AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1148222 DRIVE GP-FINAL (D) (W/MOTOR) - 2 REQUIRED - PART 2 OF 2 S/N 6GK00678-Up 1107080--Page 112 312-A


POWER TRAIN
DRIVE GP-FINAL
HYDRAULIC SYSTEM
DRIVE GP

EXCAVATOR 312-A EXCAVATOR 6GK
 312 TRACK-TYPE EXCAVATOR 6GK00001-UP (MACHINE) POWERED BY 3064 ENGINE XEBP7201 312-A 6GK   (1993)

POWER TRAIN

DRIVE GP-FINAL
FASTENER GP
4I-7334 FASTENER GP
FINAL DRIVE GP
110-7079 FINAL DRIVE GP
FINAL DRIVE GP
110-7079 FINAL DRIVE GP
FINAL DRIVE GP
114-8222 FINAL DRIVE GP
FINAL DRIVE GP
114-8222 FINAL DRIVE GP
FINAL DRIVE GP
110-7080 FINAL DRIVE GP
CARRIER AS-PLANET
7I-7630 CARRIER AS-PLANET
CARRIER AS-PLANET
099-0230 CARRIER AS-PLANET
CARRIER AS-PLANET
114-8232 CARRIER AS-PLANET
CARRIER AS-PLANET
108-9188 CARRIER AS-PLANET
 

#XEBP72010150
 

114-8222: FINAL DRIVE GP

1148222 DRIVE GP-FINAL (D) (W/MOTOR) - 2 REQUIRED - PART 2 OF 2
S/N 6GK00678-Up
1107080--Page 112
h42151e XEBP7201
1148222 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-7080 Y [1] DRIVE GP  
2. 1R-5871 [1] SEAL  
3. 7I-1082 [1] SPRING  
4. 7I-1084 [1] PLATE  
5. 7I-1086 [1] BARREL  
6. 7I-1088 [1] PISTON  
7. 096-4377 [1] SEAL  
8. 1R-5883 [1] RING  
9. 096-1521 B [1] SHIM (1.0mm THICK)  
  096-3785 B [1] SHIM (1.2mm THICK)  
  096-3786 B [1] SHIM (1.4mm THICK)  
  096-3787 B [1] SHIM (1.6mm THICK)  
  096-3788 B [1] SHIM (1.8mm THICK)  
  096-1522 B [1] SHIM (2.0mm THICK)  
10. 095-0687 [10] BOLT (45mm LONG)  
11. 8T-6759 [8] PLUG  
12. 1R-5881 [2] SPRING  
13. 7I-1104 [2] PLUG  
14. 3Y-9267 [2] BALL  
15. 4I-9426 [1] RING  
16. 7I-1110 [1] SPRING  
17. 095-0882 [1] PIN  
18. 095-1585 [1] SEAL  
19. 095-7381 [1] VALVE  
20. 095-7382 [1] RETAINER  
21. 1R-5879 [2] PLATE (3.1mm THICK)  
22. 7I-1121 [1] PISTON AS  
  [9] PISTON AS  
23. 7I-1122 [1] GUIDE  
24. 1R-5874 [2] BALL  
25. 096-1445 [1] PLUG  
26. 095-0966 [2] PLUG  
27. 114-8231 [4] SCREW  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  7I-1277 [1] SEAL KIT  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010151
 

