: PLATFORM GP-OPERATOR

5I3897 PLATFORM GP-OPERATOR-PART 1 OF 2
S/N 8LK00974--01275, 1KL00350--00441
h37149e XEBP7170
5I3897 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2044 [3] SCREW  
2. 5I-3331 [1] COVER AS  
3. 7Y-3265 [1] KNOB  
4. 7Y-3167 [1] PLATE AS  
5. 8T-4137 [2] BOLT (20mm LONG)  
6. 8T-4121 [2] WASHER  
7. 7Y-3176 [1] PIN AS  
8. 6I-5420 [2] SUPPORT AS  
9. 9X-8257 [4] WASHER  
10. 099-7313 [4] CASE  
11. 5I-3251 [2] SLEEVE  
12. 8T-4175 [2] BOLT (90mm LONG)  
13. 099-7172 [4] MOUNT  
14. 5I-3202 [2] BUSHING  
15. 7Y-3127 B [4] SHIM (0.6 mm THICK)  
  7Y-3118 B [2] SHIM (1.2 mm THICK)  
  B   USE AS REQUIRED
 

#XEBP71700228
 

5I-3897: PLATFORM GP-OPERATOR

5I3897 PLATFORM GP-OPERATOR-PART 2 OF 2
S/N 8LK00974--01275, 1KL00350--00441
h37148e XEBP7170
5I3897 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-3902 [1] FLOORMAT  
2. 8T-4137 [2] BOLT (20mm LONG)  
3. 8T-4121 [10] WASHER  
4. 4I-6958 [1] PLATE AS  
5. 7Y-3196 [2] GROMMET  
6. 6I-5087 [1] GROMMET  
7. 7I-6894 [1] PLATFORM AS  
8. 6I-5086 [1] GROMMET  
9. 7Y-3281 [2] GROMMET  
10. 5I-3251 [4] SLEEVE  
11. 9X-8257 [8] WASHER  
12. 8T-4175 [4] BOLT (90mm LONG)  
13. 7Y-3127 B [8] SHIM (0.6 mm THICK)  
  7Y-3118 B [4] SHIM (1.2 mm THICK)  
14. 4I-3266 [2] STRIP  
15. 099-7172 [8] MOUNT  
16. 5I-3202 [4] BUSHING  
17. 7Y-0623 [4] NUT  
18. 099-7313 [8] CASE  
19. 8T-4191 [4] BOLT (16mm LONG)  
20. 7I-0337 [2] GROMMET  
  B   USE AS REQUIRED
 

#XEBP71700229
 

110-5624: PLATFORM GP-OPERATOR

1105624 PLATFORM GP-OPERATOR
S/N 8LK01276-Up, 1KL00442-Up
h32485e XEBP7170
1105624 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 320 L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-0963 [1] PLATFORM AS  
2. 9X-8257 [12] WASHER  
3. 8T-4175 [6] BOLT (90mm LONG)  
4. 7Y-3127 B [12] SHIM (0.6mm THICK)  
  7Y-3118 B [6] SHIM (1.2mm THICK)  
5. 6I-5087 [1] GROMMET  
6. 099-7172 [12] MOUNT  
7. 5I-3202 [6] BUSHING  
8. 7Y-0623 [6] NUT  
9. 099-7313 [12] CASE  
10. 5I-3251 [6] SLEEVE  
11. 7I-0337 [2] GROMMET  
12. 4I-3266 [2] STRIP  
13. 7Y-3196 [2] GROMMET  
14. 6I-5086 [1] GROMMET  
15. 8T-4137 [2] BOLT (20mm LONG)  
16. 8T-4121 [10] WASHER  
17. 7Y-3281 [2] GROMMET  
18. 110-5644 [1] FLOORMAT  
19. 8T-4191 [4] BOLT (16mm LONG)  
20. 111-1149 [1] COVER AS  
  B   USE AS REQUIRED
 

Information:

Information Release Memo
CLASSIC UNDERCARRIAGE FOR 320B AND 320 HYDRAULIC EXCAVATORS
CLASSIC UNDERCARRIAGE FOR 320B AND 320 HYDRAULIC EXCAVATORS
Disassembly and Assembly
Final Drive Sprockets
320 & 320 L EXCAVATORS VEHICLE SYSTEMS
Service Magazine
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 320 L :

FINAL DRIVE GP
7Y-1555 FINAL DRIVE GP
FASTENER GP
7Y-1550 FASTENER GP
LAMP GP-FLOOD
5I-8250 LAMP GP-FLOOD
LAMP GP-FLOOD
9X-6775 LAMP GP-FLOOD
LAMP GP-FLOOD
5I-8251 LAMP GP-FLOOD
LIGHTING GP
7Y-5582 LIGHTING GP
LIGHTING GP
4I-5395 LIGHTING GP
LIGHTING GP
7Y-5450 LIGHTING GP
FINAL DRIVE GP
7Y-1571 FINAL DRIVE GP
FINAL DRIVE GP
7Y-1571 FINAL DRIVE GP
DRIVE GP-SWING
7Y-1554 DRIVE GP-SWING
DRIVE GP-SWING
7Y-1566 DRIVE GP-SWING
PLATFORM GP-OPERATOR
5I-3897 PLATFORM GP-OPERATOR
PLATFORM GP-OPERATOR
5I-3897 PLATFORM GP-OPERATOR
PLATFORM GP-OPERATOR
5I-3897 PLATFORM GP-OPERATOR
PLATFORM GP-OPERATOR
5I-3897 PLATFORM GP-OPERATOR

Truck sale:

 
 
Caterpillar 320L, Crawler Excavators, Construction


 
35,000 
Caterpillar 320L, Crawler Excavators, Construction
- Crawler Excavators
ALTORFER INC.
 
225,000 
Caterpillar 320LONG, Crawler Excavators, Construction


Caterpillar 320L, Crawler Excavators, Construction
16,500 
Caterpillar 320L, Crawler Excavators, Construction
- Crawler excavators
HOLT CAT
 
 
Caterpillar 320 L, Raupenbagger, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.