AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1020831 TANK & MTG GP-HYDRAULIC S/N 2PM00459-Up 1140728-Page 126.01 307-A EXCAVATOR


HYDRAULIC SYSTEM
TANK GP
FILTER GP
PUMP GP

EXCAVATOR 307-A EXCAVATOR 2PM
 307 TRACK-TYPE EXCAVATOR 2PM00257-UP (MACHINE) POWERED BY 4D32 ENGINE XEBP7254 307-A 2PM   (1994)

HYDRAULIC SYSTEM

TANK GP
TANK & MTG GP-HYDRAULIC
102-0831 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
102-0831 TANK & MTG GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
114-0497 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
114-0728 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
114-0728 TANK & FILTER GP-HYDRAULIC
 

#XEBP72540170
 

102-0831: TANK & MTG GP-HYDRAULIC

1020831 TANK & MTG GP-HYDRAULIC
S/N 2PM00459-Up
1140728-Page 126.01
h39808e XEBP7254
1020831 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-0728 Y [1] TANK GP  
2. 087-8737 B [4] SHIM (2.0mm THICK)  
  087-8738 B [4] SHIM (1.0mm THICK)  
  087-8740 B [4] SHIM (0.4mm THICK)  
3. 109-1998 [4] SPACER  
4. 7X-2555 [4] BOLT (80mm LONG)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP72540171
 

114-0497: TANK & FILTER GP-HYDRAULIC

1140497 TANK & FILTER GP-HYDRAULIC
Capacity 85 Liters
S/N 2PM00257-00458
Part of 1020831 Tank & MTG listed on Page 125
1057419-Page 127
h31989e XEBP7254
1140497 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-2770 [1] CLIP  
2. 105-7419 Y [1] SCREEN GP  
3. 095-1725 [1] SEAL  
4. 103-8238 [1] COVER AS  
  4I-3743 [1] FILLER AS  
5. 4I-3745 [1] CAP  
6. 093-5369 [1] ELEMENT  
7. 093-5570 [1] VALVE AS  
8. 095-6804 [1] SPRING  
9. 095-1723 [1] SEAL  
10. 103-8240 [1] COVER  
11. 105-7420 [1] HOSE  
12. 7Y-5282 [1] CLAMP  
13. 8T-4137 [12] BOLT (20mm LONG)  
14. 8T-4121 [12] WASHER  
15. 8T-4133 [1] NUT  
16. 9J-7031 [1] PLUG  
17. 5M-2057 [1] SEAL  
18. 096-4643 [1] SENDER  
19. [1] TANK AS  
20. 1U-2827 [1] GUIDE  
21. 8J-8783 [1] VALVE  
22. 094-3245 [1] GAUGE AS  
23. 096-4754 [1] PIPE  
24. 095-1514 [4] SEAL  
25. 7Y-4754 [2] BLOCK  
26. 094-3247 [2] BOLT  
27. 095-1517 [4] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72540172
 

114-0728: TANK & FILTER GP-HYDRAULIC

1140728 TANK & FILTER GP-HYDRAULIC
Capacity 85 Liters
S/N 2PM00459-(D98.03)
Part of 1020831 Tank & MTG listed on Page 125
1057419-Page 127
h39894e XEBP7254
1140728 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9299 [1] CLIP  
2. 105-7419 Y [1] SCREEN GP  
3. 095-1725 [1] SEAL  
4. 103-8238 [1] COVER AS  
  4I-3743 [1] FILLER AS  
5. 4I-3745 [1] CAP  
6. 093-5369 [1] ELEMENT  
7. 093-5570 [1] VALVE AS  
8. 095-6804 [1] SPRING  
9. 095-1723 [1] SEAL  
10. 103-8240 [1] COVER  
11. 105-7420 [1] HOSE  
12. 7Y-5282 [1] CLAMP  
13. 8T-4137 [12] BOLT (20mm LONG)  
14. 8T-4121 [13] WASHER  
15. 8T-4133 [1] NUT  
16. 9J-7031 [1] PLUG  
17. 5M-2057 [1] SEAL  
18. 096-4643 [1] SENDER  
19. 094-3245 [1] GAUGE AS  
20. 096-4754 [1] PIPE  
21. 095-1514 [4] SEAL  
22. 7Y-4754 [2] BLOCK  
23. 094-3247 [2] BOLT  
24. 095-1517 [4] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#XEBP72540173
 

