AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1141459 GEAR & BEARING GP-PART 2 OF 2 S/N 1GS 00157-UP 325B L EXCAVATOR


FRAME AND BODY
GEAR & BEARING GP
FRAME GP
BUMPER GP
FRAME GP
UNDERCARRIAGE
IDLER GP
TRACK ADJUSTER & RECOIL GP
IDLER GP

EXCAVATOR 325B L EXCAVATOR 1GS
 325B L TRACK-TYPE EXCAVATOR /HAMMER ARRANGEMENT/ 1GS00001-UP (MACHINE) POWERED BY 3116 ENGINE XEBP7640 325B L 1GS   (1996)

FRAME AND BODY

GEAR & BEARING GP
GEAR & BEARING GP
114-1459 GEAR & BEARING GP
GEAR & BEARING GP
114-1459 GEAR & BEARING GP
GEAR & BEARING GP
114-1459 GEAR & BEARING GP
GEAR & BEARING GP
114-1459 GEAR & BEARING GP
 

#XEBP76400250
 

114-1459: GEAR & BEARING GP

1141459 GEAR & BEARING GP-PART 2 OF 2
S/N 1GS 00157-UP
h74119e XEBP7640
1141459 GEAR & BEARING GP Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0667 [38] BOLT (L=100mm)  
2. 8T-0669 [21] BOLT (L=130mm)  
3. 199-4483 [1] GEAR GP  
4. 148-4685 E SEAL (424cm)  
  148-4685 E [5] SEAL (425cm)  
6. 3B-8489 [1] FITTING  
7. 7Y-1649 [1] BOOT  
8. 093-0543 [1] RETAINER  
9. 8T-4121 [12] WASHER  
10. 8T-4136 [12] BOLT (L=25mm)  
11. 7Y-1650 [1] CLAMP  
12. 095-1302 [1] DOWEL  
13. 5K-9243 [1] ELBOW  
14. 3B-8489 [1] FITTING  
15. 8T-4199 [2] BOLT (L=12mm)  
16. 4N-9170 [2] CLIP  
17. 7Y-1647 [1] GASKET  
18. 7Y-1648 [1] STRIP  
19. 1U-8846 B GASKET MAKER (125ml)  
20. 7Y-1507 [38] SPACER  
21. 8T-0671 [14] BOLT (L=150mm)  
22. 093-0020 [35] SPACER  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#XEBP76400251
 

128-9812: FRAME GP-UPPER

1289812 FRAME GP-UPPER
S/N 1GS 1-00142
h56464e XEBP7640
1289812 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-9813 [1] FRAME AS  
2. 7Y-0633 [1] BOSS  
3. 8T-4123 [3] WASHER  
4. 5I-8913 [1] BUMPER  
5. 115-2775 [1] PIN AS  
6. 117-5435 [2] PIN AS  
7. 8T-4780 [3] BOLT (L=30mm)  
8. 096-6467 [2] WASHER  
9. 8T-4123 [19] NUT  
10. 093-0090 B [6] SHIM (T=1.0mm)  
  133-2427 B [3] SHIM (T=2.0mm)  
  093-0122 B [3] SHIM (T=0.5mm)  
11. 093-0363 [2] SPACER  
12. 093-0349 [1] WASHER  
13. 8T-4137 [4] BOLT (L=20mm)  
14. 8T-4121 [23] WASHER-HARD  
15. 8T-5413 [19] STUD  
  B   USE AS REQUIRED
 

