AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5I7287 LINKAGE AR-FRONT (LONG REACH) (PHASE II) S/N 9KK1-Up An Attachment 320-A EXCAVATOR


IMPLEMENTS
LINKAGE GP
BOOM GP
STICK GP

EXCAVATOR 320-A EXCAVATOR 2DL
 320, 320L TRACK-TYPE EXCAVATORS 2DL00001-00213 (MACHINE) POWERED BY 3066 ENGINE XEBP7183 320-A 2DL   (1992)

IMPLEMENTS

LINKAGE GP
087-3699 LINKAGE AR-BUCKET
7Y-0084 LINKAGE AR-BUCKET
087-3699 LINKAGE AR-BUCKET
5I-7287 LINKAGE AR-FRONT
LINKAGE GP-BUCKET
087-5912 LINKAGE GP-BUCKET
LINKAGE GP-BUCKET
7Y-2207 LINKAGE GP-BUCKET
LINKAGE GP-BUCKET
7Y-6398 LINKAGE GP-BUCKET
 

#XEBP71830590
 

5I-7287: LINKAGE AR-FRONT

5I7287 LINKAGE AR-FRONT (LONG REACH) (PHASE II)
S/N 9KK1-Up
An Attachment
XEBP71830590 XEBP7183
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5I-7216 Y [1] BOOM GP  
  5I-7218 Y [1] STICK GP  
  7Y-6397 Y [1] LOCK GP  
  4I-1721 Y [1] STICK CYLINDER GP  
  4I-7649 Y [1] BUCKET CYLINDER GP  
  7Y-5450 Y [1] LIGHTING GP  
  5I-7222 Y [1] LINES GP  
  5I-7232 Y [1] LINES GP  
  7Y-6398 Y [1] LINKAGE GP  
  5I-7235 Y [1] LINES GP  
  5I-7237 Y [1] LINES GP  
  5I-7242 Y [1] LINES GP  
  7I-8367 Y [1] COUNTERWEIGHT GP  
  Y [1] FILM GP  
  4I-1876 Y [1] BOOM CYLINDER GP  
  Y   SEPARATE ILLUSTRATION
 

#XEBP71830591
 

087-5910: BOOM GP

0875910 R-BOOM GP (B) 5700MM (18.7 FT.)
Part of 0873695 R-Boom Ar listed on Page 407
An Attachment
h38297e XEBP7183
0875910 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0568 [1] BOOM AS  
2. 7Y-2396 [2] BEARING  
3. 7Y-2580 [1] MANIFOLD  
4. 093-0349 [2] WASHER (60mm OD)  
5. 8T-4123 [2] WASHER (35mm OD)  
6. 4I-4813 [1] PIN AS  
7. 093-0084 B [2] SHIM (1.0mm THICK)  
  7Y-2497 B [1] SHIM (1.6mm THICK)  
  093-0116 B [1] SHIM (2.0mm THICK)  
8. 093-0363 [1] SPACER  
9. 4I-4809 [1] PIN AS  
10. 093-0083 B [2] SHIM (1.0mm THICK)  
  7Y-2498 B [1] SHIM (1.6mm THICK)  
  093-0115 B [1] SHIM (2.0mm THICK)  
11. 8T-4956 [6] BOLT (35mm LONG)  
12. 8T-4223 [6] WASHER  
13. 4I-3308 [2] PLATE  
14. 4I-3309 [2] SPACER  
15. 4I-0465 [1] PIN  
16. 7X-4803 [2] SEAL  
17. 8T-4780 [2] BOLT (30mm LONG)  
18. 3B-8489 [1] FITTING  
19. 8T-6757 [1] PLUG  
  B   USE AS REQUIRED
 

