AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G9892 RIPPER CYLINDER GROUP-102mm BORE x 451mm STROKE EFFECTIVE WITH SERIAL NO. 5ES00001-5ES00937, 6AS00001-6AS00461 PART OF 1081150-Page 460 AN ATTACHMENT D5M


HYDRAULIC SYSTEM
CYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
IMPLEMENTS
BULLDOZER GP

TRACK-TYPE TRACTOR D5M TRACK-TYPE TRACTOR 5ES
 D5M XL & D5M LGP TRACTORS / POWERSHIFT / 5ES00001-UP (MACHINE) POWERED BY 3116 ENGINE XEBP7389 D5M 5ES   (1996)

HYDRAULIC SYSTEM

CYLINDER GP
LIFT CYLINDER GROUP
105-9822 LIFT CYLINDER GROUP
TILT CYLINDER GROUP
106-3255 TILT CYLINDER GROUP
TILT CYLINDER GROUP
151-4861 TILT CYLINDER GROUP
TILT CYLINDER GROUP
160-0045 TILT CYLINDER GROUP
ANGLE CYLINDER GROUP
137-8456 ANGLE CYLINDER GROUP
ANGLE CYLINDER GROUP
152-6482 ANGLE CYLINDER GROUP
RIPPER CYLINDER GROUP
3G-9892 RIPPER CYLINDER GROUP
RIPPER CYLINDER GROUP
3G-9892 RIPPER CYLINDER GROUP
PIN
135-6416 PIN
RIPPER CYLINDER AND MOUNTING
108-1150 RIPPER CYLINDER AND MOUNTING
 

#XEBP73890450
 

3G-9892: RIPPER CYLINDER GROUP

3G9892 RIPPER CYLINDER GROUP-102mm BORE x 451mm STROKE
EFFECTIVE WITH SERIAL NO. 5ES00001-5ES00937, 6AS00001-6AS00461
PART OF 1081150-Page 460
AN ATTACHMENT
j045193 XEBP7389
3G9892 RIPPER CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6214 [1] PLUG  
2. 6J-2797 [1] RING  
3. 5J-5402 [1] SEAL ASSEM.  
4. [1] PISTON  
5. 1U-0399 [1] CYLINDER ASSEM.  
6. 6J-6917 [1] SEAL  
7. 5J-8200 [1] SEAL  
8. 7J-6461 [1] CROWN  
9. 1U-0398 [1] ROD ASSEM.  
10. 1K-6981 [1] SEAL  
11. 2K-6830 [1] RING  
12. 1H-8128 [1] SEAL  
13. 9T-3964 [1] HEAD  
14. 5P-8250 [1] WASHER  
15. 7J-5639 [1] BOLT (1)  
16. 4T-5613 [1] RING  
 

#XEBP73890451
 

3G-9892: RIPPER CYLINDER GROUP

3G9892 RIPPER CYLINDER GROUP-102mm BORE x 451mm STROKE
EFFECTIVE WITH SERIAL NO. 5ES00938-, 6AS00462-
PART OF 1081150-Page 460
AN ATTACHMENT
j121912 XEBP7389
3G9892 RIPPER CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6214 [1] PLUG  
2. 6J-2797 [1] WEAR RING  
3. 5J-5402 [1] SEAL ASSEM.  
4. 7J-6469 [1] PISTON  
5. 1U-0399 [1] CYLINDER ASSEM.  
6. 8C-9124 C [1] SEAL ASSEM.  
7. 5J-8200 [1] SEAL  
8. 7J-6461 [1] CROWN  
9. 1U-0398 [1] ROD ASSEM.  
10. 8C-9133 C [1] SEAL  
11. 2K-6830 [1] RING  
12. 1H-8128 [1] SEAL  
13. 9T-9258 C [1] HEAD  
14. 5P-8250 [1] WASHER  
15. 7J-5639 [1] BOLT (1-14)  
16. 4T-5613 [1] WEAR RING  
17. 8J-0484 C [1] RING  
  C   INDICATES CHANGE
 