#XEBP76400252
 

128-9812: FRAME GP-UPPER

1289812 FRAME GP-UPPER
S/N 1GS 00143-UP
h74121e XEBP7640
1289812 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-3248 [1] FRAME AS  
2. 7Y-0633 [1] BOSS  
3. 7Y-2318 [2] BOSS  
4. 7Y-8763 [1] BOSS  
4. 7Y-8763 [1] BOSS  
5. 113-2204 [1] PLATE AS  
6. 087-5841 [1] PLATE  
7. 8T-4780 [3] BOLT (L=30mm)  
8. 096-6467 [2] WASHER  
9. 8T-4133 [19] NUT  
10. 093-0090 B [6] SHIM (T=1.00mm)  
  133-2427 B [3] SHIM (T=0.50mm)  
  093-0122 B [3] SHIM (T=2.00mm)  
11. 093-0364 [2] SPACER  
12. 093-0349 [1] WASHER  
13. 8T-4195 [4] BOLT (L=30mm)  
14. 8T-4121 [23] WASHER  
15. 8T-4123 [3] WASHER  
16. 154-0551 [1] BUMPER AS  
17. 115-2775 [1] PIN AS  
18. 117-5435 [2] PIN AS  
19. 8T-5413 [19] STUD  
    THE FOLLOWING SERVICE REPAIR IS AVAILABLE:
  7I-6881 [1] PLATE (L=1100mm)  
  B   USE AS REQUIRED
 

#XEBP76400253
 

128-9999: BUMPER GP-SIDE

1289999 BUMPER GP-SIDE
h56465e XEBP7640
1289999 BUMPER GP-SIDE Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-0021 [2] BUMPER  
2. 129-0026 [1] BUMPER  
3. 129-0025 [1] BUMPER  
4. 130-4257 [1] BUMPER  
5. 130-4517 [2] BUMPER  
6. 8T-4223 [17] WASHER-HARD  
7. 8T-4244 [17] NUT  
 

#XEBP76400254
 

110-9894: FRAME AS-UNDERCARRIAGE

1109894 FRAME AS-UNDERCARRIAGE
h56456e XEBP7640
1109894 FRAME AS-UNDERCARRIAGE Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-7215 [4] STEP  
2. 113-2317 [4] BRACKET  
3. 7Y-3431 [2] PLATE  
4. 7Y-3430 [4] PLATE  
 

#XEBP76400255
 

115-6339: IDLER GP-FRONT

1156339 IDLER GP-FRONT
1156340-Page 178, 1028109-Page 181
h50125e XEBP7640
1156339 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2563 [4] BOLT (L=60mm)  
2. 102-8109 Y [2] ADJUSTMENT GP  
3. 115-6340 Y [2] IDLER GP  
  Y   SEPARATE ILLUSTRATION
 

#XEBP76400256
 

115-6340: IDLER GP-FRONT

1156340 IDLER GP-FRONT
PART OF 1156339-Page 178
1153696-Page 179, 1309292-Page 180
h50121e XEBP7640
1156340 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-9292 Y [1] SPRING GP  
2. 8T-6430 [4] BOLT (L=50mm)  
3. 115-3696 Y [1] IDLER GP  
  Y   SEPARATE ILLUSTRATION
 

#XEBP76400257
 

115-3696: IDLER GP-FRONT

1153696 IDLER GP-FRONT
PART OF 1156340-Page 178
h50094e XEBP7640
1153696 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-7471 [1] IDLER AS  
2. 6Y-2272 [2] BEARING  
3. 109-0885 [2] SEAL GP  
4. 8F-8882 [2] SEAL-O-RING (ID=66.27mm)  
5. 6Y-2266 [2] PIN  
6. 112-9951 [1] SHAFT  
7. 115-3697 [2] BEARING  
8. 7H-3171 [1] PLUG  
 

#XEBP76400258
 

130-9292: SPRING GP-RECOIL

1309292 SPRING GP-RECOIL
PART OF 1156340-Page 178
h50095e XEBP7640
1309292 SPRING GP-RECOIL Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-0555 [1] SUPPORT AS  
2. 7Y-0631 [1] SPRING  
3. 130-9293 [1] ROD  
4. 7Y-0725 [1] WASHER-HARD  
5. 8C-7328 [1] NUT  
6. 7Y-0734 [1] SUPPORT  
7. 7Y-0735 [1] STRIP  
8. 8T-9080 [2] BOLT (L=20mm)  
 

