1600054 TILT CYLINDER GROUP-139.7mm BORE X 114mm STROKE EFFECTIVE WITH SERIAL NO. 4HS00677-, 5NR00445- PART OF 1075599-Page 431, 432, 1075600-Page 440, 441, 1339154-Page 434, 435, 1339155-Page 437, 438 AN ATTACHMENT D6M

HYDRAULIC SYSTEM

CYLINDER GP

0. 160-0054 TILT CYLIN
1. 115-3523 TILT CYLIN
2. 137-5107 ANGLE CYLI
3. 152-6485 ANGLE CYLI
4. 9T-2716 RIPPER CYL
5. 9T-2716 RIPPER CYL

OPERATOR STATION

CONTROL GP-HYDRAULIC

6. 107-3909 HYDRAULIC
7. 107-3909 HYDRAULIC
8. 148-6574 HYDRAULIC
9. 148-6574 HYDRAULIC
0. INFORMATION

TRACK-TYPE TRACTOR D6M TRACK-TYPE TRACTOR 4HS
D6M XL & D6M LGP TRACTORS / POWERSHIFT / 4HS00001-UP (MACHINE) POWERED BY 3116 ENGINE XEBP7397 D6M 4HS (1996)

HYDRAULIC SYSTEM

CYLINDER GP

110-3269 LIFT CYLINDER GROUP

110-4761 TILT CYLINDER GROUP

151-4518 TILT CYLINDER GROUP

160-0054 TILT CYLINDER GROUP

115-3523 TILT CYLINDER GROUP

137-5107 ANGLE CYLINDER GROUP

152-6485 ANGLE CYLINDER GROUP

9T-2716 RIPPER CYLINDER GROUP

#XEBP73970460

160-0054: TILT CYLINDER GROUP

TILT CYLINDER GROUP

1600054 TILT CYLINDER GROUP-139.7mm BORE X 114mm STROKE
EFFECTIVE WITH SERIAL NO. 4HS00677-, 5NR00445-
PART OF 1075599-Page 431, 432, 1075600-Page 440, 441, 1339154-Page 434, 435, 1339155-Page 437, 438
AN ATTACHMENT

j128197 XEBP7397

1600054 TILT CYLINDER GROUP Parts scheme

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	160-0055	[1]	CYLINDER ASSEM.
2.	160-0305	[1]	BEARING
	8T-7567	[1]	RING
3.	1U-4049	[4]	WASHER
4.	160-0060	[1]	PISTON
5.	6E-0465	[1]	SEAL ASSEM.
6.	4J-4606	[1]	WEAR RING
7.	2H-9247	[1]	SEAL
8.	2K-2961	[1]	RING
9.	9T-6302	[1]	CROWN
10.	110-4771	[1]	HEAD
11.	204-9542 C	[1]	ROD ASSEM.
12.	7J-1309	[1]	BEARING
	1S-3311	[1]	RING
13.	167-2463 C	[1]	SEAL
14.	167-2312 C	[1]	SEAL
15.	167-2201 C	[1]	SEAL ASSEM.
16.	8T-5668	[1]	WEAR RING
17.	3J-9545	[1]	NUT (2-12)
18.	3B-8489	[3]	FITTING
	C		INDICATES CHANGE

#XEBP73970461

115-3523: TILT CYLINDER GROUP

TILT CYLINDER GROUP

1153523 TILT CYLINDER GROUP-165mm BORE X 128mm STROKE
EFFECTIVE WITH SERIAL NO. 4HS00001-
PART OF 1154472-Page 442
AN ATTACHMENT

j060822 XEBP7397

1153523 TILT CYLINDER GROUP Parts scheme

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-3089	[1]	CYLINDER ASSEM.
2.	2J-8489	[1]	BEARING
3.	8T-1605	[1]	BOLT (M36)
4.	3S-6162	[1]	WASHER
5.	3J-9703	[1]	RING
6.	4T-8695	[1]	SEAL ASSEM.
7.	116-3085	[1]	PISTON
8.	116-3083	[1]	HEAD
9.	116-3084	[1]	ROD ASSEM.
	8E-5703	[14]	SHIM (0.8MM THICK)
10.	8J-2880	[1]	CAP
11.	6V-9167	[4]	BOLT (M20)
12.	8E-5703	[28]	SHIM (0.8MM THICK)
13.	6V-7742	[4]	NUT (M20)
14.	7J-8955	[1]	RING
15.	7J-8956	[1]	SEAL
16.	6V-8133	[4]	BOLT (M24)
17.	6V-8237	[4]	WASHER
18.	8C-5218	[1]	SEAL
19.	5J-8300	[1]	SEAL
20.	8C-9126	[1]	SEAL ASSEM.
21.	9T-0094	[1]	RING
22.	7M-2275	[1]	RING