#XEBP73890452
 

107-3909: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1073909 N/S)-LIFT/TILT-PART 1 OF 2
EFFECTIVE WITH SERIAL NO. 5ES00001-5ES00980, 6AS00001-6AS00463
PART OF 1077203-Page 346
j109116 XEBP7389
1073909 HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6431 [1] ROD END  
2. 8T-4137 [5] BOLT (M10X1.5)  
3. 8T-4121 [7] WASHER  
4. 3W-1495 [1] LEVER  
5. 7X-7915 [3] ROD END  
6. 8T-4133 [2] NUT (M10X.15)  
7. 8T-4186 [1] BOLT (M10X1.5)  
8. 8E-5962 [1] PLATE  
9. 8G-4659 [1] SHAFT ASSEM.  
10. 111-9870 [1] SHAFT ASSEM.  
11. 6V-7744 [2] LOCKNUT (M10X1.5)  
12. 111-9892 [1] SUPPORT  
13. 5C-7261 [4] NUT (M8X1.5)  
14. 8T-4195 [4] BOLT (M10X1.5)  
15. 111-9888 [1] ROD  
16. 3B-4617 [1] COTTER  
17. 111-9887 [1] ROD  
18. 118-9674 [1] ROD END  
19. 1B-0676 [3] PIN  
20. 3B-4615 [3] COTTER PIN  
21. 8T-4224 [1] WASHER  
22. 6V-9189 [1] LOCKNUT (M8X1.25)  
23. 8T-7547 [1] BOLT (M8X1.25)  
24. 115-1153 [1] HANDLE  
25. 8T-4244 [2] NUT (M12X1.25)  
26. 8T-4191 [1] BOLT (M10X1.5)  
27. 8T-4766 [1] ROD END  
28. 8T-4196 [1] BOLT (M10X1.5)  
29. 7F-3713 [2] ROD  
30. 111-9891 [1] SHAFT ASSEM.  
31. 3W-1493 [1] LEVER  
32. 111-9867 [1] ROD  
33. 111-9886 [1] YOKE  
 

#XEBP73890453
 

107-3909: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1073909 N/S)-LIFT/TILT-PART 2 OF 2
EFFECTIVE WITH SERIAL NO. 5ES00001-5ES00980, 6AS00001-6AS00463
PART OF 1077203-Page 346
j109117 XEBP7389
1073909 HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-9879 [1] LEVER  
2. 8T-4133 [1] NUT (M10X1.5)  
3. 111-9873 [1] ROD  
4. 8E-7364 [1] BOOT  
5. 111-9876 [1] SHAFT ASSEM.  
6. 6V-9189 [2] LOCKNUT (M8X1.25)  
7. 8T-7547 [2] BOLT (M8X1.25)  
8. 8T-4224 [2] WASHER  
9. 9X-8257 [5] WASHER  
10. 8T-4195 [5] BOLT (M10X1.5)  
11. 8T-4121 [5] WASHER  
12. 111-9890 [1] LEVER  
13. 1B-8704 [1] KEY  
14. 111-9871 [1] SUPPORT  
15. 1B-0676 [2] PIN  
16. 3B-4615 [2] COTTER PIN  
17. 5P-9209 [10] BERING  
18. 130-3675 [1] FILM  
 

#XEBP73890454
 

148-6574: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1486574 N/S)-LIFT/TILT/ANGLE-PART 1 OF 2
EFFECTIVE WITH SERIAL NO. 5ES00981-, 6AS00464-
PART OF 1077203-Page 346
j126823 XEBP7389
1486574 HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7492 [1] FILM  
2. 6V-9189 [2] LOCKNUT (M8X1.25)  
3. 8T-7547 [2] BOLT (M8X1.25)  
4. 8T-4224 [2] WASHER  
5. 8T-4137 [5] BOLT (M10X1.5)  
6. 8E-5962 [1] PLATE  
7. 7X-7662 [1] ROD END  
8. 6V-7744 [2] LOCKNUT (M10X1.5)  
9. 8T-4133 [3] NUT (M10X1.5)  
10. 7X-7915 [4] ROD END  
11. 3B-4617 [1] COTTER  
12. 8T-4121 [7] WASHER  
13. 8T-6431 [1] ROD END  
14. 8T-4186 [1] BOLT (M10X1.5)  
15. 111-9892 [1] SUPPORT  
16. 8E-7364 [1] BOOT  
17. 8G-4659 [1] SHAFT ASSEM.  
18. 111-9895 [1] YOKE  
19. 8T-4191 [1] BOLT (M10X1.5)  
20. 111-9870 SHAFT ASSEM.  
21. 8T-4766 [1] ROD END  
22. 8T-4195 [4] BOLT (M10X1.5)  
23. 111-9888 [1] ROD  
24. 5C-7261 [6] NUT (M8X1.25)  
25. 3W-1493 [1] LEVER  
26. 3B-4615 [4] COTTER PIN  
27. 1B-0676 [4] PIN  
28. 7F-3713 [3] ROD  
29. 8T-4244 [1] NUT (M12X1.75)  
30. 115-1153 [1] HANDLE  
31. 111-9887 [1] ROD  
32. 126-6733 [1] ROD  
33. 111-9873 [1] ROD  
34. 118-9674 [1] ROD END  
35. 8T-4196 [1] BOLT (M10X1.5)  
 