#XEBP76400259
 

102-8109: ADJUSTMENT GP-HYDRAULIC TRACK

1028109 ADJUSTMENT GP-HYDRAULIC TRACK
PART OF 1156339-Page 178
h50127e XEBP7640
1028109 ADJUSTMENT GP-HYDRAULIC TRACK Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4191 [2] BOLT (L=16mm)  
2. 113-2824 [1] PLATE AS  
3. 5P-9891 [1] PLATE  
4. 4B-4158 [4] SCREW  
5. 102-8112 [1] CYLINDER  
6. 093-1436 [1] SEAL  
7. 7Y-0680 [1] PISTON  
8. 7Y-0682 [2] RING-BACK UP  
9. 093-1512 [2] RING-BACK UP  
10. 095-1619 [2] SEAL-O-RING (ID=59.60mm)  
11. 095-2927 [1] VALVE (FILL)  
12. 2S-5926 [1] VALVE (RELIEF)  
 

Information:

Operation and Maintenance Manual
Swing Bearing - Lubricate
322B, 322B L, 325B and 325B L Excavators
Swing Gear - Lubricate
322B, 322B L, 325B and 325B L Excavators
Specifications
Gear And Bearing Group
325B & 325B L EXCAVATORS HYDRAULIC SYSTEM
Tool Operating Manual
451-0130 Swing Gear Inner Bearing Seal Installation Tool{0374, 0599, 0700, 0745, 7063}
451-0130 Swing Gear Inner Bearing Seal Installation Tool{0374, 0599, 0700, 0745, 7063}
Testing and Adjusting
Swing Bearing Movement - Measure
325B Excavator Hydraulic System
Disassembly and Assembly
Swing Gear and Bearing - Remove
325B Excavator Machine Systems
Swing Gear and Bearing - Install
325B Excavator Machine Systems
Service Magazine
The Swing Bearing In The Bearing And Gear Group Is Improved {7063,5459}
1997/12/22
The Swing Bearing In The Bearing And Gear Group Is Improved{7063,5459}
1998/04/20
Installation of the Correct Dust Seal in the Swing Gear and Bearing {7063}
2004/11/29
Installation of the Correct Dust Seal in the Swing Gear and Bearing {7063}
2003/02/24
Installation of the Correct Dust Seal in the Swing Gear and Bearing {7063}
2003/10/06
Procedure for the Measurement of the Movement of the Swing Bearing {5459, 7063}
2012/11/30
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 325B L :

GEAR & BEARING GP
114-1459 GEAR & BEARING GP
GEAR & BEARING GP
114-1459 GEAR & BEARING GP
GEAR & BEARING GP
114-1459 GEAR & BEARING GP
COUNTERWEIGHT GP
122-4041 COUNTERWEIGHT GP
COUNTERWEIGHT GP
122-4040 COUNTERWEIGHT GP
FENDER & COVER GP
146-4966 FENDER & COVER GP
FENDER & COVER GP
114-6300 FENDER & COVER GP
HANDLE GP-STORAGE DOOR
122-3877 HANDLE GP-STORAGE DOOR
FRAME GP-UPPER
128-9812 FRAME GP-UPPER
FRAME GP-UPPER
128-9812 FRAME GP-UPPER
BUMPER GP-SIDE
128-9999 BUMPER GP-SIDE
FRAME AS-UNDERCARRIAGE
110-9894 FRAME AS-UNDERCARRIAGE
IDLER GP-FRONT
115-6339 IDLER GP-FRONT
IDLER GP-FRONT
115-6340 IDLER GP-FRONT
IDLER GP-FRONT
115-3696 IDLER GP-FRONT
SPRING GP-RECOIL
130-9292 SPRING GP-RECOIL

Truck sale:

Caterpillar 325BL, Construction
29,000 
Caterpillar 325BL, Construction
- Crawler Excavators
MILTON CAT
 
 
Caterpillar 325BL, Construction
- Crawler Excavators
avspare
Caterpillar 325BL, Construction
43,400 
Caterpillar 325BL, Construction
- Crawler Excavators
N C MACHINERY CO.
Caterpillar 325BL, Construction
31,000 
Caterpillar 325BL, Construction
- Crawler Excavators
WHAYNE SUPPLY COMPANY
CATERPILLAR 325BL 1998
 
CATERPILLAR 325BL 1998
- TRACK EXCAVATORS
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.