#XEBP71830592
 

5I-7028: R-BOOM GP

5I7028 R-BOOM GP (D) 5700MM (18.7 FT.)
Type 1
Part of 5I7039 Lines Ar listed on Page 201
An Attachment
h38299e XEBP7183
5I7028 R-BOOM GP Parts scheme
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7029 [1] BOOM AS  
2. 7Y-2396 [2] BEARING  
3. 7Y-5915 [6] PLATE  
4. [2] PLATE  
5. 7Y-5918 [1] PLATE  
6. 7Y-5917 [2] PLATE  
7. 7Y-2580 [1] MANIFOLD  
8. 093-0363 [1] SPACER  
9. 4I-4809 [1] PIN AS  
10. 093-0083 B [2] SHIM (1.0mm THICK)  
  7Y-2498 B [1] SHIM (1.6mm THICK)  
  093-0115 B [1] SHIM (2.0mm THICK)  
11. 8T-4956 [6] BOLT (35mm LONG)  
12. 8T-4223 [6] WASHER  
13. 4I-3308 [2] PLATE  
14. 4I-3309 [2] SPACER  
15. 4I-0465 [1] PIN  
16. 7X-4803 [2] SEAL  
17. 8T-4780 [2] BOLT (30mm LONG)  
18. 3B-8489 [1] FITTING  
19. 8T-6757 [1] PLUG  
20. 093-0349 [2] WASHER (60mm OD)  
21. 8T-4123 [2] WASHER (35mm OD)  
22. 4I-4813 [1] PIN AS  
23. 093-0084 B [2] SHIM (1.0mm THICK)  
  7Y-2497 B [1] SHIM (1.6mm THICK)  
  093-0116 B [1] SHIM (2.0mm THICK)  
  B   USE AS REQUIRED
 

#XEBP71830593
 

5I-7028: R-BOOM GP

5I7028 R-BOOM GP (D) 5700MM (18.7 FT.)
Type 2
Part of 5I7039 Lines Ar listed on Page 201
An Attachment
h38300e XEBP7183
5I7028 R-BOOM GP Parts scheme
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-8527 C [1] BOOM AS  
2. 7Y-2396 [2] BEARING  
3. 7I-8419 C [6] PLATE  
4. 7I-8418 C [2] PLATE  
5. 7Y-5918 [1] PLATE  
6. 7I-8532 C [2] PLATE  
7. 7Y-2580 [1] MANIFOLD  
8. 093-0363 [1] SPACER  
9. 4I-4809 [1] PIN AS  
10. 093-0083 B [2] SHIM (1.0mm THICK)  
  7Y-2498 B [1] SHIM (1.6mm THICK)  
  093-0115 B [1] SHIM (2.0mm THICK)  
11. 8T-4956 [6] BOLT (35mm LONG)  
12. 8T-4223 [6] WASHER  
13. 4I-3308 [2] PLATE  
14. 4I-3309 [2] SPACER  
15. 4I-0465 [1] PIN  
16. 7X-4803 [2] SEAL  
17. 8T-4780 [2] BOLT (30mm LONG)  
18. 3B-8489 [1] FITTING  
19. 8T-6757 [1] PLUG  
20. 093-0349 [2] WASHER (60mm OD)  
21. 8T-4123 [2] WASHER (35mm OD)  
22. 4I-4813 [1] PIN AS  
23. 093-0084 B [2] SHIM (1.0mm THICK)  
  7Y-2497 B [1] SHIM (1.6mm THICK)  
  093-0116 B [1] SHIM (2.0mm THICK)  
  B   USE AS REQUIRED
  C   INDICATES CHANGE
 

#XEBP71830594
 

4I-0495: BOOM GP

4I0495 M-BOOM GP (B) 5200 MM (17.1 FT.)
Part of 0873703 M-Boom Ar listed on Page 407
An Attachment
h38301e XEBP7183
4I0495 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-4483 [1] BOOM AS  
2. 7Y-2396 [2] BEARING  
3. 7Y-2580 [1] MANIFOLD  
4. 093-0349 [2] WASHER (60mm OD)  
5. 8T-4123 [2] WASHER (35mm OD)  
6. 4I-4813 [1] PIN AS  
7. 093-0084 B [2] SHIM (1.0mm THICK)  
  7Y-2497 B [1] SHIM (1.6mm THICK)  
  093-0116 B [1] SHIM (2.0mm THICK)  
8. 093-0363 [1] SPACER  
9. 4I-4809 [1] PIN AS  
10. 093-0083 B [2] SHIM (1.0mm THICK)  
  7Y-2498 B [1] SHIM (1.6mm THICK)  
  093-0115 B [1] SHIM (2.0mm THICK)  
11. 8T-4956 [6] BOLT (35mm LONG)  
12. 8T-4223 [6] WASHER  
13. 4I-3308 [2] PLATE  
14. 4I-3309 [2] SPACER  
15. 4I-0465 [1] PIN  
16. 7X-4803 [2] SEAL  
17. 8T-4780 [2] BOLT (30mm LONG)  
18. 3B-8489 [1] FITTING  
19. 8T-6757 [1] PLUG  
  B   USE AS REQUIRED
 