#XEBP73890455
 

148-6574: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1486574 N/S)-LIFT/TILT/ANGLE-PART 2 OF 2
EFFECTIVE WITH SERIAL NO. 5ES00981-, 6AS00464-
PART OF 1077203-Page 346
j126824 XEBP7389
1486574 HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9189 [3] LOCKNUT (M8X1.25)  
2. 126-6734 [1] LEVER ASSEM.  
3. 9X-8257 [6] WASHER  
4. 111-9890 [1] LEVER  
5. 1B-8704 [1] KEY  
6. 8T-4224 [2] WASHER  
7. 8T-7547 [2] BOLT (M8X1.25)  
8. 111-9871 [1] SUPPORT  
9. 111-9876 [1] SHAFT ASSEM.  
10. 3W-1615 [1] LEVER  
11. 3W-1495 [1] LEVER  
12. 111-9879 [1] LEVER  
13. 1B-0676 [3] PIN  
14. 3B-4615 [3] COTTER PIN  
15. 8T-4121 [5] WASHER  
16. 8T-4195 [5] BOLT (M10X.15)  
17. 111-9891 [1] SHAFT ASSEM.  
18. 7S-5757 [1] RING  
19. 112-1869 [1] BUSHING  
20. 8E-1370 [1] WASHER  
21. 5P-9209 [14] BEARING  
 

#XEBP73890456
 

126-2535: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1262535 N/S)-ANGLE
EFFECTIVE WITH SERIAL NO. 5ES00001-5ES00980, 6AS00001-6AS00463
PART OF 1077203-Page 346
j106092 XEBP7389
1262535 HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-0676 [2] PIN  
2. 3B-4615 [2] COTTER PIN  
3. 3W-1615 [1] LEVER  
4. 5P-9209 [4] BEARING  
5. 130-7492 [1] FILM  
6. 7F-3713 [1] ROD  
7. 7S-5757 [1] RING  
8. 7X-7662 [1] ROD END  
9. 7X-7915 [1] ROD END  
10. 8E-1370 [1] WASHER  
11. 126-6734 [1] LEVER ASSEM.  
12. 111-9895 [1] YOKE  
13. 126-6733 [1] ROD  
14. 112-1869 [1] BUSHING  
15. 8T-4224 [1] WASHER  
16. 9X-8257 [1] WASHER  
17. 5C-7261 [2] NUT (M8)  
18. 6V-9189 [2] LOCKNUT (M8)  
19. 8T-7547 [1] BOLT (M8)  
 

#XEBP73890457
 

107-3912: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1073912 N/S)-ANGLE
EFFECTIVE WITH SERIAL NO. 5ES00001-5ES00980, 6AS00001-6AS00463
PART OF 1369405-Page 347
AN ATTACHMENT
j060512 XEBP7389
1073912 HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-0676 [2] PIN  
2. 3B-4615 [2] COTTER PIN  
3. 3W-1615 [1] LEVER  
4. 5P-9209 [4] BEARING  
5. 6V-9528 [1] FILM (INSTRUCTION)  
6. 7F-3713 [1] ROD  
7. 7S-5757 [1] RING  
8. 7X-7662 [1] ROD END  
9. 7X-7915 [1] ROD END  
10. 8E-1370 [1] WASHER  
11. 111-9894 [1] LEVER ASSEM.  
12. 111-9895 [1] YOKE  
13. 111-9896 [1] ROD  
14. 112-1869 [1] BUSHING  
15. 8T-4224 [1] WASHER  
16. 9X-8257 [1] WASHER  
17. 5C-7261 [2] NUT (M8)  
18. 6V-9189 [2] LOCKNUT (M8)  
19. 8T-7547 [1] BOLT (M8)  
 

