AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I2834 FUEL INJECTION PUMP GROUP PART OF 2W0259-Page 77 4P9840-Page 83 1W6539-Page 84 4P9028-Page 85 D7G


FUEL SYSTEM
PUMP GP-FUEL INJECTION
CAMSHAFT AS
LINES GP-FUEL INJECTION
CONTROL GP-FUEL RATIO
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

TRACK-TYPE TRACTOR D7G TRACK-TYPE TRACTOR 65V
 D7G TRACTOR POWERSHIFT 65V07701-UP (MACHINE) POWERED BY 3306 ENGINE XEBP7311 D7G 65V   (1979)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
VANDALISM PROTECTION
9P-8894 VANDALISM PROTECTION
GOVERNOR AND FUEL INJECTION PUMP
2W-0259 GOVERNOR AND FUEL INJECTION PUMP
FUEL INJECTION PUMP GROUP
6I-2834 FUEL INJECTION PUMP GROUP
FUEL PUMP HOUSING
4P-9840 FUEL PUMP HOUSING
FUEL INJECTION PUMP
1W-6539 FUEL INJECTION PUMP
 

#XEBP73110100
 

6I-2834: FUEL INJECTION PUMP GROUP

6I2834 FUEL INJECTION PUMP GROUP
PART OF 2W0259-Page 77
4P9840-Page 83 1W6539-Page 84 4P9028-Page 85
j056516 XEBP7311
6I2834 FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL  
2. 1W-3286 [1] RACK  
3. 4P-9840 Y [1] HOUSING ASSEM.  
4. 1W-6539 Y [6] PUMP GROUP  
5. 8N-5117 [6] BUSHING  
6. 114-8718 [6] SEAL  
7. 4W-6869 [6] SPACER  
8. 4P-9028 Y [1] CAMSHAFT ASSEM.  
9. 7N-8421 [1] RING  
10. 8N-2487 [1] WASHER  
11. 7N-1047 [1] COVER  
  7N-1046 [1] GASKET  
12. 0S-1615 [4] BOLT (1/4)  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP73110101
 

4P-9840: FUEL PUMP HOUSING

FUEL PUMP HOUSING (4P9840 N/S)
PART OF 6I2834-Page 82
j047928 XEBP7311
4P9840 FUEL PUMP HOUSING Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9828 [1] BEARING  
2. 1S-1953 [1] BEARING  
3. 6I-0979 [6] DOWEL  
4. 1W-3285 [1] BEARING  
5. 4P-8480 [6] PIN  
6. 7N-7970 [1] BEARING  
 

#XEBP73110102
 

1W-6539: FUEL INJECTION PUMP

FUEL INJECTION PUMP (1W6539 N/S)
PART OF 6I2834-Page 82
j037153 XEBP7311
1W6539 FUEL INJECTION PUMP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING  
2. 8N-1415 [1] SPRING  
3. 1W-9171 [1] BONNET  
4. 1W-6987 [1] VALVE ASSEM.  
5. 1W-6541 [1] PLUNGER & BARREL AS.  
6. 7N-1067 [1] SPRING  
7. 7N-1415 [1] WASHER  
 

#XEBP73110103
 

4P-9028: CAMSHAFT

CAMSHAFT (4P9028 N/S)
PART OF 6I2834-Page 82
j048252 XEBP7311
4P9028 CAMSHAFT Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7264 [4] WEIGHT  
2. 9Y-7037 [4] BOLT (1/4)  
3. 1S-5440 [4] DOWEL  
4. 4N-9019 [1] DOWEL  
5. 7E-3986 [1] CARRIER  
6. 6I-2842 [1] CAMSHAFT  
7. 7L-3326 [1] BEARING  
8. 8N-2510 [1] SHAFT  
9. 7N-7166 [2] RACE  
 

