AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

315 315L TRACK-TYPE EXCAVATOR 4YM00001-UP (MACHINE) POWERED BY 3046 ENGINE BASIC ENGINE Caterpillar SIS



EXCAVATOR 315-A EXCAVATOR 4YM
 315 315L TRACK-TYPE EXCAVATOR 4YM00001-UP (MACHINE) POWERED BY 3046 ENGINE XEBP7224 315-A 4YM   (1994)

Parts group 315-A:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
116-9987 CAMSHAFT GP
1169987 CAMSHAFT GP
An Attachment
CRANKSHAFT GP
CRANKSHAFT GP
116-9988 CRANKSHAFT GP
1169988 CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER BLOCK AS
107-3675 CYLINDER BLOCK AS
1073675 CYLINDER BLOCK AS
Part of 1068230 Cylinder Block listed on Page 16
CYLINDER BLOCK GP
106-8230 CYLINDER BLOCK GP
1068230 CYLINDER BLOCK GP
1053675-Page 14
127-5924 COVER GP
1275924 COVER GP
Part of 1023830, 1275818 and 1347000 Engine Ar listed on Pages 11 and 11.01
CYLINDER HEAD GP
CYLINDER HEAD GP
106-8249 CYLINDER HEAD GP
1068249 CYLINDER HEAD GP
FLYWHEEL GP
FLYWHEEL GP
116-6715 FLYWHEEL GP
1166715 FLYWHEEL GP
GEAR GP
GEAR GP-FRONT
116-6710 GEAR GP-FRONT
1166710 GEAR GP-FRONT
HOUSING GP-FRONT
116-6713 HOUSING GP-FRONT
1166713 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
116-6718 HOUSING GP-FLYWHEEL
1166718 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
GEAR GP-FRONT
116-6710 GEAR GP-FRONT
1166710 GEAR GP-FRONT
HOUSING GP-FRONT
116-6713 HOUSING GP-FRONT
1166713 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
106-8236 LIFTING GP-ENGINE
1068236 LIFTING GP-ENGINE
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
102-3836 MOUNTING GP-ENGINE
1023836 MOUNTING GP-ENGINE
Part of 1023841 Installation Ar listed on Page 11
PAN GP-OIL
PAN GP-OIL
116-6722 PAN GP-OIL
1166722 PAN GP-OIL
PISTON & ROD GP
PISTON & ROD GP
106-8232 PISTON & ROD GP
1068232 PISTON & ROD GP
Part of 1171896 Engine Ar listed on Page 12
PISTON & ROD GP
128-3296 PISTON & ROD GP
1283296 PISTON & ROD GP
Part of 1376382 Engine Ar listed on Page 13.04
An Attachment
PULLEY GP
PULLEY GP-FAN DRIVE
116-6712 PULLEY GP-FAN DRIVE
1166712 PULLEY GP-FAN DRIVE
PULLEY GP-CRANKSHAFT
116-6711 PULLEY GP-CRANKSHAFT
1166711 PULLEY GP-CRANKSHAFT
VALVE MECHANISM GP
VALVE MECHANISM GP
106-8238 VALVE MECHANISM GP
1068238 VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
106-8248 COVER GP-VALVE MECHANISM
1068248 COVER GP-VALVE MECHANISM

Information:

(For parts list, see above)