110-7080: FINAL DRIVE GP

1107080 DRIVE GP-FINAL (D) (W/O MOTOR)
Part of 1107079 and 1148222 Drive listed on Pages 111 and 111.02
h38588e XEBP7201
1107080 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5A-3604 [16] BOLT (25mm LONG)  
2. 3B-4505 [16] LOCKWASHER  
3. 6I-6523 [1] HOUSING  
4. 1R-5839 [1] NUT  
5. 1R-5838 [2] BEARING  
6. 099-0198 [1] SEAL GP  
7. 110-7081 [1] HOUSING  
8. 5I-4898 [1] DOWEL  
9. 5I-4897 [1] WASHER  
10. 6I-6530 [4] PLATE  
11. 1R-5846 [4] GEAR  
12. 1R-5848 [4] BEARING  
13. 1R-5847 [4] RACE  
14. 1R-5844 [1] CARRIER  
15. 1R-5842 [3] GEAR  
16. 1R-5843 [3] BEARING  
17. 6I-6537 [1] COVER  
18. 095-0968 [2] PLUG  
19. 1R-5852 [1] PLATE  
20. 1R-5854 [8] SCREW  
21. 1R-5851 [1] PLATE  
22. 1R-5850 [1] PLATE  
23. 095-0967 [1] PLUG  
24. 6I-6544 [1] GEAR  
25. 1R-5845 [1] GEAR  
26. 1R-5849 [1] RING  
27. 1U-8846 B GASKET MAKER (10ml)  
  B   USE AS REQUIRED
 

#XEBP72010152
 

4I-7327: DRIVE GP-SWING

4I7327 DRIVE GP-SWING (A) (W/MOTOR)
S/N 6GK1--00392
7I7764--Page 113
h33834e XEBP7201
4I7327 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-7762 [1] PIPE  
2. 094-1540 [1] GAUGE  
3. 7I-7764 Y [1] DRIVE GP  
4. 1B-5174 [1] PLUG  
5. 4B-5984 [1] ELBOW  
6. 4I-7470 [1] NIPPLE  
7. 4I-7509 [1] BREATHER AS  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010153
 

7I-7764: DRIVE GP-SWING

7I7764 DRIVE GP-SWING (A) (W/MOTOR)
TYPE 1 S/N 6GK1--00392
Part of 4I7327 Drive listed on Page 113
7I7761--Page 115, 4I7646--Page 218
h33835e XEBP7201
7I7764 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7646 Y [1] MOTOR GP  
2. 7I-7761 Y [1] DRIVE GP  
3. 8T-5041 [12] BOLT (120mm LONG)  
4. 8T-4223 [12] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010154
 

7I-7764: DRIVE GP-SWING

7I7764 DRIVE GP-SWING (A) (W/MOTOR)
TYPE 2 S/N 6GK1--00392
Part of 4I7327 Drive listed on Page 113
1148226--Page 115.02, 4I7646--Page 218
h37936e XEBP7201
7I7764 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7646 Y [1] MOTOR GP  
2. 114-8226 Y [1] DRIVE GP  
3. 8T-5041 [12] BOLT (120mm LONG)  
4. 8T-4223 [12] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010155
 

4I-7599: DRIVE GP-SWING

4I7599 DRIVE GP-SWING (A) (W/MOTOR)
S/N 6GK00393-Up
7I7763--Page 114
h32362e XEBP7201
4I7599 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-7762 [1] PIPE  
2. 094-1540 [1] GAUGE  
3. 7I-7763 Y [1] DRIVE GP  
4. 1B-5174 [1] PLUG  
5. 4B-5984 [1] ELBOW  
6. 4I-7470 [1] NIPPLE  
7. 4I-7509 [1] BREATHER AS  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010156
 

7I-7763: DRIVE GP-SWING

7I7763 DRIVE GP-SWING (A) (W/MOTOR)
TYPE 1 S/N 6GK00393-Up
Part of 4I7599 Drive listed on Page 114
7I7761--Page 115, 7I8267--Page 220
h32363e XEBP7201
7I7763 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-8267 Y [1] MOTOR GP  
2. 7I-7761 Y [1] DRIVE GP  
3. 8T-5041 [12] BOLT (120mm LONG)  
4. 8T-4223 [12] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010157
 

7I-7763: DRIVE GP-SWING

7I7763 DRIVE GP-SWING (A) (W/MOTOR)
TYPE 2 S/N 6GK00393-Up
Part of 4I7599 Drive listed on Page 114
1148226--Page 115.02, 7I8267--Page 220
h37935e XEBP7201
7I7763 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-8267 Y [1] MOTOR GP  
2. 114-8226 Y [1] DRIVE GP  
3. 8T-5041 [12] BOLT (120mm LONG)  
4. 8T-4223 [12] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010158
 