#XEBP73110104
 

1W-3609: FUEL INJECTION LINES

FUEL INJECTION LINES (1W3609 N/S)
PART OF 1W0543-Page 5
j058087 XEBP7311
1W3609 FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-7005 [6] NOZZLE ASSEM.  
  9L-9098 [1] SEAL  
  7W-4486 [1] WASHER  
  114-3364 [1] WASHER  
  9X-2836 [1] SCREW (NO. 6)  
2. 4B-4274 [4] WASHER  
3. 4P-2578 [1] BRACKET  
4. 4P-9386 [1] LINE ASSEM. (NO. 6)  
5. 4P-9385 [1] LINE ASSEM. (NO. 5)  
6. 104-4254 [1] LINE ASSEM. (NO. 4)  
7. 104-4253 [1] LINE ASSEM. (NO. 3)  
8. 4P-9382 [1] LINE ASSEM. (NO. 2)  
9. 4P-9381 [1] LINE ASSEM. (NO. 1)  
10. 3S-2713 [3] NUT (3/8)  
11. 2H-3934 [1] SEAL  
12. 6V-6921 [1] SEAL  
13. 5F-7054 [1] SEAL  
14. 0S-1590 [2] BOLT (3/8)  
15. 2H-3932 [1] SEAL  
16. 1W-9169 [12] CLAMP  
17. 1T-0416 [6] BOLT (5/16)  
18. 8N-5132 [6] CLAMP  
19. 122-9405 [1] BRACKET ASSEM.  
20. 9N-3388 [5] SCREW  
21. 8T-9379 [1] BOLT (3/8)  
22. 5M-2894 [5] WASHER  
23. 5P-4939 [8] SCREW (NO. 10)  
24. 7C-7614 [1] BRACKET ASSEM.  
25. 0S-1591 [1] BOLT (3/8)  
26. 1W-9168 [11] CLAMP  
27. 1W-9167 [3] CLAMP ASSEM.  
28. 8H-9204 [6] WASHER  
29. 0S-0509 [1] BOLT (3/8)  
  5P-1075 [1] WASHER  
30. 9Y-7524 [1] PLATE  
 

#XEBP73110105
 

7W-2830: FUEL RATIO CONTROL GROUP

7W2830 FUEL RATIO CONTROL GROUP
PART OF 4W1339-Page 78
j102166 XEBP7311
7W2830 FUEL RATIO CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8748 [1] NUT  
2. 4W-0924 [1] RETAINER  
3. 7W-2826 [1] SPRING  
4. 4P-7274 [1] COVER  
5. 4P-7275 [1] COVER  
6. 106-6493 [1] WASHER  
7. 7N-9062 [1] HOUSING  
8. 8N-5763 [1] SEAL  
9. 8N-5764 [1] PISTON  
10. 2W-9315 [2] WASHER  
11. 8F-4610 [1] RING  
12. 2A-5546 [2] BOLT  
13. 5P-0537 [4] WASHER  
14. 5P-6945 [2] BOLT  
15. 2W-9316 [1] VALVE ASSEM.  
16. 7N-9036 [1] VALVE  
17. 8N-5765 [1] SPRING  
18. 7N-9035 [1] RETAINER  
19. 7W-2015 [1] EXTENSION (VALVE)  
20. 7W-2827 [1] SPRING  
21. 9N-1754 [1] SPRING  
22. 6I-1564 [1] DIAPHRAGM  
23. 3E-6760 [1] SEAL  
24. 5P-8210 [1] SEAL  
25. 115-3358 [1] WASHER  
 

#XEBP73110106
 

7S-3622: ELECTRIC STARTING MOTOR

ELECTRIC STARTING MOTOR (7S3622 N/S)
EFFECTIVE WITH SERIAL NO. 65V7700-65V7889
PART OF 1W2527-Page 3
4N3181-Page 90
j044440 XEBP7311
7S3622 ELECTRIC STARTING MOTOR Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-8902 [3] BOLT (5/8)  
2. 8D-5054 [3] WASHER  
3. 4H-7869 [1] 4N1059  
4. 4N-3181 Y [1] MOTOR GROUP  
5. 3N-0539 [1] WIRE ASSEM.  
  2L-8052 [1] TERMINAL  
  2L-8054 [1] TERMINAL  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP73110107
 

7S-3622: ELECTRIC STARTING MOTOR

ELECTRIC STARTING MOTOR (7S3622 N/S)
EFFECTIVE WITH SERIAL NO. 65V7890-
PART OF 1W2527-Page 3
6V5227-Page 90
j055105 XEBP7311
7S3622 ELECTRIC STARTING MOTOR Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-8902 [3] BOLT (5/8)  
2. 7X-0591 [3] WASHER  
3. 4N-1059 [1] GASKET  
4. 6V-5227 Y [1] MOTOR GROUP  
5. 3N-0539 [1] WIRE ASSEM.  
  2L-8052 [1] TERMINAL  
  2L-8054 [1] TERMINAL  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP73110108
 

