AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4I7350 TRACK GP-600 MM (24 IN.) TRIPLE GROUSER SHOE-2 REQUIRED An Attachment 312-A EXCAVATOR


UNDERCARRIAGE
TRACK GP
HYDRAULIC SYSTEM
TANK GP
FILTER GP
PUMP GP

EXCAVATOR 312-A EXCAVATOR 6GK
 312 TRACK-TYPE EXCAVATOR 6GK00001-UP (MACHINE) POWERED BY 3064 ENGINE XEBP7201 312-A 6GK   (1993)

UNDERCARRIAGE

TRACK GP
ROLLER AR
4I-7344 ROLLER AR
4I-7348 TRACK GP
4I-7350 TRACK GP
4I-7352 TRACK GP
4I-7354 TRACK GP
LINK AS-TRACK
4I-7480 LINK AS-TRACK
 

#XEBP72010200
 

4I-7350: TRACK GP

4I7350 TRACK GP-600 MM (24 IN.) TRIPLE GROUSER SHOE-2 REQUIRED
An Attachment
XEBP72010200 XEBP7201
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4I-7480 Y [1] LINK AS-TRACK  
  1R-6009 [43] SHOE-TRACK  
  4I-7538 [172] BOLT-TRACK (46mm LONG)  
  5I-6125 [172] NUT-TRACK  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010201
 

4I-7352: TRACK GP

4I7352 TRACK GP-700 MM (28 IN.) TRIPLE GROUSER SHOE-2 REQUIRED
An Attachment
XEBP72010201 XEBP7201
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4I-7480 Y [1] LINK AS-TRACK  
  1R-6010 [43] SHOE-TRACK  
  4I-7538 [172] BOLT-TRACK (46mm LONG)  
  5I-6125 [172] NUT-TRACK  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010202
 

4I-7354: TRACK GP

4I7354 TRACK GP-770 MM (30 IN.) TRIPLE GROUSER SHOE-2 REQUIRED
An Attachment
XEBP72010202 XEBP7201
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4I-7480 Y [1] LINK AS-TRACK  
  1R-6011 [43] SHOE-TRACK  
  4I-7538 [172] BOLT-TRACK (46mm LONG)  
  5I-6125 [172] NUT-TRACK  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010203
 

4I-7480: LINK AS-TRACK

4I7480 LINK AS-TRACK
Part of 4I7348, 4I7350, 4I7352 and 4I7354 Track listed on Pages 145 and 146
h31579e XEBP7201
4I7480 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7475 [42] LINK  
2. 095-0863 [1] COTTER  
3. 4I-7477 [1] LINK  
4. 093-1887 [1] BUSHING  
5. 4I-7478 [1] LINK  
6. 099-0653 [1] PIN  
7. 093-0037 [2] SPACER  
8. 4I-7476 [42] LINK  
9. 5I-6140 [42] PIN  
10. 4I-7473 [84] SEAL  
11. 6I-6446 [42] BUSHING  
 

#XEBP72010204
 

4I-7600: TANK & MOUNTING GP-HYDRAULIC

4I7600 TANK GP-MOUNTING & (HYDRAULIC)
1148208--Page 149
h37966e XEBP7201
4I7600 TANK & MOUNTING GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-8208 Y [1] TANK GP  
2. 087-8737 B [4] SHIM (2.0mm THICK)  
  087-8738 B [4] SHIM (1.0mm THICK)  
  087-8740 B [4] SHIM (0.4mm THICK)  
3. 8T-4193 [4] BOLT (50mm LONG)  
4. 6I-6123 [4] SPACER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010205
 

114-8208: TANK & FILTER GP

7I8194 TANK GP-FILTER & -150L
Part of 4I7600 Tank listed on Page 148
1057450--Page 150
h42408e XEBP7201
1148208 TANK & FILTER GP Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-8272 E GUARD (15cm)  
2. 5M-2057 [1] SEAL  
3. 105-2652 [1] PLUG  
4. 7I-1316 [1] HOSE  
5. 094-3229 [1] ELEMENT  
6. 094-1416 [1] VALVE AS  
7. 094-3232 [1] SPRING  
8. 095-1730 [2] SEAL  
9. 093-1588 [1] COVER  
10. 095-1608 [1] SEAL  
11. 7Y-4714 [1] COVER AS  
12. 105-7450 Y [1] SCREEN GP  
13. 8T-4137 [12] BOLT (20mm LONG)  
14. 8T-4121 [12] WASHER  
15. 8T-4191 [1] BOLT (16mm LONG)  
16. 099-4273 [1] GASKET  
17. 4I-3745 [1] CAP  
18. 096-6099 [1] CLAMP  
19. 8M-2770 [1] CLIP  
20. 4I-5394 [1] SENDER  
21. 3K-0360 [1] SEAL  
22. 9J-7031 [1] PLUG  
23. 094-3245 [1] GAUGE AS  
24. 095-1514 [4] SEAL  
25. 095-1517 [4] SEAL  
26. 096-4754 [1] PIPE  
27. 7Y-4754 [2] BLOCK  
28. 094-3247 [2] BOLT  
29. 6C-8496 [1] WASHER  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010206
 