#XEBP71830595
 

5I-7013: M-BOOM GP

5I7013 M-BOOM GP (D) 5200 MM (17.1 FT.)
Type 1
Part of 5I7040 Lines Ar listed on Page 201
An Attachment
h38303e XEBP7183
5I7013 M-BOOM GP Parts scheme
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7014 [1] BOOM AS  
2. 7Y-2396 [2] BEARING  
3. 7Y-5915 [4] PLATE  
4. [4] PLATE  
5. 7Y-5918 [1] PLATE  
6. 7Y-5917 [2] PLATE  
7. 7Y-2580 [1] MANIFOLD  
8. 093-0363 [1] SPACER  
9. 4I-4809 [1] PIN AS  
10. 093-0083 B [2] SHIM (1.0mm THICK)  
  7Y-2498 B [1] SHIM (1.6mm THICK)  
  093-0115 B [1] SHIM (2.0mm THICK)  
11. 8T-4956 [6] BOLT (35mm LONG)  
12. 8T-4223 [6] WASHER  
13. 4I-3308 [2] PLATE  
14. 4I-3309 [2] SPACER  
15. 4I-0465 [1] PIN  
16. 7X-4803 [2] SEAL  
17. 8T-4780 [2] BOLT (30mm LONG)  
18. 3B-8489 [1] FITTING  
19. 8T-6757 [1] PLUG  
20. 093-0349 [2] WASHER (60mm OD)  
21. 8T-4123 [2] WASHER (35mm OD)  
22. 4I-4813 [1] PIN AS  
23. 093-0084 B [2] SHIM (1.0mm THICK)  
  7Y-2497 B [1] SHIM (1.6mm THICK)  
  093-0116 B [1] SHIM (2.0mm THICK)  
  B   USE AS REQUIRED
 

#XEBP71830596
 

5I-7013: M-BOOM GP

5I7013 M-BOOM GP (D) 5200 MM (17.1 FT.)
Type 2
Part of 5I7040 Lines Ar listed on Page 201
An Attachment
h38304e XEBP7183
5I7013 M-BOOM GP Parts scheme
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-8525 C [1] BOOM AS  
2. 7Y-2396 [2] BEARING  
3. 7I-8418 C [4] PLATE  
4. 7I-8419 C [4] PLATE  
5. 7Y-5918 [1] PLATE  
6. 7I-8532 C [2] PLATE  
7. 7Y-2580 [1] MANIFOLD  
8. 093-0363 [1] SPACER  
9. 4I-4809 [1] PIN AS  
10. 093-0083 B [2] SHIM (1.0mm THICK)  
  7Y-2498 B [1] SHIM (1.6mm THICK)  
  093-0115 B [1] SHIM (2.0mm THICK)  
11. 8T-4956 [6] BOLT (35mm LONG)  
12. 8T-4223 [6] WASHER  
13. 4I-3308 [2] PLATE  
14. 4I-3309 [2] SPACER  
15. 4I-0465 [1] PIN  
16. 7X-4803 [2] SEAL  
17. 8T-4780 [2] BOLT (30mm LONG)  
18. 3B-8489 [1] FITTING  
19. 8T-6757 [1] PLUG  
20. 093-0349 [2] WASHER (60mm OD)  
21. 8T-4123 [2] WASHER (35mm OD)  
22. 4I-4813 [1] PIN AS  
23. 093-0084 B [2] SHIM (1.0mm THICK)  
  7Y-2497 B [1] SHIM (1.6mm THICK)  
  093-0116 B [1] SHIM (2.0mm THICK)  
  B   USE AS REQUIRED
  C   INDICATES CHANGE
 

#XEBP71830597
 

5I-7216: BOOM GP

5I7216 BOOM GP (B)
S/N 9KK1-Up
Part of 5I7287 Linkage Ar listed on Page 413
An Attachment
h41855e XEBP7183
5I7216 BOOM GP Parts scheme
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7215 [1] BOOM AS  
2. 7Y-2580 [1] MANIFOLD  
3. 7Y-2396 [2] BEARING  
4. 4I-4618 [1] PIN AS  
5. 8T-4123 [2] WASHER (35mm OD)  
6. 093-0349 [2] WASHER (60mm OD)  
7. 8T-4780 [2] BOLT (30mm LONG)  
8. 093-0083 B [2] SHIM (1.0mm THICK)  
  7Y-2498 B [1] SHIM (1.6mm THICK)  
  093-0115 B [1] SHIM (2.0mm THICK)  
9. 4I-4813 [1] PIN AS  
10. 093-0116 B [1] SHIM (2.0mm THICK)  
  7Y-2497 B [1] SHIM (1.6mm THICK)  
  093-0084 B [2] SHIM (1.0mm THICK)  
11. 8T-4956 [6] BOLT (35mm LONG)  
12. 8T-4223 [6] WASHER  
13. 4I-3308 [2] PLATE  
14. 4I-3309 [2] SPACER  
15. 4I-0465 [1] PIN  
16. 093-1380 [2] SEAL  
17. 093-0363 [1] SPACER  
  B   USE AS REQUIRED
 