#XEBP73970462

137-5107: ANGLE CYLINDER GROUP

ANGLE CYLINDER GROUP

1375107 ANGLE CYLINDER GROUP-101.6mm BORE X 472mm STROKE
EFFECTIVE WITH SERIAL NO. 4HS00001-4HS00467, 5NR00001-5NR00309
PART OF 1075599-Page 430, 1075600-Page 439, 1339154-Page 433, 1339155-Page 436
AN ATTACHMENT

j060740 XEBP7397

1375107 ANGLE CYLINDER GROUP Parts scheme

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2175	[1]	BOLT (1-1/8)
2.	110-6501	[1]	WASHER
3.	122-9921	[1]	PISTON ASSEM.
4.	6J-2797	[1]	RING
5.	8C-9160	[1]	SEAL ASSEM.
6.	9X-4611	[1]	SEAL
7.	2K-6830	[1]	RING
8.	135-7393	[1]	HEAD
9.	137-5106	[1]	ROD ASSEM.
10.	2H-5549	[1]	RING
	4D-4431	[1]	BEARING
11.	8J-0484	[1]	RING
12.	8C-9124	[1]	SEAL ASSEM.
13.	5J-8200	[1]	SEAL
14.	8C-9133	[1]	SEAL
15.	110-3787	[1]	CYLINDER ASSEM.
16.	2H-5549	[1]	RING
	4D-4431	[1]	BEARING
17.	4T-5613	[1]	RING

#XEBP73970463

152-6485: ANGLE CYLINDER GROUP

ANGLE CYLINDER GROUP

1526485 ANGLE CYLINDER GROUP-101.6mm BORE X 472mm STROKE
EFFECTIVE WITH SERIAL NO. 4HS00468-, 5NR00310-
PART OF 1075599-Page 430, 431, 432, 1075600-Page 439, 440, 441, 1339154-Page 433, 434, 435, 1339155-Page 436, 437, 438
AN ATTACHMENT

j064774 XEBP7397

1526485 ANGLE CYLINDER GROUP Parts scheme

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1J-2175	[1]	BOLT (1-1/8)
2.	110-6501	[1]	WASHER
3.	122-9921	[1]	PISTON ASSEM.
	8N-5083	[1]	SPRING
	8C-9160	[1]	SEAL ASSEM.
4.	9X-4611	[1]	SEAL
5.	2K-6830	[1]	RING
6.	135-7393	[1]	HEAD
7.	152-6486	[1]	ROD ASSEM.
	2H-5549	[1]	RING
	4D-4431	[1]	BEARING
8.	8J-0484	[1]	RING
9.	8C-9124	[1]	SEAL ASSEM.
10.	5J-8200	[1]	SEAL
11.	8C-9133	[1]	SEAL
12.	110-3787	[1]	CYLINDER ASSEM.
13.	4T-5613	[1]	RING

#XEBP73970464

9T-2716: RIPPER CYLINDER GROUP

RIPPER CYLINDER GROUP

9T2716 RIPPER CYLINDER GROUP-127mm BORE X 362mm STROKE
EFFECTIVE WITH SERIAL NO. 4HS00001-4HS00504, 5NR00001-5NR00406
PART OF 1210787-Page 480, 1555321-Page 480, 481
AN ATTACHMENT

j058143 XEBP7397

9T2716 RIPPER CYLINDER GROUP Parts scheme

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3G-1753	[1]	PISTON
2.	4J-3420	[1]	RING
3.	5J-5020	[1]	SEAL ASSEM.
4.	9T-2715	[1]	CYLINDER ASSEM.
5.	4K-3128	[1]	BEARING
6.	9T-6863	[1]	HEAD
7.	8C-3839	[1]	SEAL ASSEM.
8.	5J-0964	[1]	SEAL
9.	8C-3840	[1]	SEAL
10.	9T-2714	[1]	ROD ASSEM.
11.	2K-4507	[1]	BEARING
12.	1D-4628	[4]	BOLT (7/8)
	5P-8249	[4]	WASHER
13.	2K-4096	[1]	RING
14.	5F-3144	[1]	SEAL
15.	3G-1757	[1]	WASHER
16.	2J-0564	[1]	NUT (2)
17.	8T-5668	[1]	RING