114-0728: TANK & FILTER GP-HYDRAULIC

1140728 TANK & FILTER GP-HYDRAULIC
Capacity 85 Liters
S/N 2PM(D98.04-)
Part of 1020831 Tank & MTG listed on Page 125
1057419-Page 127
h49699e XEBP7254
1140728 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-2057 [1] SEAL  
2. 105-7419 Y [1] SCREEN GP  
3. 095-1725 [1] SEAL  
4. 103-8238 [1] COVER AS  
  4I-3743 [1] FILLER AS  
5. 4I-3745 [1] CAP  
6. 093-5369 [1] ELEMENT  
7. 093-5570 [1] VALVE AS  
8. 095-6804 [1] SPRING  
9. 095-1723 [1] SEAL  
10. 103-8240 [1] COVER  
11. 105-7420 [1] HOSE  
12. 7Y-5282 [1] CLAMP  
13. 8T-4137 [12] BOLT (20mm LONG)  
14. 8T-4121 [12] WASHER  
15. 096-4643 [1] SENDER  
16. 9J-7031 [1] PLUG  
17. 1U-2827 [1] GUIDE-VALVE  
18. 8J-8783 [1] VALVE  
19. 094-3245 [1] GAUGE AS  
20. 096-4754 [1] PIPE  
21. 095-1514 [4] SEAL  
22. 7Y-4754 [2] BLOCK  
23. 094-3247 [2] BOLT  
24. 095-1517 [4] SEAL  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP72540174
 

105-7419: SCREEN GP

1057419 SCREEN GP
Part of 1140497 and 1140728 Tank & Filter listed on Pages 126 and 126.01
h31990e XEBP7254
1057419 SCREEN GP Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-6641 [1] GUIDE  
2. 095-6639 [1] SPRING  
3. 103-8251 [1] ROD  
4. 8T-4133 [2] NUT  
5. 099-6875 [1] SCREEN AS  
6. 099-4780 [1] SEAL  
 

#XEBP72540175
 

102-3746: PUMP & MOUNTING GP

1023746 PUMP & MOUNTING GP
S/N 2PM00257-00498
1020781-Page 128, 1023747-Page 135
h31996e XEBP7254
1023746 PUMP & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-0781 [1] PUMP GP  
2. 8T-7338 [4] BOLT (45mm LONG)  
3. 9X-8257 [4] WASHER  
4. 102-3747 [1] COUPLING GP  
5. 8T-4136 [12] BOLT (25mm LONG)  
6. 8T-4121 [12] WASHER  
7. 5I-9379 [1] COVER  
 

#XEBP72540176
 

136-0345: PUMP & MOUNTING GP

1360345 PUMP & MOUNTING GP
S/N 2PM00499-Up
1360335-Page 129.01, 1023747-Page 135
h44510e XEBP7254
1360345 PUMP & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-0335 [1] PUMP GP  
2. 8T-7338 [4] BOLT (45mm LONG)  
3. 9X-8257 [4] WASHER  
4. 102-3747 [1] COUPLING GP  
5. 8T-4136 [12] BOLT (25mm LONG)  
6. 8T-4121 [12] WASHER  
7. 5I-9379 [1] COVER  
 