8S-3886: ELECTRIC STARTING MOTOR

ELECTRIC STARTING MOTOR (8S3886 N/S)
EFFECTIVE WITH SERIAL NO. 65V07700-65V07889
3T8946-Page 91~93
AN ATTACHMENT
j041255 XEBP7311
8S3886 ELECTRIC STARTING MOTOR Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-8902 [3] BOLT (5/8)  
2. 7X-0591 [3] WASHER  
3. 4N-1059 [1] GASKET  
4. 3T-8946 Y [1] MOTOR GROUP  
5. 9F-4337 [1] WIRE ASSEM.  
  2L-8052 [1] TERMINAL  
  2L-8054 [1] TERMINAL  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP73110109
 

8S-3886: ELECTRIC STARTING MOTOR

ELECTRIC STARTING MOTOR (8S3886 N/S)
EFFECTIVE WITH SERIAL NO. 65V07890-
6V0512-Page 102, 103
AN ATTACHMENT
j060140 XEBP7311
8S3886 ELECTRIC STARTING MOTOR Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-8902 [3] BOLT (5/8)  
2. 7X-0591 [3] WASHER  
3. 4N-1059 [1] GASKET  
4. 6V-0512 CY [1] MOTOR GROUP  
5. 9F-4337 [1] WIRE ASSEM.  
  2L-8052 [1] TERMINAL  
  2L-8054 [1] TERMINAL  
  C   INDICATES CHANGE
  Y   SEE SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Fuel Injection <BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Fuel Injection Pump Housing<BR> (Scroll Fuel System - DI)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Fuel Injection
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Fuel Injection Pump
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Fuel Injection Pump Housing
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Automatic Timing Advance
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Fuel Injection Nozzle
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Fuel Injection Valves
3306 VEHICULAR ENGINE FOR D7G TRACTOR
Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE FOR D7G TRACTOR
Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE FOR D7G TRACTOR
Governor
3306 VEHICULAR ENGINE FOR D7G TRACTOR
Fuel Injection Pumps
3306 VEHICULAR ENGINE FOR D7G TRACTOR
Fuel Injection Pump Housing
3306 VEHICULAR ENGINE FOR D7G TRACTOR
Fuel Injection Pump Drive Gear
3306 VEHICULAR ENGINE FOR D7G TRACTOR
Fuel Injection Nozzles - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Rod End Improves Operation Of Governor Control{1265,1276,1269,1264}
1981/04/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improvements To Governor Control Linkage{1265,1276}
1977/11/14
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Improvements To The Governor And Decelerator Linkage{1265,1276}
1979/03/05
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Method To Prevent High Fuel Pressure In The Injection Pump Housing{1262}
1979/06/18
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Machine Engines {1251, 1290}
2012/07/09
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17
Cat&reg; Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Machine Engines {1251, 1278}
2014/09/04

Caterpillar Parts SIS Catalog D7G :

GOVERNOR GROUP
2W-2410 GOVERNOR GROUP
GOVERNOR GROUP
2W-2410 GOVERNOR GROUP
GOVERNOR GROUP
2W-2410 GOVERNOR GROUP
FUEL RATIO CONTROL
4W-1339 FUEL RATIO CONTROL
TORQUE CONTROL
1W-1597 TORQUE CONTROL
GOVERNOR AND FUEL INJECTION PUMP
2W-0259 GOVERNOR AND FUEL INJECTION PUMP
FUEL TRANSFER PUMP GROUP
1W-1695 FUEL TRANSFER PUMP GROUP
FUEL TRANSFER PUMP AND MOUNTING
2W-4160 FUEL TRANSFER PUMP AND MOUNTING
FUEL PUMP HOUSING
4P-9840 FUEL PUMP HOUSING
FUEL INJECTION PUMP
1W-6539 FUEL INJECTION PUMP
CAMSHAFT
4P-9028 CAMSHAFT
FUEL INJECTION LINES
1W-3609 FUEL INJECTION LINES
FUEL RATIO CONTROL GROUP
7W-2830 FUEL RATIO CONTROL GROUP
ELECTRIC STARTING MOTOR
7S-3622 ELECTRIC STARTING MOTOR
ELECTRIC STARTING MOTOR
7S-3622 ELECTRIC STARTING MOTOR
ELECTRIC STARTING MOTOR
8S-3886 ELECTRIC STARTING MOTOR

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.