7I-7761: DRIVE GP-SWING

7I7761 DRIVE GP-SWING (A)
TYPE 1 Part of 7I7764 and 7I7763 Drive listed on Pages 113 and 114
7I7630, 0990230--Page 116
h32364e XEBP7201
7I7761 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-7627 [1] GEAR (14 TEETH)  
2. 093-6087 [1] RING  
3. 099-0230 Y [1] CARRIER AS  
4. 7I-7630 Y [1] CARRIER AS  
5. 093-6088 [2] SEAL  
6. 7I-7676 [1] GEAR (74 TEETH)  
7. 093-6089 [2] DOWEL  
8. 7I-7628 [1] HOUSING  
9. 7I-7625 [1] BEARING AS  
10. 7I-7632 B [1] SPACER (69.50mm THICK)  
  7I-7633 B [1] SPACER (69.80mm THICK)  
  7I-7634 B [1] SPACER (70.10mm THICK)  
  7I-7635 B [1] SPACER (70.40mm THICK)  
  7I-7636 B [1] SPACER (70.70mm THICK)  
11. 7I-7626 [1] BEARING AS  
12. 099-0235 [1] CAGE  
13. 099-0233 [1] SEAL  
14. 7I-7629 [1] SHAFT  
15. 8T-4195 [8] BOLT (30mm LONG)  
16. 8T-4121 [8] WASHER  
17. 1U-8846 B GASKET MAKER (3 ml)  
18. 7I-7638 B [1] SPACER (10.00mm THICK)  
  7I-7639 B [1] SPACER (10.03mm THICK)  
  7I-7640 B [1] SPACER (10.05mm THICK)  
  7I-7641 B [1] SPACER (10.08mm THICK)  
  7I-7642 B [1] SPACER (10.10mm THICK)  
  7I-7643 B [1] SPACER (10.12mm THICK)  
  7I-7644 B [1] SPACER (10.15mm THICK)  
  7I-7645 B [1] SPACER (10.18mm THICK)  
  7I-7646 B [1] SPACER (10.20mm THICK)  
  7I-7647 B [1] SPACER (10.23mm THICK)  
  7I-7648 B [1] SPACER (10.25mm THICK)  
  7I-7649 B [1] SPACER (10.28mm THICK)  
19. 093-8768 [1] GEAR (22 TEETH)  
20. 093-6096 [1] BOLT (55mm LONG)  
21. 093-6098 [1] WASHER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010159
 

