AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1140661 MOTOR & MTG GP-SWING S/N 1GS 1-(T00.08) PART OF 1107214-Page 205 1077054-Page 253 325B L EXCAVATOR


HYDRAULIC SYSTEM
MOTOR GP

EXCAVATOR 325B L EXCAVATOR 1GS
 325B L TRACK-TYPE EXCAVATOR /HAMMER ARRANGEMENT/ 1GS00001-UP (MACHINE) POWERED BY 3116 ENGINE XEBP7640 325B L 1GS   (1996)

HYDRAULIC SYSTEM

MOTOR GP
GUARD GP-TRAVEL MOTOR
127-1429 GUARD GP-TRAVEL MOTOR
MOTOR & MTG GP-SWING
114-0661 MOTOR & MTG GP-SWING
MOTOR & MTG GP-SWING
114-0661 MOTOR & MTG GP-SWING
MOTOR GP-SWING
107-7054 MOTOR GP-SWING
MOTOR GP-SWING
107-7054 MOTOR GP-SWING
 

#XEBP76400350
 

114-0661: MOTOR & MTG GP-SWING

1140661 MOTOR & MTG GP-SWING
S/N 1GS 1-(T00.08)
PART OF 1107214-Page 205
1077054-Page 253
h50624e XEBP7640
1140661 MOTOR & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-7054 Y [1] MOTOR GP  
2. 6V-5204 [1] RING-RETAINING  
3. 9X-8257 [4] WASHER  
4. 8T-4944 [4] BOLT (L=40mm)  
5. 8T-6404 [1] SEAL-O-RING (ID=158.42mm)  
  Y   SEPARATE ILLUSTRATION
 

#XEBP76400351
 

114-0661: MOTOR & MTG GP-SWING

1140661 MOTOR & MTG GP-SWING
S/N 1GS (T00.09)-UP
PART OF 1107214-Page 205
1843829-Page 253.03
h79340e XEBP7640
1140661 MOTOR & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-3829 YR [1] MOTOR GP-PISTON  
2. 148-8353 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9001 [1] ELBOW  
3. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
4. 148-8335 [1] CONNECTOR AS  
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
5. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
6. 7Y-8109 [1] BRACKET AS  
7. 8T-4178 M [6] BOLT (M10X1.5X90-MM)  
8. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
9. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
10. 107-7056 Y [1] VALVE GP-SWING CUSHION  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#XEBP76400352
 

107-7054: MOTOR GP-SWING

1077054 MOTOR GP-SWING
S/N 1GS 1-00136
PART OF 1140661-Page 252
1211564-Page 254, 4I7788-Page 256, 1211565-Page 292
h51019e XEBP7640
1077054 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-1564 Y [1] MOTOR GP  
2. 121-1565 Y [1] VALVE GP  
3. 8T-6974 [3] BOLT (L=80mm)  
4. 095-1573 [2] SEAL-O-RING (ID=5.80mm)  
5. 4I-7788 Y [2] VALVE GP  
6. 9X-8256 [6] WASHER  
7. 5B-9304 [2] SCREW  
  Y   SEPARATE ILLUSTRATION
 

#XEBP76400353
 

107-7054: MOTOR GP-SWING

1077054 MOTOR GP-SWING
S/N 1GS 00137-00141
PART OF 1140661-Page 252
1211564-Page 254, 4I7788-Page 256, 1373637-Page 292
h56391e XEBP7640
1077054 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-1564 Y [1] MOTOR GP  
2. 137-3637 Y [1] VALVE GP  
3. 8T-6974 [3] BOLT (L=80mm)  
4. 095-1574 [2] SEAL-O-RING (ID=6.8mm)  
5. 4I-7788 Y [2] VALVE GP  
6. 9X-8256 [6] WASHER  
7. 5B-9304 [2] SCREW  
  Y   SEPARATE ILLUSTRATION
 

#XEBP76400354
 

107-7054: MOTOR GP-SWING

1077054 MOTOR GP-SWING
S/N 1GS 00142-(T00.08)
PART OF 1140661-Page 252
1211564-Page 254, 1540403-Page 256.01, 1373637-Page 292
h63465e XEBP7640
1077054 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-1564 Y [1] MOTOR GP  
2. 137-3637 Y [1] VALVE GP  
3. 8T-6974 [3] BOLT (L=80mm)  
4. 095-1574 [2] SEAL-O-RING (ID=6.8mm)  
5. 154-0403 Y [2] VALVE GP  
6. 9X-8256 [6] WASHER  
7. 5B-9304 [2] SCREW  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP76400355
 

184-3829: MOTOR GP-SWING

1843829 MOTOR GP-SWING
S/N 1GS (T00.09)-UP
PART OF 1140661-Page 252
1843834-Page 255.01, 1843830-Page 256.02, 1373637-Page 292
h79341e XEBP7640
1843829 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-3834 Y [1] MOTOR GP  
2. 137-3637 Y [1] VALVE GP  
3. 8T-6974 [3] BOLT (L=80mm)  
4. 095-1574 [2] SEAL-O-RING (ID=6.8mm)  
5. 184-3830 Y [2] VALVE GP  
6. 9X-8256 [6] WASHER  
7. 5B-9304 [2] SCREW  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP76400356
 