#XEBP73970465

9T-2716: RIPPER CYLINDER GROUP

RIPPER CYLINDER GROUP

9T2716 RIPPER CYLINDER GROUP-127mm BORE X 362mm STROKE
EFFECTIVE WITH SERIAL NO. 4HS00505-, 5NR00407-
PART OF 1210787-Page 480, 1555321-Page 480, 481
AN ATTACHMENT

j127749 XEBP7397

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3G-1753	[1]	PISTON
2.	4J-3420	[1]	WEAR RING
3.	5J-5020	[1]	SEAL ASSEM.
4.	9T-2715	[1]	CYLINDER ASSEM.
5.	4K-3128	[2]	BEARING
6.	9T-6863	[1]	HEAD
7.	8C-3839	[1]	SEAL ASSEM.
8.	5J-0964	[1]	SEAL
9.	8C-3840	[1]	SEAL
10.	9T-2714	[1]	ROD ASSEM.
11.	2K-4507	[1]	BEARING
12.	1D-4628	[4]	BOLT (7/8-9)
	5P-8249	[4]	WASHER
13.	2K-4096	[1]	RING
14.	5F-3144	[1]	SEAL
15.	3G-1757	[1]	WASHER
16.	2J-0564	[1]	NUT (2-12)
17.	8T-5668	[1]	WEAR RING
18.	1P-4576 C	[4]	FLANGE
19.	8T-4896 C	[8]	WASHER
20.	5S-7382 C	[8]	BOLT (3/8-16)
	C		INDICATES CHANGE

#XEBP73970466

107-3909: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1073909 N/S)-LIFT/TILT/ANGLE-PART 1 OF 2
EFFECTIVE WITH SERIAL NO. 4HS00001-4HS00685 (STD), 5NR00001-5NR00454 (STD), 4HS00686- (ATT), 5NR00455- (ATT)
PART OF 1074473-Page 358, 1075934-Page 359, 1075935-Page 360

j109116 XEBP7397

1073909 HYDRAULIC HAND CONTROL Parts scheme

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-6431	[1]	ROD END
2.	8T-4137	[5]	BOLT (M10X1.5)
3.	8T-4121	[7]	WASHER
4.	3W-1495	[1]	LEVER
5.	7X-7915	[3]	ROD END
6.	8T-4133	[2]	NUT (M10X.15)
7.	8T-4186	[1]	BOLT (M10X1.5)
8.	8E-5962	[1]	PLATE
9.	8G-4659	[1]	SHAFT ASSEM.
10.	111-9870	[1]	SHAFT ASSEM.
11.	6V-7744	[2]	LOCKNUT (M10X1.5)
12.	111-9892	[1]	SUPPORT
13.	5C-7261	[4]	NUT (M8X1.5)
14.	8T-4195	[4]	BOLT (M10X1.5)
15.	111-9888	[1]	ROD
16.	3B-4617	[1]	COTTER
17.	111-9887	[1]	ROD
18.	118-9674	[1]	ROD END
19.	1B-0676	[3]	PIN
20.	3B-4615	[3]	COTTER PIN
21.	8T-4224	[1]	WASHER
22.	6V-9189	[1]	LOCKNUT (M8X1.25)
23.	8T-7547	[1]	BOLT (M8X1.25)
24.	115-1153	[1]	HANDLE
25.	8T-4244	[2]	NUT (M12X1.25)
26.	8T-4191	[1]	BOLT (M10X1.5)
27.	8T-4766	[1]	ROD END
28.	8T-4196	[1]	BOLT (M10X1.5)
29.	7F-3713	[2]	ROD
30.	111-9891	[1]	SHAFT ASSEM.
31.	3W-1493	[1]	LEVER
32.	111-9867	[1]	ROD
33.	111-9886	[1]	YOKE

