AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

5I7776 CYLINDER BLOCK GP 320-A N EXCAVATOR


BASIC ENGINE
CYLINDER BLOCK GP
VALVE MECHANISM GP
CRANKSHAFT GP
CAMSHAFT GP
PISTON & ROD GP
GEAR GP

EXCAVATOR 320-A N EXCAVATOR 1XM
 320, 320L & 320N TRACK-TYPE EXCAVATORS 1XM00001-UP (MACHINE) POWERED BY 3066 ENGINE XEBP7249 320-A N 1XM   (1993)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
5I-7776 CYLINDER BLOCK GP
CYLINDER BLOCK GP
5I-7970 CYLINDER BLOCK GP
 

#XEBP72490010
 

5I-7776: CYLINDER BLOCK GP

5I7776 CYLINDER BLOCK GP
h36274e XEBP7249
5I7776 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7613 [1] CRANKCASE AS  
2. 5I-7529 [1] BUSHING  
3. 5I-7528 [2] BUSHING  
4. 5I-8009 [1] BUSHING  
5. 5I-7672 [1] IDLER SHAFT AS  
6. 095-0879 [1] PIN  
7. 5I-7523 [6] SLEEVE (UN-FINISHED PARTS)  
8. 4I-9664 [2] PIN  
9. 099-4420 [2] PIN  
10. 095-2011 [1] CAP  
11. 5I-7505 [9] PLUG  
12. 3P-1896 [6] PLUG  
13. 5I-7525 [1] PLUG  
14. 5I-7524 [2] SEAL  
15. 094-7115 [14] BOLT  
16. 5I-7652 [1] BEARING CAP SET (UN-FINISHED PARTS)  
17. 6V-8236 [6] PIN  
18. 5I-7724 [2] PIN  
19. 096-3741 [5] CAP  
20. 5I-7526 [12] VALVE  
21. 8T-4191 [1] BOLT  
22. 095-2039 [1] WASHER  
23. 095-2005 [2] CAP  
24. 096-2501 [3] WASHER  
25. 8T-4179 [3] BOLT  
26. 5I-7588 [7] MAIN BEARING SET (STANDARD)  
  5I-7784 A [7] MAIN BEARING SET (0.25mm US)  
  5I-7785 A [7] MAIN BEARING SET (0.50mm US)  
  5I-7786 A [7] MAIN BEARING SET (0.75mm US)  
27. 5I-7654 [3] PLATE (STANDARD)  
  5I-7787 A [3] PLATE (0.15mm O S)  
  5I-7788 A [3] PLATE (0.30mm O S)  
  5I-7789 A [3] PLATE (0.45mm O S)  
28. 5I-8005 [1] SWITCH  
29. 4D-7794 [1] CLIP  
30. 7X-2536 [1] BOLT  
31. 095-8638 [1] WASHER  
32. 5I-7636 [1] EYE  
33. 5I-7603 [1] EYE  
34. 5I-7978 [1] SHEET  
  A   NOT PARTS OF THIS GROUP
 

#XEBP72490011
 

5I-7970: CYLINDER BLOCK GP

5I7970 CYLINDER BLOCK GP
An Attachment
h36275e XEBP7249
5I7970 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7955 [1] CRANKCASE AS  
2. 5I-7529 [1] BUSHING  
3. 5I-7528 [2] BUSHING  
4. 5I-8009 [1] BUSHING  
5. 5I-7672 [1] SHAFT AS  
6. 095-0879 [1] PIN  
7. 5I-7523 [6] SLEEVE (UN-FINISHED PARTS)  
8. 4I-9664 [2] PIN  
9. 099-4420 [2] PIN  
10. 095-2011 [1] CAP  
11. 5I-7505 [9] PLUG  
12. 3P-1896 [6] PLUG  
13. 5I-7525 [1] PLUG  
14. 5I-7524 [2] SEAL  
15. 094-7115 [14] BOLT  
16. 5I-7652 [1] BEARING CAP SET (UN-FINISHED PARTS)  
17. 6V-8236 [6] PIN  
18. 5I-7724 [2] PIN  
19. 096-3741 [5] CAP  
20. 5I-7526 [12] VALVE  
21. 8T-4191 [1] BOLT  
22. 095-2039 [1] WASHER  
23. 095-2005 [2] CAP  
24. 096-2501 [3] WASHER  
25. 8T-4179 [3] BOLT  
26. 5I-7588 [7] MAIN BEARING SET (STANDARD)  
  5I-7784 A [7] MAIN BEARING SET (0.25mm US)  
  5I-7785 A [7] MAIN BEARING SET (0.50mm US)  
  5I-7786 A [7] MAIN BEARING SET (0.75mm US)  
27. 5I-7654 [3] PLATE (STANDARD)  
  5I-7787 A [3] PLATE (0.15mm O S)  
  5I-7788 A [3] PLATE (0.30mm O S)  
  5I-7789 A [3] PLATE (0.45mm O S)  
28. 5I-8005 [1] SWITCH  
29. 4D-7794 [1] CLIP  
30. 7X-2536 [1] BOLT  
31. 095-8638 [1] WASHER  
32. 5I-7636 [1] EYE  
33. 5I-7603 [1] EYE  
34. 5I-7978 [1] SHEET  
  A   NOT PARTS OF THIS GROUP
 