Service Magazine
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Specifications
Belt Tension Chart
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
V-Belts
SUPPLEMENT FOR - 3046 ENGINE 315 & 315 L EXCAVATORS
Specifications
Camshaft
3046 Engine for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Excessive Bearing Wear - Inspect
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
3046 Engine For Caterpillar Built Machines
Camshaft - Remove and Install
3046 Engine For Caterpillar Built Machines
Service Letter-NACD
Product Support Program For Replacing Engine Crankshafts With Bending Failures in Certain D3C, D4C, And D5C Track-Type Tractors, 933 And 939 Track-Type Loaders, And 315 And 315L Excavators
Product Support Program For Replacing Engine Crankshafts With Bending Failures in Certain D3C, D4C, And D5C Track-Type Tractors, 933 And 939 Track-Type Loaders, And 315 And 315L Excavators
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Connecting Rod Bearing Journal
3046 Engine for Caterpillar Built Machines
Crankshaft Seals
3046 Engine for Caterpillar Built Machines
Main Bearing Journal
3046 Engine for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Service Letter-China
Product Support Program For Replacing Engine Crankshafts With Bending Failures in Certain D3C, D4C, And D5C Track-Type Tractors, 933 And 939 Track-Type Loaders, And 315 And 315L Excavators
Product Support Program For Replacing Engine Crankshafts With Bending Failures in Certain D3C, D4C, And D5C Track-Type Tractors, 933 And 939 Track-Type Loaders, And 315 And 315L Excavators
Service Letter-Asia
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Service Letter-APD
Product Support Program For Replacing Engine Crankshafts With Bending Failures in Certain D3C, D4C, And D5C Track-Type Tractors, 933 And 939 Track-Type Loaders, And 315 And 315L Excavators
Product Support Program For Replacing Engine Crankshafts With Bending Failures in Certain D3C, D4C, And D5C Track-Type Tractors, 933 And 939 Track-Type Loaders, And 315 And 315L Excavators
Testing and Adjusting
Excessive Bearing Wear - Inspect
3046 Engine for Caterpillar Built Machines
Main Bearings - Inspect
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3046 Engine For Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3046 Engine For Caterpillar Built Machines
Crankshaft Rear Seal - Install
3046 Engine For Caterpillar Built Machines
Crankshaft Front Seal - Remove
3046 Engine For Caterpillar Built Machines
Crankshaft Front Seal - Install
3046 Engine For Caterpillar Built Machines
Crankshaft - Remove
3046 Engine For Caterpillar Built Machines
Crankshaft - Install
3046 Engine For Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3046 Engine For Caterpillar Built Machines
Crankshaft Main Bearings - Install
3046 Engine For Caterpillar Built Machines
Crankshaft Gear - Remove and Install
3046 Engine For Caterpillar Built Machines
Service Magazine
Install Oil Seal Assembly And Wear Sleeve Assembly Onto Crankshaft With 127-1591 Installer {1161,0714}
1997/01/27
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3046 Engine for Caterpillar Built Machines
Main Bearing Journal
3046 Engine for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3046 Engine for Caterpillar Built Machines
Cylinder Block - Inspect
3046 Engine for Caterpillar Built Machines
Main Bearings - Inspect
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3046 Engine For Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3046 Engine For Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3046 Engine For Caterpillar Built Machines
Crankshaft Main Bearings - Install
3046 Engine For Caterpillar Built Machines
Service Magazine
A Piston Sleeve is Available to Repair the 3046 Engine Block {1222}
2001/12/10
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head Valves
3046 Engine for Caterpillar Built Machines
Fuel Injection Nozzles
3046 Engine for Caterpillar Built Machines
Cylinder Head
3046 Engine for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 &amp; C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Fuel Injection Nozzle - Test
3046 Engine for Caterpillar Built Machines
Valve Guide - Inspect
3046 Engine for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
3046 Engine for Caterpillar Built Machines
Cylinder Head - Inspect
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Inlet and Exhaust Valves - Remove and Install
3046 Engine For Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3046 Engine For Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3046 Engine For Caterpillar Built Machines
Inlet and Exhaust Valve Seals - Remove and Install
3046 Engine For Caterpillar Built Machines
Cylinder Head - Remove
3046 Engine For Caterpillar Built Machines
Cylinder Head - Install
3046 Engine For Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3046 Engine For Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
3046 Engine For Caterpillar Built Machines
Service Magazine
Use 4C-8134 Valve Seal Remover To Remove Valve Guide Seal{1104,0703}
1998/10/12
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Specifications
Vibration Damper and Pulley
3046 Engine for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3046 Engine For Caterpillar Built Machines
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
3046 Engine for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
3046 Engine For Caterpillar Built Machines
Flywheel - Install
3046 Engine For Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
3046 Engine for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
3046 Engine for Caterpillar Built Machines
Gear Group - Inspect
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove - Idler Gear Only
3046 Engine For Caterpillar Built Machines
Gear Group (Front) - Install - Idler Gear Only
3046 Engine For Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Testing and Adjusting
Flywheel Housing - Inspect
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
3046 Engine For Caterpillar Built Machines
Specifications
Crankshaft Seals
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Housing (Front) - Remove
3046 Engine For Caterpillar Built Machines
Housing (Front) - Install
3046 Engine For Caterpillar Built Machines
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
3046 Engine For Caterpillar Built Machines
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod Bearing Journal
3046 Engine for Caterpillar Built Machines
Piston and Rings
3046 Engine for Caterpillar Built Machines
Connecting Rod
3046 Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 &amp; C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
3046 Engine for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
3046 Engine for Caterpillar Built Machines
Piston Ring Groove - Inspect
3046 Engine for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
3046 Engine for Caterpillar Built Machines
Piston Height - Inspect
3046 Engine for Caterpillar Built Machines
Connecting Rod - Inspect
3046 Engine for Caterpillar Built Machines
Compression - Test
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3046 Engine For Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3046 Engine For Caterpillar Built Machines
Pistons and Connecting Rods - Install
3046 Engine For Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3046 Engine For Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3046 Engine For Caterpillar Built Machines
Connecting Rod Bearings - Remove
3046 Engine For Caterpillar Built Machines
Connecting Rod Bearings - Install
3046 Engine For Caterpillar Built Machines
Service Magazine
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Specifications
Vibration Damper and Pulley
3046 Engine for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3046 Engine For Caterpillar Built Machines
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
New Tools For 3046 Engines{0701}
1995/09/04
Install Oil Seal Assembly And Wear Sleeve Assembly Onto Crankshaft With 127-1591 Installer {1161,0714}
1997/01/27
Use 4C-8134 Valve Seal Remover To Remove Valve Guide Seal{1104,0703}
1998/10/12
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Belt Tension Chart
3046 Engine for Caterpillar Built Machines
Testing and Adjusting
Belt Tension Chart
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
V-Belts - Remove and Install
3046 Engine For Caterpillar Built Machines
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Specifications
Valve Mechanism
3046 Engine for Caterpillar Built Machines
Valve Mechanism Cover
3046 Engine for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Valve Depth - Inspect
3046 Engine for Caterpillar Built Machines
Finding Top Center Position for No. 1 Piston
3046 Engine for Caterpillar Built Machines
Valve Guide - Inspect
3046 Engine for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
3046 Engine for Caterpillar Built Machines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
3046 Engine For Caterpillar Built Machines
Rocker Shaft and Pushrod - Remove
3046 Engine For Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
3046 Engine For Caterpillar Built Machines
Rocker Shaft - Assemble
3046 Engine For Caterpillar Built Machines
Rocker Shaft - Disassemble
3046 Engine For Caterpillar Built Machines
Lifter Group - Remove and Install
3046 Engine For Caterpillar Built Machines
Service Magazine
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.