#XEBP72540177
 

102-0781: PUMP GP-DOUBLE PISTON

1020781 PUMP GP-DOUBLE PISTON
Slipper
S/N 2PM00257-00498
Part of 1023746 Pump & Mounting listed on Page 127
1076916-Page 133
h39896e XEBP7254
1020781 PUMP GP-DOUBLE PISTON Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-6916 Y [1] PUMP GP  
2. 095-1579 [2] SEAL  
3. 085-5564 [1] PLUG  
4. 107-6885 [1] SPOOL  
5. 107-6886 [1] SPRING  
6. 107-6901 [8] SPRING  
7. 118-4058 [2] SEAT  
8. 107-6906 B [2] SHIM (1.1mm THICK)  
  107-6907 B [2] SHIM (1.2mm THICK)  
  107-6908 B [2] SHIM (1.3mm THICK)  
9. 8T-4224 [4] WASHER  
10. 9X-8256 [4] WASHER  
11. 107-6881 [1] COVER  
12. 107-6882 [1] PLATE  
13. 095-9805 [3] BOLT (40mm LONG)  
14. 2Y-5578 [2] PIN  
15. 099-5845 [2] PLUG  
16. 111-5154 [2] BOLT  
17. 9T-3940 [7] PLUG  
18. 5A-3604 [4] BOLT (25mm LONG)  
19. 107-6663 [1] COVER  
20. 6V-7659 [1] SEAL  
21. 107-6664 [1] COLLAR  
22. 111-2414 [2] BEARING  
23. 107-6662 [1] SWASHPLATE  
24. 111-9964 [1] SHAFT  
25. 107-6661 [1] SEAL  
26. 107-6659 [1] CASE  
27. 2W-1145 [1] RING  
28. 8T-9597 [2] RING  
29. 7R-8872 [1] SEAL  
30. 111-3239 [1] BEARING  
31. 107-6657 [1] HOUSING  
32. 085-5584 [1] PLUG  
33. 107-6884 [1] PACKING  
34. 111-2412 [1] BEARING  
35. 107-6892 [1] SPRING  
36. 107-6891 [1] SPRING  
37. 7X-2908 [1] RING  
38. 107-6888 [1] SEAT  
39. 107-6893 B [1] SHIM (0.3mm THICK)  
  107-6894 B [1] SHIM (0.5mm THICK)  
  3C-7095 B [1] SHIM (1.0mm THICK)  
40. 107-6898 [2] PISTON  
41. 107-6899 [1] PISTON  
42. 6V-7657 [1] SEAL  
43. 107-6889 [1] COVER  
44. 8T-4131 [1] NUT  
45. 107-6890 [1] SETSCREW  
46. 6V-8653 [4] BOLT  
47. 107-6909 [1] PLATE  
48. 111-2415 [2] BEARING  
49. 095-1574 [4] SEAL  
50. 107-6879 [1] SPRING  
51. 107-6667 [1] BARREL  
52. 107-6877 [1] PLATE  
53. 107-6668 [1] RETAINER  
54. 107-6878 [1] GUIDE  
55. 099-3065 [3] PIN  
56. 107-6880 [2] SEAT  
57. 107-6666 [1] PISTON AS  
58. 107-6887 [1] SEAT  
59. 107-6896 [1] CYLINDER  
60. 107-6905 [1] ORIFICE  
61. 095-1584 [3] SEAL  
62. 107-6897 [2] PISTON  
63. 095-1597 [2] SEAL  
64. 107-6903 [2] RING  
65. 107-6904 [2] RING  
66. 118-4059 [2] PLUG  
67. 9X-6032 [4] BOLT (30mm LONG)  
68. 118-4060 [2] NUT  
69. 118-4061 [2] SCREW  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP72540178
 

