AVSPARE.COM
parts catalog

D6R TRACTORS / POWERSHIFT / 5PR00001-UP (MACHINE) POWERED BY 3306 ENGINE UNDERCARRIAGE Caterpillar SIS




Parts group D6R:

  For full view, you need register
UNDERCARRIAGE

Information:

(For parts list, see above)

Disassembly and Assembly
Track Adjustment
D6R TRACK-TYPE TRACTOR POWER TRAIN
Track Adjuster
D6R TRACK-TYPE TRACTOR POWER TRAIN
Service Magazine
Operation and Maintenance Manual
Equalizer Bar Pins - Inspect
D6R Track-Type Tractor
Equalizer Bar Pins - Lubricate
D6R Track-Type Tractor
Special Instruction
Replacement of the Equalizer Bar Saddle {7206}
Replacement of the Equalizer Bar Saddle {7206}
Specifications
Equalizer Bar
D6R Track-Type Tractor Power Train
Systems Operation
Equalizer Bar
D6R Track-Type Tractor Power Train
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Disassembly and Assembly
Equalizer Bar
D6R TRACK-TYPE TRACTOR POWER TRAIN
Service Magazine
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Operation and Maintenance Manual
Front Idler Position - Check
D6R Track-Type Tractor
Special Instruction
Installation of Center Tread Idlers{4159}
Installation of Center Tread Idlers{4159}
Adjustment of the Position of the Front Idlers and the Balance of the Machine for Improved Ride or Improved Fine Dozing{4159}
Adjustment of the Position of the Front Idlers and the Balance of the Machine for Improved Ride or Improved Fine Dozing{4159}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation Of Lower Scrapers On Center Tread Idlers{4159}
Installation Of Lower Scrapers On Center Tread Idlers{4159}
Relieved Tread Idler Installation On D6R, D6R Series II, D6R Series III, and D6T Machines Equipped With SystemOne Undercarriage{4159}
Relieved Tread Idler Installation On D6R, D6R Series II, D6R Series III, and D6T Machines Equipped With SystemOne Undercarriage{4159}
Relieved Tread Idler Wear and Re-Use Guidelines{4150, 4159}
Relieved Tread Idler Wear and Re-Use Guidelines{4150, 4159}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D5M, D5N, D6M, D6N, D6H, AND D6R TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D5M, D5N, D6M, D6N, D6H, AND D6R TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Modification To The Spacer Plate For The Recoil Spring
Modification To The Spacer Plate For The Recoil Spring
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Difficulty in Assembling Cap onto Idler Shaft & Block for Certain Medium Track-Type Tractors {4159}
Difficulty in Assembling Cap onto Idler Shaft & Block for Certain Medium Track-Type Tractors {4159}
Specifications
Idlers (Track)
D6R Track-Type Tractor Power Train
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D5M, D5N, D6M, D6N, D6H, AND D6R TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D5M, D5N, D6M, D6N, D6H, AND D6R TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE
Service Letter-Asia
Systems Operation
Track Idler
D6R Track-Type Tractor Power Train
Undercarriage Reconditioning Bulletin
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Disassembly and Assembly Procedures for Idlers with Conventional Duo-Cone Seals {4159, 4180}
Disassembly and Assembly Procedures for Idlers with Conventional Duo-Cone Seals {4159, 4180}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Disassembly and Assembly Procedures for Idlers with Inverted Duo-Cone Seals {4159, 7561, 7561}
Disassembly and Assembly Procedures for Idlers with Inverted Duo-Cone Seals {4159, 7561, 7561}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Information Release Memo
D6H/R/T CONVENTIONAL IDLER IDENTIFICATION MARKINGS UPDATED
D6H/R/T CONVENTIONAL IDLER IDENTIFICATION MARKINGS UPDATED
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D5M, D5N, D6M, D6N, D6H, AND D6R TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED CENTER TREAD IDLERS ON CERTAIN D5M, D5N, D6M, D6N, D6H, AND D6R TRACK-TYPE TRACTORS EQUIPPED WITH SYSTEMONE UNDERCARRIAGE
Disassembly and Assembly
Idlers
D6R TRACK-TYPE TRACTOR POWER TRAIN
Service Magazine
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Improvements Have Been Made To The Idler Block On Certain D6R and D6T Track-Type Tractors {4159}
Improvements Have Been Made To The Idler Block On Certain D6R and D6T Track-Type Tractors {4159}
Center Tread Idler (CTI) Wear and Re-use Guideline {4159}
Center Tread Idler (CTI) Wear and Re-use Guideline {4159}
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Special Instruction
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Root Cause of Dry Track Joints and Procedure to Determine the Proper Corrective Action for SystemOne Undercarriage on Certain Track-Type Tractors{4150}
