7C3574 ENGINE ARRANGEMENT-Part 1 of 2 918F WHEEL LOADER

Part No	Qty	Parts name
4W-3724 Y	[1]	CYLINDER BLOCK GROUP
1W-8897 Y	[1]	CYLINDER BLOCK COVER GROUP
4W-3579 Y	[1]	CRANKSHAFT GROUP
7E-7590 Y	[1]	CRANKSHAFT SEAL GROUP
7E-3429 Y	[4]	CONNECTING ROD AND PISTON GROUP
4W-4865 Y	[1]	CAMSHAFT(SINGLE)
7E-3686 Y	[1]	BALANCER GROUP
7E-4211 Y	[1]	CYLINDER HEAD GROUP
4W-4866 Y	[1]	VALVE MECHANISM GROUP
7W-7337 Y	[1]	VALVE MECHANISM COVER GROUP
4W-2515 Y	[1]	ENGINE LIFTING GROUP
7L-0002 Y	[1]	FRONT HOUSING GROUP
7E-3756 Y	[1]	FRONT GEAR GROUP
9Y-4914 Y	[1]	CRANKSHAFT PULLEY
7W-9847 Y	[1]	FRONT COVER GROUP
7E-8774 Y	[1]	FLYWHEEL HOUSING GROUP
9Y-9511 Y	[1]	FLYWHEEL GROUP
4W-3462 Y	[1]	CARRIER(SEAL)
7C-1770 Y	[1]	FLYWHEEL HOUSING SEAL GROUP
7C-5402 Y	[1]	OIL PAN GROUP
9Y-0325 Y	[1]	OIL LEVEL GAUGE GROUP
7C-4532 Y	[1]	OIL PAN DRAIN GROUP
Y		SEPARATE ILLUSTRATION

#XEBP73140002

7C-3574: ENGINE AR

ENGINE AR

7C3574 ENGINE ARRANGEMENT-Part 2 of 2

XEBP73140002 XEBP7314

For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7C-0896 Y	[1]	ENGINE OIL FILTER GROUP
7C-5873 Y	[1]	ENGINE OIL LINES GROUP
1N-3477 Y	[1]	BREATHER GROUP
7E-2971 Y	[1]	ENGINE OIL PUMP GROUP
7W-8420 Y	[1]	FUME DISPOSAL GROUP
7W-8798 Y	[1]	ENGINE OIL FILLER GROUP
2T-2951 Y	[1]	MANUAL VALVE GROUP(FLUID SAMPLING)
7C-6998 Y	[1]	WATER PUMP DRIVE GROUP
7C-7030 Y	[1]	WATER PUMP GROUP
7C-0044 Y	[1]	FAN DRIVE GROUP
4W-4869 Y	[1]	ENGINE OIL COOLER GROUP
7C-1567 Y	[1]	WATER LINES GROUP
4P-4879 Y	[1]	INLET MANIFOLD GROUP
4W-6609 Y	[1]	AIR LINES GROUP
1W-8898 Y	[1]	EXHAUST MANIFOLD GROUP
6I-0194 Y	[1]	TURBOCHARGER GROUP
4W-6615 Y	[1]	TURBOCHARGER OIL LINES GROUP
7C-2290 Y	[1]	INLET MANIFOLD COVER GROUP
7E-9711 Y	[4]	FUEL INJECTION PUMP GROUP
1N-3476 Y	[1]	FUEL FILER GROUP
7C-4028 Y	[1]	SHUT-OFF SOLENOID GROUP
7E-9912 Y	[1]	GOVERNOR CONTROL GROUP
7E-5867 Y	[1]	GOVERNOR(UNIT INJECTOR)
7W-8600 Y	[1]	FUEL INJECTION CONTROL GROUP
7W-9854 Y	[1]	FUEL FILTER LINES GROUP
4P-8424 Y	[1]	FUEL PRIMING PUMP AND PRIMARY FILTER GROUP
9Y-3943 Y	[1]	AIR FUEL RATIO CONTROL LINES GROUP
Y		SEPARATE ILLUSTRATION

#XEBP73140003

4W-3724: CYLINDER BLOCK GP

CYLINDER BLOCK GP

CYLINDER BLOCK (4W3724 N/S)
4Y6319-Page 11

j47716e XEBP7314

For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	Y	[1]	BLOCK GROUP
2.	1W-8407	[1]	SLEEVE
3.	6V-3538	[2]	DOWEL
4.	7N-5683	[2]	DOWEL
5.	6V-3940	[4]	BOLT (M8)
6.	4P-2457	[4]	TUBE ASSEM.
			SEE SEPARATE ILLUSTRATION

#XEBP73140004

4Y-6319: CYLINDER BLOCK

CYLINDER BLOCK

CYLINDER BLOCK (4Y6319 N/S)
Part of 4W3724-Page 10

j47717e XEBP7314

For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-2968	[5]	CAP
2.	9X-8916	[10]	BOLT (M16)
3.	5P-8247	[10]	WASHER
4.	6F-7062	[1]	WASHER
5.	8T-0293	[1]	BOLT (M12)
6.	2M-6471	[2]	PLUG
7.	2W-7211	[1]	BEARING
8.	2W-7213	[4]	BEARING
9.	3K-0360	[1]	SEAL
10.	9S-8005	[1]	PLUG (3/4)
11.	3D-2824	[1]	SEAL
12.	9S-8008	[1]	PLUG (1 1/16)
13.	2M-9780	[1]	SEAL
14.	9S-8006	[1]	PLUG (7/8)
15.	3H-5552	[1]	PLUG