136-0335: PUMP GP-DOUBLE PISTON

1360335 PUMP GP-DOUBLE PISTON
Slipper
S/N 2PM00499-Up
Part of 1360345 Pump & Mounting listed on Page 127.01
1360336-Page 133.01
h44512e XEBP7254
1360335 PUMP GP-DOUBLE PISTON Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-0336 Y [1] PUMP GP  
2. 095-1579 [2] SEAL  
3. 085-5564 [1] PLUG  
4. 132-7614 [1] SPOOL  
5. 107-6886 [1] SPRING  
6. 107-6901 [8] SPRING  
7. 118-4058 [2] SEAT  
8. 107-6906 B [2] SHIM (1.1mm THICK)  
  107-6907 B [2] SHIM (1.2mm THICK)  
  107-6908 B [2] SHIM (1.3mm THICK)  
9. 8T-4224 [4] WASHER  
10. 9X-8256 [4] WASHER  
11. 107-6881 [1] COVER  
12. 107-6882 [1] PLATE  
13. 095-9805 [3] BOLT (40mm LONG)  
14. 2Y-5578 [2] PIN  
15. 099-5845 [2] PLUG  
16. 111-5154 [2] BOLT  
17. 9T-3940 [7] PLUG  
18. 5A-3604 [4] BOLT (25mm LONG)  
19. 107-6663 [1] COVER  
20. 6V-7659 [1] SEAL  
21. 107-6664 [1] COLLAR  
22. 111-2414 [2] BEARING  
23. 107-6662 [1] SWASHPLATE  
24. 111-9964 [1] SHAFT  
25. 107-6661 [1] SEAL  
26. 107-6659 [1] CASE  
27. 2W-1145 [1] RING  
28. 8T-9597 [2] RING  
29. 7R-8872 [1] SEAL  
30. 111-3239 [1] BEARING  
31. 107-6657 [1] HOUSING  
32. 085-5584 [1] PLUG  
33. 107-6884 [1] PACKING  
34. 111-2412 [1] BEARING  
35. 107-6892 [1] SPRING  
36. 107-6891 [1] SPRING  
37. 7X-2908 [1] RING  
38. 107-6888 [1] SEAT  
39. 107-6893 B [1] SHIM (0.3mm THICK)  
  107-6894 B [1] SHIM (0.5mm THICK)  
  3C-7095 B [1] SHIM (1.0mm THICK)  
40. 107-6898 [2] PISTON  
41. 107-6899 [1] PISTON  
42. 6V-7657 [1] SEAL  
43. 107-6889 [1] COVER  
44. 8T-4131 [1] NUT  
45. 107-6890 [1] SETSCREW  
46. 6V-8653 [4] BOLT  
47. 107-6909 [1] PLATE  
48. 111-2415 [2] BEARING  
49. 095-1574 [4] SEAL  
50. 107-6879 [1] SPRING  
51. 107-6667 [1] BARREL  
52. 107-6877 [1] PLATE  
53. 107-6668 [1] RETAINER  
54. 107-6878 [1] GUIDE  
55. 099-3065 [3] PIN  
56. 107-6880 [2] SEAT  
57. 107-6666 [1] PISTON AS  
58. 107-6887 [1] SEAT  
59. 107-6896 [1] CYLINDER  
60. 107-6905 [1] ORIFICE  
61. 095-1584 [3] SEAL  
62. 107-6897 [2] PISTON  
63. 095-1597 [2] SEAL  
64. 107-6903 [2] RING  
65. 107-6904 [2] RING  
66. 118-4059 [2] PLUG  
67. 9X-6032 [4] BOLT (30mm LONG)  
68. 118-4060 [2] NUT  
69. 118-4061 [2] SCREW  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP72540179
 

102-0783: PUMP GP-DOUBLE PISTON

1020783 PUMP GP-DOUBLE PISTON
Slipper
S/N 2PM00257-00498
Part of 1251612 and 1251614 Blade Ar listed on Pages 277.01 and 277.04
1119971-Page 132
An Attachment
h39916e XEBP7254
1020783 PUMP GP-DOUBLE PISTON Parts scheme
  For full view, you need register