Root Cause of Dry Track Joints and Procedure to Determine the Proper Corrective Action for SystemOne Undercarriage on Certain Track-Type Tractors{4150}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Undercarriage Reconditioning Bulletin
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Removing SystemOne Track Links {0677, 0678, 0729, 4169, 4170, 4171}
Removing SystemOne Track Links {0677, 0678, 0729, 4169, 4170, 4171}
Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}
SystemOne Tool Reference {0729, 4150}
SystemOne Tool Reference {0729, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REWORKING TRACK CARTRIDGES THAT HAVE WALKED OUT OF LOCATION ON CERTAIN D6H AND D6R TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Service Magazine
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Heavy Duty Extended Life (HDXL) Track Replaces Heavy Duty Track for Certain D6T and D6R Track-Type Tractors {4169, 4170, 4171}
Heavy Duty Extended Life (HDXL) Track Replaces Heavy Duty Track for Certain D6T and D6R Track-Type Tractors {4169, 4170, 4171}
Operation and Maintenance Manual
Pivot Shaft Oil Level - Check
D6R Track-Type Tractor
Service Magazine
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Special Instruction
Installation Procedure for Pivot Shaft Seal{4153}
Installation Procedure for Pivot Shaft Seal{4153}
Specifications
Pivot Shaft
D6R Track-Type Tractor Power Train
Disassembly and Assembly
Pivot Shaft (Stub Shaft)
D6R TRACK-TYPE TRACTOR POWER TRAIN
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Specifications
Track Carrier Roller
D6R Track-Type Tractor Power Train
Track Roller
D6R Track-Type Tractor Power Train
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Systems Operation
Track Carrier Roller
D6R Track-Type Tractor Power Train
Track Roller
D6R Track-Type Tractor Power Train
Undercarriage Reconditioning Bulletin
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Repair Procedure for Retainer Assemblies on Track Idlers and Rollers {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Carrier Roller Oil Fill Volume {4154}
Carrier Roller Oil Fill Volume {4154}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Carrier Roller Disassembly and Assembly Procedures {4154}
Carrier Roller Disassembly and Assembly Procedures {4154}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180}
Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Track Rollers
D6R TRACK-TYPE TRACTOR POWER TRAIN
Service Magazine
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
New Track Roller Cap and Track Guard Bolts Are Now Available for Certain D6, D6 XE, D6R, and D6T Track-Type Tractors {4177, 4180, 7152}
New Track Roller Cap and Track Guard Bolts Are Now Available for Certain D6, D6 XE, D6R, and D6T Track-Type Tractors {4177, 4180, 7152}
Special Instruction
Installation Of Lower Scrapers On Center Tread Idlers{4159}
Installation Of Lower Scrapers On Center Tread Idlers{4159}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING LOWER SCRAPERS FOR THE CENTER TREAD IDLERS ON CERTAIN D6H, D6H LGP, D6R, D6R LGP, D6R II, AND D6R II LGP TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING LOWER SCRAPERS FOR THE CENTER TREAD IDLERS ON CERTAIN D6H, D6H LGP, D6R, D6R LGP, D6R II, AND D6R II LGP TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Undercarriage Reconditioning Bulletin
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Operation and Maintenance Manual
Special Instruction
Disassembly of Front Track Roller Frame with a Damaged Guide Key Slot and/or Weld Connections{4151, 4158}
Disassembly of Front Track Roller Frame with a Damaged Guide Key Slot and/or Weld Connections{4151, 4158}
A Stronger Recoil Spring Prevents Jumping of the Track{4158}
A Stronger Recoil Spring Prevents Jumping of the Track{4158}
Technical Information Bulletin
Modification To The Spacer Plate For The Recoil Spring
Modification To The Spacer Plate For The Recoil Spring
Service Magazine
Operation and Maintenance Manual
Track Adjustment - Check
D6R Track-Type Tractor
Track Adjustment - Adjust
D6R Track-Type Tractor
Special Instruction
Adjustment and Modification Procedures to Alleviate Track Jumping/Indexing
Adjustment and Modification Procedures to Alleviate Track Jumping/Indexing
Technical Information Bulletin
Modification To The Spacer Plate For The Recoil Spring
Modification To The Spacer Plate For The Recoil Spring
Specifications
Recoil Group
D6R Track-Type Tractor Power Train
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Disassembly and Assembly
Track Adjustment
D6R TRACK-TYPE TRACTOR POWER TRAIN
Recoil Springs
D6R TRACK-TYPE TRACTOR POWER TRAIN
Track Adjuster
D6R TRACK-TYPE TRACTOR POWER TRAIN
Service Magazine