#XEBP73890458
 

107-3913: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1073913 N/S)-RIPPER
PART OF 1077274-Page 346, 347
AN ATTACHMENT
j060501 XEBP7389
1073913 HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-0676 [4] PIN  
2. 3B-4615 [4] COTTER PIN  
3. 3B-4617 [2] COTTER  
4. 5P-9209 [4] BEARING  
5. 6S-4084 [1] FILM  
6. 7F-3713 [1] ROD  
7. 8E-5962 [1] PLATE  
8. 8E-7364 [1] BOOT  
9. 8G-4667 [1] LEVER  
10. 8T-4229 [1] KNOB  
11. 111-9897 [1] ROD  
12. 111-9898 [1] ROD  
13. 111-9899 [1] BRACKET ASSEM.  
14. 111-9900 [1] LEVER  
15. 111-9901 [1] SHAFT ASSEM.  
16. 112-3862 [1] ROD END ASSEM.  
17. 118-9674 [1] ROD END  
18. 133-3387 [1] PLATE ASSEM.  
  8T-3490 [4] NUT (M10) (WELD)  
19. 5C-7261 [2] NUT (M8)  
20. 8T-4121 [11] WASHER  
21. 8T-4137 [7] BOLT (M10)  
22. 8T-4195 [8] BOLT (M10)  
23. 8T-4244 [2] NUT (M12)  
24. 9X-8257 [4] WASHER  
 

#XEBP73890459
 

104-7430: POWER ANGLE AND TILT BULLDOZER ARRANGEMENT

POWER ANGLE AND TILT BULLDOZER ARRANGEMENT (1047430 N/S)
EFFECTIVE WITH SERIAL NO. 5ES00001-5ES00369
AN ATTACHMENT
XEBP73890459 XEBP7389
  For full view, you need register

Parts for your D5M TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  104-7412 [1] ANGLING BLADE GROUP  
  104-7435 [1] C-FRAME GROUP  
  104-7425 [1] BULLDOZER LINK GROUP  
  106-4171 [1] ANGLE AND TILT CYLINDER LINES GROUP  
  135-6416 [1] BULLDOZER PIN GROUP  
  137-8456 [2] ANGLE CYLINDER GROUP  
  105-9822 [1] LIFT CYLINDER GROUP  
  106-3255 [1] TILT CYLINDER GROUP  
  137-9370 [1] BULLDOZER LINES GROUP  
  107-8126 [2] BEARING (INTO C-FRAME MOUNTING BORE IN MAIN FRAME)  
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D5M :

ANGLE CYLINDER GROUP
152-6482 ANGLE CYLINDER GROUP
ANGLE CYLINDER GROUP
137-8456 ANGLE CYLINDER GROUP
TILT CYLINDER GROUP
160-0045 TILT CYLINDER GROUP
TILT CYLINDER GROUP
151-4861 TILT CYLINDER GROUP
TILT CYLINDER GROUP
106-3255 TILT CYLINDER GROUP
LIFT CYLINDER GROUP
105-9822 LIFT CYLINDER GROUP
RIPPER LINES
108-1152 RIPPER LINES
RIPPER LINES
108-4212 RIPPER LINES
RIPPER CYLINDER GROUP
3G-9892 RIPPER CYLINDER GROUP
HYDRAULIC HAND CONTROL
107-3909 HYDRAULIC HAND CONTROL
HYDRAULIC HAND CONTROL
107-3909 HYDRAULIC HAND CONTROL
HYDRAULIC HAND CONTROL
148-6574 HYDRAULIC HAND CONTROL
HYDRAULIC HAND CONTROL
148-6574 HYDRAULIC HAND CONTROL
HYDRAULIC HAND CONTROL
126-2535 HYDRAULIC HAND CONTROL
HYDRAULIC HAND CONTROL
107-3912 HYDRAULIC HAND CONTROL
HYDRAULIC HAND CONTROL
107-3913 HYDRAULIC HAND CONTROL

Truck sale:

Caterpillar D5M
 
Caterpillar D5M
- Crawler dozers
ZIEGLER CAT
 
67,400 
Caterpillar D5M, Crawler dozers, Construction
- Crawler dozers
MADISA
Caterpillar D5M, Crawler dozers, Construction
45,000 
Caterpillar D5M, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
32.902 
Caterpillar D5MX, Bulldozer, Bau-Und Bergbauausrüstung


 
 
Caterpillar D5MMP, Construction
- Crawler dozers
ZEPPELIN BAUMASCHINEN
Germany
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.