105-7450: SCREEN GP

1057450 SCREEN GP
Part of 1148208 Tank listed on Page 149
h32063e XEBP7201
1057450 SCREEN GP Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-6641 [1] GUIDE  
2. 095-6639 [1] SPRING  
3. 096-2915 [1] ROD  
4. 8T-4133 [2] NUT  
5. 099-4776 [1] SCREEN AS  
6. 099-4780 [1] SEAL  
 

#XEBP72010207
 

4I-7359: PUMP & MOUNTING GP

4I7359 PUMP GP-MOUNTING &
4I7634--Page 152, 4I7360--Page 160
h31585e XEBP7201
4I7359 PUMP & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7634 Y [1] PUMP GP  
2. 8T-4136 [12] BOLT (25mm LONG)  
3. 8T-4121 [12] WASHER  
4. 4I-7360 Y [1] COUPLING GP  
5. 6I-6424 [1] COVER  
6. 8T-4140 [4] BOLT (60mm LONG)  
7. 8T-4132 [4] NUT  
8. 9X-8257 [4] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010208
 

4I-7634: PUMP GP-PISTON & GEAR

4I7634 PUMP GP-PISTON (SLIPPER) & GEAR
Part of 4I7359 Pump listed on Page 151
7I8265--Page 153
h35648e XEBP7201
4I7634 PUMP GP-PISTON & GEAR Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1023 [1] PUMP GP  
2. 7I-8265 Y [1] PUMP GP  
3. 095-1663 [1] SEAL  
4. 8T-1159 [4] BOLT (25mm LONG)  
5. 8T-4121 [4] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72010209
 

7I-8265: PUMP GP-DOUBLE PISTON

7I8265 PUMP GP-DOUBLE-PISTON (SLIPPER) -V-C-R
Part of 4I7634 Pump listed on Page 152
7I0149--Page 154, 5I8783--Page 156, 6I6789--Page 158
h35649e XEBP7201
7I8265 PUMP GP-DOUBLE PISTON Parts scheme
  For full view, you need register

Parts for your 312-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-0149 Y [1] PUMP GP  
2. 6I-6789 Y [1] VALVE GP  
3. 5I-8783 Y [1] VALVE GP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Undercarriage Reconditioning Bulletin
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Disassembly and Assembly
Track Assemblies
311 AND 312 EXCAVATORS MACHINE SYSTEMS
Hydraulic Track Adjusters
311 AND 312 EXCAVATORS MACHINE SYSTEMS
Service Magazine
Fill Valve For Track Adjuster Group Improved To Withstand Higher Pressures{4157}
1996/03/11
Torque Specifications For Track Shoe Bolts Are Identified{4150}
1996/05/20
Center Track Guide Guard Is Available {4151,4177}
1998/06/22
Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}

Caterpillar Parts SIS Catalog 312-A :

4I-7348 TRACK GP
GUARD GP-TRACK MOTOR
4I-6903 GUARD GP-TRACK MOTOR
ROLLER GP-TRACK-SINGLE FLANGE
4I-7346 ROLLER GP-TRACK-SINGLE FLANGE
ROLLER GP-TRACK CARRIER
4I-7345 ROLLER GP-TRACK CARRIER
ROLLER AR
4I-7344 ROLLER AR
ADJUSTMENT GP-HYDRAULIC TRACK
4I-7338 ADJUSTMENT GP-HYDRAULIC TRACK
ADJUSTMENT GP-HYDRAULIC TRACK
4I-7338 ADJUSTMENT GP-HYDRAULIC TRACK
SPRING GP-RECOIL
4I-7342 SPRING GP-RECOIL
4I-7352 TRACK GP
4I-7354 TRACK GP
LINK AS-TRACK
4I-7480 LINK AS-TRACK
TANK & MOUNTING GP-HYDRAULIC
4I-7600 TANK & MOUNTING GP-HYDRAULIC
TANK & FILTER GP
114-8208 TANK & FILTER GP
SCREEN GP
105-7450 SCREEN GP
PUMP & MOUNTING GP
4I-7359 PUMP & MOUNTING GP
PUMP GP-PISTON & GEAR
4I-7634 PUMP GP-PISTON & GEAR
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.