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Operation and Maintenance Manual
Track Pins - Inspect
D6R Track-Type Tractor
Tracks
D6R Track-Type Tractor
Track Adjustment - Check
D6R Track-Type Tractor
Track Adjustment - Adjust
D6R Track-Type Tractor
Special Instruction
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
SystemOne Track Guiding Arrangements {4170, 4177}
SystemOne Track Guiding Arrangements {4170, 4177}
Field Repair of SystemOne Track with the SystemOne Portable Track Press {4170}
Field Repair of SystemOne Track with the SystemOne Portable Track Press {4170}
Overview of SystemOne Undercarriage{4150}
Overview of SystemOne Undercarriage{4150}
Procedure To Convert SystemOne Undercarriage to Heavy Duty Undercarriage on Certain D6R and D6T STD Track-Type Tractors {4150, 4151, 4170, 4177, 7152}
Procedure To Convert SystemOne Undercarriage to Heavy Duty Undercarriage on Certain D6R and D6T STD Track-Type Tractors {4150, 4151, 4170, 4177, 7152}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Track Joint Inspection and Lubrication Procedure Using <NOBR> 8T-3115</NOBR> Lubricator Gp - Portable Track {0646, 4169, 4170}
Track Joint Inspection and Lubrication Procedure Using 8T-3115 Lubricator Gp - Portable Track {0646, 4169, 4170}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Inspect Track Seal Load Rings
Inspect Track Seal Load Rings
Track Guide Wear Strips
Track Guide Wear Strips
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Specifications
Tracks
D6R Track-Type Tractor Power Train
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Service Letter-Asia
Systems Operation
Tracks
D6R Track-Type Tractor Power Train
Undercarriage Reconditioning Bulletin
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Removing SystemOne Track Links {0677, 0678, 0729, 4169, 4170, 4171}
Removing SystemOne Track Links {0677, 0678, 0729, 4169, 4170, 4171}
Field Repair of SystemOne Track with the SystemOne Portable Track Press {4170}
Field Repair of SystemOne Track with the SystemOne Portable Track Press {4170}
Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
Field Repair of SystemOne Track with the Multi-Pitch Track Press {0354, 0685, 4170}
Field Repair of SystemOne Track with the Multi-Pitch Track Press {0354, 0685, 4170}
Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180}
Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Information Release Memo
D6R, D6T, D7R, AND D7E MADE-TO-ORDER (MTO) TRACK GROUP PART NUMBER CHANGES
D6R, D6T, D7R, AND D7E MADE-TO-ORDER (MTO) TRACK GROUP PART NUMBER CHANGES
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
PRODUCT SUPPORT PROGRAM FOR REPLACING DRY TRACK CARTRIDGES ON CERTAIN D6H, D6R, AND D6T TRACK-TYPE TRACTORS WITH SYSTEMONE UNDERCARRIAGE
Testing and Adjusting
Track - Adjust
D6R Track-Type Tractor Power Train
Disassembly and Assembly
Track
D6R TRACK-TYPE TRACTOR POWER TRAIN
Service Magazine
Track Shoes Are Service-Replaced On Some D6 Track-Type Tractors {4170}
Track Shoes Are Service-Replaced On Some D6 Track-Type Tractors {4170}
A New Track Bolt Is Available For Certain D6R and D6T Track-Type Tractors Operating In Waste Applications {4170}
A New Track Bolt Is Available For Certain D6R and D6T Track-Type Tractors Operating In Waste Applications {4170}
Correction To Track Bolt And Master Bolt Torque Values For Certain D6 Track-Type Tractors {4170}
Correction To Track Bolt And Master Bolt Torque Values For Certain D6 Track-Type Tractors {4170}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
A New Track Bolt is Available for Certain D6R and D6T Track-Type Tractors Operating in Waste Applications {4170}
A New Track Bolt is Available for Certain D6R and D6T Track-Type Tractors Operating in Waste Applications {4170}
Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Routine Undercarriage Maintenance Recommendations are Now Available for Certain Track-Type Tractors {4150, 4153, 4159, 4170, 4175, 7206, 7207}
Heavy Duty Extended Life (HDXL) Track Replaces Heavy Duty Track for Certain D6T and D6R Track-Type Tractors {4169, 4170, 4171}
Heavy Duty Extended Life (HDXL) Track Replaces Heavy Duty Track for Certain D6T and D6R Track-Type Tractors {4169, 4170, 4171}
Operation and Maintenance Manual
Trunnion Bearing - Adjust
D6R Track-Type Tractor
Special Instruction
Root Cause of Dry Track Joints and Procedure to Determine the Proper Corrective Action for SystemOne Undercarriage on Certain Track-Type Tractors{4150}
Root Cause of Dry Track Joints and Procedure to Determine the Proper Corrective Action for SystemOne Undercarriage on Certain Track-Type Tractors{4150}
Procedure To Convert SystemOne Undercarriage to Heavy Duty Undercarriage on Certain D6R and D6T STD Track-Type Tractors {4150, 4151, 4170, 4177, 7152}