#XEBP73970467

107-3909: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1073909 N/S)-LIFT/TILT/ANGLE-PART 2 OF 2
EFFECTIVE WITH SERIAL NO. 4HS00001-4HS00685 (STD), 5NR00001-5NR00454 (STD), 4HS00686- (ATT), 5NR00455- (ATT)
PART OF 1074473-Page 358, 1075934-Page 359, 1075935-Page 360

j109117 XEBP7397

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	111-9879	[1]	LEVER
2.	8T-4133	[1]	NUT (M10X1.5)
3.	111-9873	[1]	ROD
4.	8E-7364	[1]	BOOT
5.	111-9876	[1]	SHAFT ASSEM.
6.	6V-9189	[2]	LOCKNUT (M8X1.25)
7.	8T-7547	[2]	BOLT (M8X1.25)
8.	8T-4224	[2]	WASHER
9.	9X-8257	[5]	WASHER
10.	8T-4195	[5]	BOLT (M10X1.5)
11.	8T-4121	[5]	WASHER
12.	111-9890	[1]	LEVER
13.	1B-8704	[1]	KEY
14.	111-9871	[1]	SUPPORT
15.	1B-0676	[2]	PIN
16.	3B-4615	[2]	COTTER PIN
17.	5P-9209	[10]	BERING
18.	130-3675	[1]	FILM

#XEBP73970468

148-6574: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1486574 N/S)-LIFT/TILT/ANGLE-PART 1 OF 2
EFFECTIVE WITH SERIAL NO. 4HS00686-, 5NR00455-
PART OF 1074473-Page 358

j126823 XEBP7397

1486574 HYDRAULIC HAND CONTROL Parts scheme

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7492	[1]	FILM
2.	6V-9189	[2]	LOCKNUT (M8X1.25)
3.	8T-7547	[2]	BOLT (M8X1.25)
4.	8T-4224	[2]	WASHER
5.	8T-4137	[5]	BOLT (M10X1.5)
6.	8E-5962	[1]	PLATE
7.	7X-7662	[1]	ROD END
8.	6V-7744	[2]	LOCKNUT (M10X1.5)
9.	8T-4133	[3]	NUT (M10X1.5)
10.	7X-7915	[4]	ROD END
11.	3B-4617	[1]	COTTER
12.	8T-4121	[7]	WASHER
13.	8T-6431	[1]	ROD END
14.	8T-4186	[1]	BOLT (M10X1.5)
15.	111-9892	[1]	SUPPORT
16.	8E-7364	[1]	BOOT
17.	8G-4659	[1]	SHAFT ASSEM.
18.	111-9895	[1]	YOKE
19.	8T-4191	[1]	BOLT (M10X1.5)
20.	111-9870		SHAFT ASSEM.
21.	8T-4766	[1]	ROD END
22.	8T-4195	[4]	BOLT (M10X1.5)
23.	111-9888	[1]	ROD
24.	5C-7261	[6]	NUT (M8X1.25)
25.	3W-1493	[1]	LEVER
26.	3B-4615	[4]	COTTER PIN
27.	1B-0676	[4]	PIN
28.	7F-3713	[3]	ROD
29.	8T-4244	[1]	NUT (M12X1.75)
30.	115-1153	[1]	HANDLE
31.	111-9887	[1]	ROD
32.	126-6733	[1]	ROD
33.	111-9873	[1]	ROD
34.	118-9674	[1]	ROD END
35.	8T-4196	[1]	BOLT (M10X1.5)

#XEBP73970469

148-6574: HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL

HYDRAULIC HAND CONTROL (1486574 N/S)-LIFT/TILT/ANGLE-PART 2 OF 2
EFFECTIVE WITH SERIAL NO. 4HS00686-, 5NR00455-
PART OF 1074473-Page 358

j126824 XEBP7397

For full view, you need register

Parts for your D6M TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-9189	[3]	LOCKNUT (M8X1.25)
2.	126-6734	[1]	LEVER ASSEM.
3.	9X-8257	[6]	WASHER
4.	111-9890	[1]	LEVER
5.	1B-8704	[1]	KEY
6.	8T-4224	[2]	WASHER
7.	8T-7547	[2]	BOLT (M8X1.25)
8.	111-9871	[1]	SUPPORT
9.	111-9876	[1]	SHAFT ASSEM.
10.	3W-1615	[1]	LEVER
11.	3W-1495	[1]	LEVER
12.	111-9879	[1]	LEVER
13.	1B-0676	[3]	PIN
14.	3B-4615	[3]	COTTER PIN
15.	8T-4121	[5]	WASHER
16.	8T-4195	[5]	BOLT (M10X.15)
17.	111-9891	[1]	SHAFT ASSEM.
18.	7S-5757	[1]	RING
19.	112-1869	[1]	BUSHING
20.	8E-1370	[1]	WASHER
21.	5P-9209	[14]	BEARING