#XEBP71830598
 

4I-0497: STICK GP-HOE

4I0497 R3.9B STICK GP-HOE (12.8 FT.)
Type 1
Part of 0873705 R3.9B Stick Ar listed on Page 408
An Attachment
h31489e XEBP7183
4I0497 STICK GP-HOE Parts scheme
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4780 [2] BOLT  
2. 093-0349 [2] WASHER (60mm OD)  
3. 8T-4123 [2] WASHER (35mm OD)  
4. 4I-4811 [1] PIN AS  
5. 093-0369 [1] SPACER  
6. 5I-3793 [1] STICK AS  
7. 7Y-3427 [2] BEARING  
8. 7Y-2395 [2] BEARING  
9. 7Y-2396 [2] BEARING  
10. 096-0854 [2] SEAL  
11. 3B-8489 [1] FITTING  
12. 093-1434 [2] SEAL  
13. 7X-4803 [2] SEAL  
14. 093-0083 B [2] SHIM (1.0mm THICK)  
  7Y-2498 B [1] SHIM (1.6mm THICK)  
  093-0115 B [1] SHIM (2.0mm THICK)  
15. 4I-4809 [1] PIN AS  
16. 093-0363 [1] SPACER  
17. 093-0086 B [2] SHIM (1.0mm THICK)  
  7Y-2496 B [1] SHIM (1.6mm THICK)  
  093-0118 B [1] SHIM (2.0mm THICK)  
  B   USE AS REQUIRED
 

#XEBP71830599
 

4I-0497: STICK GP-HOE

4I0497 R3.9B STICK GP-HOE (12.8 FT.)
Type 2
Part of 0873705 R3.9B Stick Ar listed on Page 408
An Attachment
h36114e XEBP7183
4I0497 STICK GP-HOE Parts scheme
  For full view, you need register

Parts for your 320-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4780 [2] BOLT (30mm LONG)  
2. 093-0349 [2] WASHER (60mm OD)  
3. 8T-4123 [2] WASHER (35mm OD)  
4. 4I-4811 [1] PIN AS  
5. 093-0369 [1] SPACER  
6. 5I-3793 [1] STICK AS  
7. 7Y-3427 [2] BEARING  
8. 7Y-2395 [2] BEARING  
9. 7Y-2396 [2] BEARING  
10. 102-1119 [2] PLATE  
11. 3B-8489 [1] FITTING  
12. 093-1434 [2] SEAL  
13. 7X-4803 [2] SEAL  
14. 093-0083 B [2] SHIM (1.0mm THICK)  
  7Y-2498 B [1] SHIM (1.6mm THICK)  
  093-0115 B [1] SHIM (2.0mm THICK)  
15. 4I-4809 [1] PIN AS  
16. 093-0363 [1] SPACER  
17. 093-0086 B [2] SHIM (1.0mm THICK)  
  7Y-2496 B [1] SHIM (1.6mm THICK)  
  093-0118 B [1] SHIM (2.0mm THICK)  
18. 096-0854 [2] SEAL  
  B   USE AS REQUIRED
 

Information:

Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Disassembly and Assembly
Bucket Linkage Group
320, 320 L & 320 N EXCAVATORS VEHICLE SYSTEMS

Caterpillar Parts SIS Catalog 320-A :

087-3699 LINKAGE AR-BUCKET
7Y-0084 LINKAGE AR-BUCKET
087-3699 LINKAGE AR-BUCKET
087-3713 STICK AR-HOE
087-3712 STICK AR-HOE
087-3710 M2.9B STICK AR-HOE
087-3709 STICK AR-HOE
087-3707 R2.5B STICK AR-HOE
BOOM GP
087-5910 BOOM GP
R-BOOM GP
5I-7028 R-BOOM GP
R-BOOM GP
5I-7028 R-BOOM GP
BOOM GP
4I-0495 BOOM GP
M-BOOM GP
5I-7013 M-BOOM GP
M-BOOM GP
5I-7013 M-BOOM GP
BOOM GP
5I-7216 BOOM GP
STICK GP-HOE
4I-0497 STICK GP-HOE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.