7I-7761: DRIVE GP-SWING

7I7761 DRIVE GP-SWING (A)
TYPE 2 Part of 7I7764 and 7I7763 Drive listed on Pages 113 and 114
7I7630--Page 116, 1089188--PAGE 117
h37934e XEBP7201
7I7761 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-7627 [1] GEAR (14 TEETH)  
2. 093-6087 [1] RING  
3. 108-9188 Y [1] CARRIER AS  
4. 7I-7630 Y [1] CARRIER AS  
5. 093-6088 [2] SEAL  
6. 7I-7676 [1] GEAR (74 TEETH)  
7. 093-6089 [2] DOWEL  
8. 7I-7628 [1] HOUSING  
9. 7I-7625 [1] BEARING AS  
10. 7I-7632 B [1] SPACER (69.50mm THICK)  
  7I-7633 B [1] SPACER (69.80mm THICK)  
  7I-7634 B [1] SPACER (70.10mm THICK)  
  7I-7635 B [1] SPACER (70.40mm THICK)  
  7I-7636 B [1] SPACER (70.70mm THICK)  
11. 7I-7626 [1] BEARING AS  
12. 099-0235 [1] CAGE  
13. 099-0233 [1] SEAL  
14. 7I-7629 [1] SHAFT  
15. 8T-4195 [8] BOLT (30mm LONG)  
16. 8T-4121 [8] WASHER  
17. 1U-8846 B GASKET MAKER (3 ml)  
18. 7I-7638 B [1] SPACER (10.00mm THICK)  
  7I-7639 B [1] SPACER (10.03mm THICK)  
  7I-7640 B [1] SPACER (10.05mm THICK)  
  7I-7641 B [1] SPACER (10.08mm THICK)  
  7I-7642 B [1] SPACER (10.10mm THICK)  
  7I-7643 B [1] SPACER (10.12mm THICK)  
  7I-7644 B [1] SPACER (10.15mm THICK)  
  7I-7645 B [1] SPACER (10.18mm THICK)  
  7I-7646 B [1] SPACER (10.20mm THICK)  
  7I-7647 B [1] SPACER (10.23mm THICK)  
  7I-7648 B [1] SPACER (10.25mm THICK)  
  7I-7649 B [1] SPACER (10.28mm THICK)  
19. 093-8768 [1] GEAR (22 TEETH)  
20. 093-6096 [1] BOLT (55mm LONG)  
21. 093-6098 [1] WASHER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Service Letter-NACD
Product Support Program For Reworking The Spool Assembly In The Final Drive Of Certain 312 Excavators
Product Support Program For Reworking The Spool Assembly In The Final Drive Of Certain 312 Excavators
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
Product Support Program For Reworking The Spool Assembly In The Final Drive Of Certain 312 Excavators
Product Support Program For Reworking The Spool Assembly In The Final Drive Of Certain 312 Excavators
Service Letter-Asia
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
Product Support Program For Reworking The Spool Assembly In The Final Drive Of Certain 312 Excavators
Product Support Program For Reworking The Spool Assembly In The Final Drive Of Certain 312 Excavators
Disassembly and Assembly
Duo-Cone Seals
311 AND 312 EXCAVATORS MACHINE SYSTEMS
Travel Motor & Final Drive
311 AND 312 EXCAVATORS MACHINE SYSTEMS
Service Magazine
New Final Drive Is Now Used To Prevent Oil Leaks And Increase Housing Strength {4056,4050}
1996/10/07
Use Spanner Wrench To Remove And Install Ring Nuts From Travel Drives {4350,4351}
1998/03/30
Tightening Procedure Is Changed For The Bolts That Hold The Sprocket To The Final Drive{4164}
1999/03/01
New Procedure for Checking Rolling Torque {4050, 7551}
2000/04/03
Correction to Disassembly and Assembly , "Final Drive Sprockets" {4164}
2001/11/12
Correction to Service Magazine , "New Procedure for Checking Rolling Torque" {4050, 7551}
2004/02/09
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Managing the Life Cycles of Excavator Final Drives {4050}
2007/06/04
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Final Drive Motor Housings Are Available for Certain Excavators {4050}
Final Drive Motor Housings Are Available for Certain Excavators {4050}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 312-A :

FINAL DRIVE GP
114-8222 FINAL DRIVE GP
FINAL DRIVE GP
110-7079 FINAL DRIVE GP
FINAL DRIVE GP
110-7079 FINAL DRIVE GP
SPROCKET GP
4I-7341 SPROCKET GP
FASTENER GP
4I-7334 FASTENER GP
LAMP GP-FLOOD
5I-8251 LAMP GP-FLOOD
LAMP GP-FLOOD
5I-8250 LAMP GP-FLOOD
LIGHTING GP-2 LAMP
7Y-8189 LIGHTING GP-2 LAMP
FINAL DRIVE GP
110-7080 FINAL DRIVE GP
DRIVE GP-SWING
4I-7327 DRIVE GP-SWING
DRIVE GP-SWING
7I-7764 DRIVE GP-SWING
DRIVE GP-SWING
7I-7764 DRIVE GP-SWING
DRIVE GP-SWING
4I-7599 DRIVE GP-SWING
DRIVE GP-SWING
7I-7763 DRIVE GP-SWING
DRIVE GP-SWING
7I-7763 DRIVE GP-SWING
DRIVE GP-SWING
7I-7761 DRIVE GP-SWING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.