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Service Letter-NACD

PSP FOR REWORKING THE TILT CYLINDER PISTON RETAINING BOLTS THAT LOOSENS ON CERTAIN D6M TRACTORS - PS4663 - MAILED US AND CAN ADA, CACO, COFA, CAPL, CCL, COSA- REVISED 06/01
PSP FOR REWORKING THE TILT CYLINDER PISTON RETAINING BOLTS THAT LOOSENS ON CERTAIN D6M TRACTORS - PS4663 - MAILED US AND CAN ADA, CACO, COFA, CAPL, CCL, COSA- REVISED 06/01

PRODUCT SUPPORT PROGRAM FOR ADDING STRONGER ANGLE CYLINDER GREASE LINES ON CERTAIN D5M AND D6M TRACK TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR ADDING STRONGER ANGLE CYLINDER GREASE LINES ON CERTAIN D5M AND D6M TRACK TYPE TRACTORS

PRODUCT SUPPORT PROGRAM FOR ADDING STOPS TO THE BLADE TO PREVENT ANGLE CYLINDER FAILURES ON CERTAIN D6M TRACTORS
PRODUCT SUPPORT PROGRAM FOR ADDING STOPS TO THE BLADE TO PREVENT ANGLE CYLINDER FAILURES ON CERTAIN D6M TRACTORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Specifications

Relief Valve For Head and Rod Ends Of Bulldozer Angle Cylinder
D6M Track-Type Tractor Hydraulic System

Relief Valve For Rod Ends Of Bulldozer Lift Cylinders
D6M Track-Type Tractor Hydraulic System

Ripper Lift Cylinder
D6M Track-Type Tractor Hydraulic System

Bulldozer Tilt Cylinder
D6M Track-Type Tractor Hydraulic System

Bulldozer Lift Cylinder
D6M Track-Type Tractor Hydraulic System

Bulldozer Angle Cylinder
D6M Track-Type Tractor Hydraulic System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Information Release Memo

PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS

Service Letter-APD

Bench Test Procedures

Disassembly and Assembly

Bulldozer Angle Cylinder - Install
D6M Track-Type Tractor Machine Systems

Bulldozer Angle Cylinder - Remove
D6M Track-Type Tractor Machine Systems

Bulldozer Lift Cylinder - Install
D6M Track-Type Tractor Machine Systems

Bulldozer Lift Cylinder - Remove
D6M Track-Type Tractor Machine Systems

Bulldozer Lift Cylinder Mounts - Remove and Install
D6M Track-Type Tractor Machine Systems

Bulldozer Tilt Cylinder - Install
D6M Track-Type Tractor Machine Systems

Bulldozer Tilt Cylinder - Remove
D6M Track-Type Tractor Machine Systems

Bulldozer Lift Cylinder (VPAT) - Remove and Install
D6M Track-Type Tractor Machine Systems

Bulldozer Tilt Cylinder (VPAT) - Remove and Install
D6M Track-Type Tractor Machine Systems

Service Magazine

Angle Cylinders Modified To Prevent Piston Retaining Bolt Loosening {5101}
1998/06/22

New Angle Cylinders Have Longer Rods To Prevent Loosening Of Piston Retaining Bolt {5101}
1998/07/27

New Tilt Cylinders Use Piston For Stopping Retracted Rod{5104}
1999/06/07

New Tilt Cylinders Use Rod For Stopping And Nut For Retaining Piston {5104}
1999/07/12

New Grease Lines for Angle Cylinders Improve Reliability {5101}
2000/02/21

New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06

New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08

Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30

Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09

New Double Lip Wiper Seals Are Now Used On All Track-Type Tractor Cylinders {5102}
2004/12/06

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6M :

160-0054 TILT CYLINDER GROUP

151-4518 TILT CYLINDER GROUP

110-4761 TILT CYLINDER GROUP

110-3269 LIFT CYLINDER GROUP

3A-8610 RIPPER LINES

108-4350 RIPPER LINES

107-4108 ANGLE AND TILT LINES

112-3447 ANGLE AND TILT CYLINDER LINES

115-3523 TILT CYLINDER GROUP

137-5107 ANGLE CYLINDER GROUP

152-6485 ANGLE CYLINDER GROUP

9T-2716 RIPPER CYLINDER GROUP

107-3909 HYDRAULIC HAND CONTROL

148-6574 HYDRAULIC HAND CONTROL

Truck sale:

Caterpillar D6M
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI

56,500

Caterpillar D6M, Crawler dozers, Construction

Caterpillar D6M, Construction
- Crawler dozers
NMC