Procedure To Convert SystemOne Undercarriage to Heavy Duty Undercarriage on Certain D6R and D6T STD Track-Type Tractors {4150, 4151, 4170, 4177, 7152}
Relieved Tread Idler Wear and Re-Use Guidelines{4150, 4159}
Relieved Tread Idler Wear and Re-Use Guidelines{4150, 4159}
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Tool Operating Manual
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Systems Operation
Undercarriage
D6R Track-Type Tractor Power Train
Pivot Shaft
D6R Track-Type Tractor Power Train
Undercarriage Reconditioning Bulletin
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Reuse And Salvage Guidelines
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Service Magazine
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Undercarriage Reconditioning Bulletin
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Truck Engine News
Special Instruction
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Tool Operating Manual
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Undercarriage Reconditioning Bulletin
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Installation and Removal of SystemOne Clamp Master {0729, 4157, 4170, 4197}
Removing SystemOne Track Links {0677, 0678, 0729, 4169, 4170, 4171}
Removing SystemOne Track Links {0677, 0678, 0729, 4169, 4170, 4171}
SystemOne Tool Reference {0729, 4150}
SystemOne Tool Reference {0729, 4150}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Welding Wire and Flux {0679, 4150, 7950}
Welding Wire and Flux {0679, 4150, 7950}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Disassembly and Assembly Procedures for Track Rollers with Inverted Duo-Cone Seals {0599, 0729, 4180, 4180, 7555, 7561}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180}
Shop Repair Procedure for D6 and D7 Size Track with Positive Pin Retention 2 {4169, 4170, 4171, 4174, 4175, 4180}
Service Magazine
Operation and Maintenance Manual
Track Roller Frame - Inspect
D6R Track-Type Tractor
Special Instruction
Disassembly of Front Track Roller Frame with a Damaged Guide Key Slot and/or Weld Connections{4151, 4158}
Disassembly of Front Track Roller Frame with a Damaged Guide Key Slot and/or Weld Connections{4151, 4158}
Repair Cracks in the Rear Track Roller Frame {4151}
Repair Cracks in the Rear Track Roller Frame {4151}
Procedure To Convert SystemOne Undercarriage to Heavy Duty Undercarriage on Certain D6R and D6T STD Track-Type Tractors {4150, 4151, 4170, 4177, 7152}
Procedure To Convert SystemOne Undercarriage to Heavy Duty Undercarriage on Certain D6R and D6T STD Track-Type Tractors {4150, 4151, 4170, 4177, 7152}
Specifications
Track Roller Frames
D6R Track-Type Tractor Power Train
Tool Operating Manual
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Disassembly and Assembly
Front Track Roller Frames
D6R TRACK-TYPE TRACTOR POWER TRAIN
Track Roller Frames
D6R TRACK-TYPE TRACTOR POWER TRAIN
Pivot Shaft (Stub Shaft)
D6R TRACK-TYPE TRACTOR POWER TRAIN
Service Magazine
Tool Operating Manual
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Reuse And Salvage Guidelines
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Special Instruction
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Procedure To Convert SystemOne Undercarriage to Heavy Duty Undercarriage on Certain D6R and D6T STD Track-Type Tractors {4150, 4151, 4170, 4177, 7152}
Procedure To Convert SystemOne Undercarriage to Heavy Duty Undercarriage on Certain D6R and D6T STD Track-Type Tractors {4150, 4151, 4170, 4177, 7152}
Service Magazine
SystemOne Track Roller Guide Guards Can Be Reworked For Use With Heavy Duty Undercarriage {7152}
SystemOne Track Roller Guide Guards Can Be Reworked For Use With Heavy Duty Undercarriage {7152}
New Track Roller Cap and Track Guard Bolts Are Now Available for Certain D6, D6 XE, D6R, and D6T Track-Type Tractors {4177, 4180, 7152}
New Track Roller Cap and Track Guard Bolts Are Now Available for Certain D6, D6 XE, D6R, and D6T Track-Type Tractors {4177, 4180, 7152}
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Magazine
Special Instruction
SystemOne Track Guiding Arrangements {4170, 4177}
SystemOne Track Guiding Arrangements {4170, 4177}
Service Magazine

Truck sale:

 
 
Caterpillar D6R
- Crawler dozers
FINANZAUTO S.A.
76,850 
Caterpillar D6R, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
Caterpillar D6R
- Crawler dozers
MICHIGAN CAT
 
Caterpillar D6R
- Crawler dozers
PETERSON CAT
 
 
Caterpillar D6R2, Crawler dozers, Construction
- Crawler dozers
MANTRAC EGYPT
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. CatĀ® and CaterpillarĀ® are registered trademarks of Caterpillar, Inc.