Parts for your 307-A EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-9971 Y [1] PUMP GP  
2. 095-1579 [2] SEAL  
3. 085-5564 [1] PLUG  
4. 107-6885 [1] SPOOL  
5. 107-6886 [1] SPRING  
6. 107-6901 [8] SPRING  
7. 118-4058 [2] SEAT  
8. 107-6906 B [2] SHIM (1.1mm THICK)  
  107-6907 B [2] SHIM (1.2mm THICK)  
  107-6908 B [2] SHIM (1.3mm THICK)  
9. 111-2415 [2] CUP  
10. 9X-8256 [4] WASHER  
11. 107-6881 [1] COVER  
12. 107-6882 [1] PLATE  
13. 095-9805 [3] BOLT (40mm LONG)  
14. 2Y-5578 [2] PIN  
15. 099-5845 [2] PLUG  
16. 111-5154 [2] BOLT  
17. 9T-3940 [7] PLUG  
18. 5A-3604 [4] BOLT (25mm LONG)  
19. 107-6663 [1] COVER  
20. 6V-7659 [1] SEAL  
21. 107-6664 [1] COLLAR  
22. 111-2414 [2] CONE  
23. 107-6662 [1] SWASHPLATE  
24. 111-9964 [1] SHAFT  
25. 107-6661 [1] SEAL  
26. 107-6659 [1] CASE  
27. 2W-1145 [1] RING  
28. 8T-9597 [2] RING  
29. 7R-8872 [1] SEAL  
30. 111-3239 [1] BEARING  
31. 107-6657 [1] HOUSING  
32. 085-5584 [1] PLUG  
33. 107-6884 [1] PACKING  
34. 111-2412 [1] BEARING  
35. 107-6892 [1] SPRING  
36. 107-6891 [1] SPRING  
37. 7X-2908 [1] RING  
38. 107-6888 [1] SEAT  
39. 107-6893 B [1] SHIM (0.3mm THICK)  
  107-6894 B [1] SHIM (0.5mm THICK)  
  3C-7095 B [1] SHIM (1.0mm THICK)  
40. 8T-4224 [4] WASHER  
41. 107-6899 [1] PISTON  
42. 6V-7657 [1] SEAL  
43. 107-6889 [1] COVER  
44. 8T-4131 [1] NUT  
45. 107-6890 [1] SETSCREW  
46. 6V-8653 [4] BOLT  
47. 107-6909 [1] PLATE  
48. 095-1574 [4] SEAL  
49. 107-6879 [1] SPRING  
50. 107-6667 [1] BARREL  
51. 107-6877 [1] PLATE  
52. 107-6668 [1] RETAINER  
53. 107-6878 [1] GUIDE  
54. 099-3065 [3] PIN  
55. 107-6880 [2] SEAT  
56. 107-6666 [1] PISTON AS  
57. 107-6887 [1] SEAT  
58. 107-6896 [1] CYLINDER  
59. 107-6905 [1] ORIFICE  
60. 095-1584 [3] SEAL  
61. 107-6897 [2] PISTON  
62. 095-1597 [2] SEAL  
63. 107-6903 [2] RING  
64. 107-6904 [2] RING  
65. 118-4059 [2] PLUG  
66. 9X-6032 [4] BOLT (30mm LONG)  
67. 107-6898 [2] PISTON  
68. 118-4060 [2] NUT  
69. 118-4061 [2] SCREW  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Oil Tank
307 EXCAVATOR MACHINE SYSTEMS
Service Magazine
Improved Sight Gauges for the Hydraulic Tank and for the Fuel Tank Have Increased Durability {1273, 5056, 7479}
2003/12/08
Cap Assemblies Eliminate Need to Drain Hydraulic Tank During System Service {0738}
2004/03/08
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Caterpillar Parts SIS Catalog 307-A :

TANK & MTG GP-HYDRAULIC
102-0831 TANK & MTG GP-HYDRAULIC
MOUNTING GP-GREASE GUN
4I-2680 MOUNTING GP-GREASE GUN
BOX GP-STORAGE
136-0394 BOX GP-STORAGE
BOX GP-STORAGE
102-5726 BOX GP-STORAGE
BOX & MOUNTING GP
136-0393 BOX & MOUNTING GP
BOX & MOUNTING GP
102-5614 BOX & MOUNTING GP
BOX & MOUNTING GP
127-3800 BOX & MOUNTING GP
LINK AS-TRACK
102-8077 LINK AS-TRACK
TANK & FILTER GP-HYDRAULIC
114-0497 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
114-0728 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
114-0728 TANK & FILTER GP-HYDRAULIC
SCREEN GP
105-7419 SCREEN GP
PUMP & MOUNTING GP
102-3746 PUMP & MOUNTING GP
PUMP & MOUNTING GP
136-0345 PUMP & MOUNTING GP
PUMP GP-DOUBLE PISTON
102-0781 PUMP GP-DOUBLE PISTON
PUMP GP-DOUBLE PISTON
136-0335 PUMP GP-DOUBLE PISTON
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.