#XEBP72490012
 

5I-7753: COVER GP-VALVE MECHANISM

5I7753 COVER GP-VALVE MECHANISM
h41760e XEBP7249
5I7753 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7626 [6] NUT  
2. 094-7471 [6] GASKET  
3. 5I-7584 [1] CAP  
4. 5I-8001 [2] COVER  
5. 5I-8002 [2] GASKET  
6. 4P-6422 [1] FILM  
7. 4P-6445 [1] PLATE  
 

#XEBP72490013
 

125-3004: CRANKSHAFT GP

1253004 CRANKSHAFT GP
h36286e XEBP7249
1253004 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-3005 [1] CRANKSHAFT AS  
2. 130-7596 [1] NUT  
3. 085-9513 [2] PIN  
4. 094-4628 [2] KEY  
5. 5I-7674 [1] GEAR  
6. 5I-7669 [1] PULLEY AS  
7. 5I-7540 [1] SLEEVE  
8. 5I-7541 [1] PLATE  
 

#XEBP72490014
 

5I-7972: CRANKSHAFT GP

5I7972 CRANKSHAFT GP
Engine S/N 7JK08058 - 19537
Part of 7I7758 Engine Ar listed on Page 13.01
An Attachment
h36291e XEBP7249
5I7972 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-3005 [1] CRANKSHAFT AS  
2. 130-7596 [1] NUT  
3. 085-9513 [2] PIN  
4. 094-4628 [2] KEY  
5. 5I-7674 [1] GEAR  
6. 5I-7959 [1] PULLEY AS  
7. 5I-7540 [1] SLEEVE  
8. 5I-7541 [1] PLATE  
 

#XEBP72490015
 

5I-7972: CRANKSHAFT GP

5I7972 CRANKSHAFT GP
Engine S/N 7JK19538-Up
Part of 7I7758 Engine Ar listed on Page 13.03
An Attachment
h36292e XEBP7249
5I7972 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-3005 [1] CRANKSHAFT AS  
2. 130-7596 [1] NUT  
3. 085-9513 [2] PIN  
4. 094-4628 [2] KEY  
5. 5I-7674 [1] GEAR  
6. 125-2992 [1] PULLEY AS  
7. 5I-7540 [1] SLEEVE  
8. 5I-7541 [1] PLATE  
 

#XEBP72490016
 

5I-7755: CAMSHAFT GP

5I7755 CAMSHAFT GP
h45530e XEBP7249
5I7755 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4200 [2] BOLT (L = 16 mm)  
2. 095-8638 [2] WASHER  
3. 5I-7650 [1] PLATE  
4. 094-4628 [1] KEY  
5. 5I-8068 [1] CAMSHAFT  
6. 5I-7627 [12] TAPPET  
7. 5I-7723 [12] PUSHROD  
 

#XEBP72490017
 

5I-7760: PISTON & ROD GP

5I7760 PISTON & ROD GP
h31106e XEBP7249
5I7760 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7538 [6] PISTON RING SET (STANDARD)  
  5I-7790 A [6] PISTON RING SET (0.25mm US)  
  5I-7791 A [6] PISTON RING SET (0.50mm US)  
2. 5I-7537 [6] PISTON (STANDARD)  
  5I-7792 A [6] PISTON (0.25mm US)  
  5I-7793 A [6] PISTON (0.50mm US)  
3. 094-7134 [6] PIN  
4. 5I-7667 [12] RING  
5. 5I-7668 [6] CONNECTING ROD AS  
6. 5I-7539 [1] BUSHING  
7. 094-7154 [2] BOLT  
8. 094-7516 [2] NUT  
9. 5I-7637 [12] BEARING (AVAILABLE IN SET WITH PAIR)  
  5I-7794 A [12] BEARING (0.25mm US)  
  5I-7795 A [12] BEARING (0.50mm US)  
  5I-7796 A [12] BEARING (0.75mm US)  
  A   NOT PARTS OF THIS GROUP
 