#XEBP73140005

1W-8897: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

CYLINDER BLOCK COVER (1W8897 N/S)

j36694e XEBP7314

1W8897 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4F-9653	[ 1]	SEAL
2.	9S-4191	[ 3]	PLUG (9/16)
3.	3J-1907	[ 3]	SEAL
4.	7W-3871	[ 2]	COVER
5.	6V-2317	[ 7]	BOLT (M8)
6.	9M-1974	[ 19]	WASHER
7.	6V-5217	[ 12]	BOLT (M8)
8.	2W-6544	[ 1]	COVER
9.	7W-2426	[ 1]	GASKET
10.	9Y-0747	[ 1]	MANIFOLD
11.	6V-5842	[ 2]	BOLT (M10)
12.	6V-5839	[ 2]	WASHER
13.	7W-3872	[ 4]	SLEEVE
14.	7W-9699	[ 2]	GASKET

#XEBP73140006

4W-3462: CARRIER GP-SEAL

CARRIER GP-SEAL

CARRIER (4W3462 N/S)

j44028e XEBP7314

For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-3940	[8]	BOLT
2.	9M-1974	[8]	WASHER
3.	2W-6546	[1]	COVER
4.	6V-6640 B		SEALANT
5.	6V-3538	[2]	DOWEL
	B		USE AS REQUIRED

#XEBP73140007

4W-3579: CRANKSHAFT GP

CRANKSHAFT GP

CRANKSHAFT (4W3579 N/S)

j36695e XEBP7314

For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4W-3989	[1]	CRANKSHAFT ASSEM.
	7C-7980 B	[1]	SLEEVE
2.	1B-8705	[1]	KEY
3.	2W-8147	[1]	GEAR (50 TEETH)
4.	7W-9416	[1]	BEARING (THRUST)
	7C-6969 AB		BEARING
			(THRUST 0.5 mm 0.S.)
	7C-6970 AB		BEARING
			(THRUST 0.5 mm U.S. - 0.5 mm O.S.)
	7C-6966 AB		BEARING
			(THRUST 0.25 mm U.S.)
	7C-6967 AB		BEARING
			(THRUST 0.5 mm U.S.)
5.	7W-9417	[3]	BEARING (MAIN)
	7C-6974 AB		BEARING
			(MAIN 0.5 mm 0.S.)
	7C-6975 AB		BEARING
			(MAIN 0.5 mm U.S. - 0.5 mm O.S.)
	7C-6971 AB		BEARING
			(MAIN 0.25 mm U.S.)
	7C-6972 AB		BEARING
			(MAIN 0.5 mm U.S.)
6.	7W-9414	[1]	BEARING (MAIN)
	7C-6964 AB		BEARING
			(MAIN 0.5 mm 0.S.)
	7C-6965 AB		BEARING
			(MAIN 0.5 mm U.S. - 0.5 mm O.S.)
	7C-6961 AB		BEARING
			(MAIN 0.25 mm U.S.)
	7C-6962 AB		BEARING
			(MAIN 0.5 mm U.S.)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#XEBP73140008

7E-7590: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

CRANKSHAFT SEAL (7E7590 N/S)

j37666e XEBP7314

For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	7E-7589	[1]	SEAL GROUP
2.	7C-4163	[1]	SEAL GROUP

#XEBP73140009

9Y-4914: PULLEY GP-CRANKSHAFT

PULLEY GP-CRANKSHAFT

CRANKSHAFT PULLEY (9Y4914 N/S)

j37621e XEBP7314

9Y4914 PULLEY GP-CRANKSHAFT Parts scheme

For full view, you need register

Parts for your 918F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-1748	[1]	PULLEY
2.	8T-3666	[4]	BOLT
3.	2W-7381	[1]	WASHER

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Engine Design
3114, 3116, 3126 Engines

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Systems Operation

General Information
3114, 3116, and 3126 Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Testing and Adjusting

Engine Speed - Check
3114, 3116, and 3126 Engines

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/08/28

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

Caterpillar Parts SIS Catalog 918F :

7C-3574 ENGINE AR

4W-3724 CYLINDER BLOCK GP

4Y-6319 CYLINDER BLOCK

1W-8897 COVER GP-CYLINDER BLOCK

4W-3462 CARRIER GP-SEAL

4W-3579 CRANKSHAFT GP

7E-7590 SEAL GP-CRANKSHAFT

9Y-4914 PULLEY GP-CRANKSHAFT

Truck sale:

22,507 USD

Caterpillar 918F, Construction
- Wheel Loaders
MICHIGAN CAT

21,079

Caterpillar 918F, Construction
- Wheel Loaders
TOROMONT CAT
Canada

USD $25,000

1993 CAT 918F

Tractor Ranch Inc.
Wills Point, Texas

Call

1994 CAT 918F

Zadoon Equipment
Wisconsin

$22,000 USD

CATERPILLAR 918F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
BUTLER MACHINERY CO
3401 33rd St SW - Fargo - North Dakota