#XEBP72490018
 

5I-7757: HOUSING GP-FRONT

5I7757 HOUSING GP-FRONT
h45531e XEBP7249
5I7757 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7596 [1] BODY AS  
2. 125-2951 [1] GEAR  
3. 125-2950 [1] GEAR AS  
4. 8T-4177 [2] BOLT (L = 90 mm)  
5. 6F-7556 [2] COVER  
6. 5I-7559 [1] VALVE AS  
7. 2Y-5872 [1] GASKET  
8. 5I-7656 [1] SEAL  
9. 5I-7632 [1] PIPE  
10. 8T-4200 [2] BOLT (L = 16 mm)  
11. 8T-4189 [4] BOLT (L = 20 mm)  
12. 8T-6870 [4] BOLT (L = 70 mm)  
13. 095-8638 [13] WASHER  
14. 8T-6466 [1] BOLT (L = 60 mm)  
15. 8T-5005 [4] BOLT (L = 70 mm)  
16. 8T-4172 [2] BOLT (L = 80 mm)  
17. 7X-0796 [18] LOCKWASHER  
18. 8T-4137 [2] BOLT (L = 20 mm)  
19. 5I-7658 [1] GASKET  
20. 6F-7557 [2] GASKET  
21. 8T-6685 [4] BOLT (L = 110 mm)  
22. 5I-4969 [2] BOLT  
23. 6V-8231 [2] NUT  
24. 5I-7533 [1] POINTER  
25. 6V-8236 [1] PIN  
26. 5I-7657 [1] GASKET  
27. 5I-7659 [1] PLATE  
28. 096-9435 [1] PLUG  
29. 096-9532 [1] WASHER  
30. 8T-4195 [3] BOLT (L = 30 mm)  
31. 5I-7534 [1] GASKET  
32. 5I-7685 [1] COVER AS  
33. 5I-7684 [1] GASKET  
34. 5I-7686 [1] GEAR AS  
35. 5I-7683 [1] SPINDLE  
36. 5I-7610 [1] BOLT  
37. 7X-2536 [1] BOLT (L = 14 mm)  
38. 5I-7558 [1] GEAR AS  
 

#XEBP72490019
 

5I-7971: HOUSING GP-FRONT

5I7971 HOUSING GP-FRONT
Engine S/N 7JK08058 - 19537
Part of 7I7758 Engine Ar listed on Page 13.01
An Attachment
h36277e XEBP7249
5I7971 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 320-A N EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7596 [1] BODY AS  
2. 125-2951 [1] GEAR  
3. 125-2950 [1] GEAR AS  
4. 8T-4177 [2] BOLT (90mm LONG)  
5. 6F-7556 [2] COVER  
6. 5I-7559 [1] VALVE AS  
7. 2Y-5872 [1] GASKET  
8. 5I-7656 [1] SEAL  
9. 5I-7632 [1] PIPE  
10. 8T-4200 [2] BOLT (16mm LONG)  
11. 8T-4189 [4] BOLT (20mm LONG)  
12. 8T-6870 [4] BOLT (70mm LONG)  
13. 3B-4505 [13] LOCKWASHER  
14. 8T-6466 [1] BOLT (60mm LONG)  
15. 8T-5005 [1] BOLT (70mm LONG)  
16. 8T-4172 [2] BOLT (80mm LONG)  
17. 7X-0796 [18] LOCKWASHER  
18. 8T-4137 [2] BOLT (20mm LONG)  
19. 5I-7658 [1] GASKET  
20. 6F-7557 [2] GASKET  
21. 8T-6685 [4] BOLT (110mm LONG)  
22. 5I-4969 [2] BOLT  
23. 6V-8231 [5] NUT  
24. 5I-7958 [1] POINTER  
25. 6V-8236 [1] PIN  
26. 5I-7657 [1] GASKET  
27. 5I-7659 [1] PLATE  
28. 096-9435 [1] PLUG  
29. 096-9532 [1] WASHER  
30. 8T-4195 [3] BOLT (30mm LONG)  
31. 5I-7534 [1] GASKET  
32. 5I-7685 [1] COVER AS  
33. 5I-7684 [1] GASKET  
34. 5I-7686 [1] GEAR AS  
35. 5I-7683 [1] SPINDLE  
36. 5I-7610 [1] BOLT  
37. 5I-7956 [3] STUD  
38. 5I-7957 [3] SPACER  
39. 7X-2536 [1] BOLT (14mm LONG)  
40. 5I-7558 [1] GEAR AS  
 

Information:

Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Main Bearing Journal
3064 and 3066 Engines for Caterpillar Built Machines
Cylinder Block
3064 and 3066 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3064 and 3066 Engines for Caterpillar Built Machines
Cylinder Block - Inspect
3064 and 3066 Engines for Caterpillar Built Machines
Main Bearings - Inspect
3064 and 3066 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
3064 and 3066 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3064 and 3066 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3064 and 3066 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
3064 and 3066 Engines for Caterpillar Built Machines
Cylinder Liner - Install
3064 and 3066 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
3064 and 3066 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
3064 and 3066 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 320-A N :

VALVE MECHANISM GP
5I-7752 VALVE MECHANISM GP
CYLINDER HEAD GP
5I-7751 CYLINDER HEAD GP
7I-7758 ENGINE AR
7I-7758 ENGINE AR
7I-7758 ENGINE AR
7I-7758 ENGINE AR
7I-7674 ENGINE AR
7I-7674 ENGINE AR
CYLINDER BLOCK GP
5I-7970 CYLINDER BLOCK GP
COVER GP-VALVE MECHANISM
5I-7753 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
125-3004 CRANKSHAFT GP
CRANKSHAFT GP
5I-7972 CRANKSHAFT GP
CRANKSHAFT GP
5I-7972 CRANKSHAFT GP
CAMSHAFT GP
5I-7755 CAMSHAFT GP
PISTON & ROD GP
5I-7760 PISTON & ROD GP
HOUSING GP-FRONT
5I-7757 HOUSING GP-FRONT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.