121-1564: MOTOR GP-SWING

1211564 MOTOR GP-SWING-PART 1 OF 2
S/N 1GS 1-(T00.08)
PART OF 1077054-Page 253
h56240e XEBP7640
1211564 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4292 [3] PLATE-FRICTION  
2. 7Y-4293 [4] PLATE  
3. 111-1116 [1] BARREL  
4. 5J-2383 J [1] SEAL-O-RING (ID=190.09mm)  
5. 7Y-4294 J [1] SEAL-O-RING (ID=209.14mm)  
6. 7Y-4290 [1] PISTON-BRAKE  
7. 123-2139 [18] SPRING  
8. 4I-5849 J [1] SEAL-O-RING (ID=199.86mm)  
9. 121-1567 [1] HEAD GP  
10. 099-8111 [2] PIN  
11. 4I-7787 [1] PLATE  
12. 110-5525 [2] PLUG  
13. 3J-1907 J [2] SEAL-O-RING (ID=11.89mm)  
14. 095-0939 [1] RING-RETAINING  
15. 4I-5850 [1] RING  
16. 7Y-4269 [1] BEARING  
17. 7Y-4252 [3] SPACER  
18. 7Y-4255 [1] SPRING  
19. 7Y-4258 [1] SPACER  
20. 7Y-4256 [12] PIN  
21. 7Y-4257 [1] SPACER  
22. 7Y-4254 [1] BUSHING  
23. 6V-5204 [2] RING-RETAINING  
24. 7Y-4270 [1] BEARING  
25. 095-1714 J [1] SEAL-O-RING (ID=99.40mm)  
26. 096-1533 J [1] SEAL  
27. 7Y-4251 [1] SHAFT  
28. 7Y-4266 [1] RETAINER  
29. 6V-5203 [1] RING-RETAINING  
30. 7Y-4261 [1] PLATE  
31. 7Y-4262 [1] PLATE  
32. 111-1115 [1] BODY  
33. 4I-6448 [1] PISTON AS  
  7Y-4259 [9] PISTON AS  
 

#XEBP76400357
 

121-1564: MOTOR GP-SWING

1211564 MOTOR GP-SWING-PART 2 OF 2
S/N 1GS 1-(T00.08)
PART OF 1077054-Page 253
h56241e XEBP7640
1211564 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4267 [2] VALVE  
2. 7Y-4268 [2] SPRING  
3. 095-1595 J [2] SEAL-O-RING (ID=27.70mm)  
4. 094-1900 [2] PLUG  
5. 7Y-5221 [4] BOLT  
6. 095-1579 J [1] SEAL-O-RING (ID=10.80mm)  
7. 7Y-4274 [1] PLUG  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  121-1577 [1] SEAL KIT  
    (INCLUDES PARTS MARKED J)
 

#XEBP76400358
 

184-3834: MOTOR GP-SWING

1843834 MOTOR GP-SWING-PART 1 OF 2
S/N 1GS (T00.09)-UP
PART OF 1843829-Page 253.03
h78558e XEBP7640
1843834 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4292 [3] PLATE-FRICTION  
2. 7Y-4293 [4] PLATE  
3. 111-1116 [1] BARREL  
4. 5J-2383 J [1] SEAL-O-RING (ID=190.09mm)  
5. 7Y-4294 J [1] SEAL-O-RING (ID=209.14mm)  
6. 184-3835 [1] PISTON-BRAKE  
7. 123-2139 [18] SPRING  
8. 4I-5849 J [1] SEAL-O-RING (ID=199.86mm)  
9. 121-1567 [1] HEAD GP  
10. 099-8111 [2] PIN  
11. 4I-7787 [1] PLATE  
12. 110-5525 [2] PLUG  
13. 3J-1907 J [2] SEAL-O-RING (ID=11.89mm)  
14. 095-0939 [1] RING-RETAINING  
15. 4I-5850 [1] RING  
16. 7Y-4269 [1] BEARING  
17. 7Y-4252 [3] SPACER  
18. 7Y-4255 [1] SPRING  
19. 7Y-4258 [1] SPACER  
20. 7Y-4256 [12] PIN  
21. 7Y-4257 [1] SPACER  
22. 7Y-4254 [1] BUSHING  
23. 6V-5204 [2] RING-RETAINING  
24. 7Y-4270 [1] BEARING  
25. 095-1714 J [1] SEAL-O-RING (ID=99.40mm)  
26. 096-1533 J [1] SEAL  
27. 7Y-4251 [1] SHAFT  
28. 7Y-4266 [1] RETAINER  
29. 6V-5203 [1] RING-RETAINING  
30. 7Y-4261 [1] PLATE  
31. 7Y-4262 [1] PLATE  
32. 111-1115 [1] BODY  
33. 4I-6448 [1] PISTON AS  
  7Y-4259 [9] PISTON AS  
 

#XEBP76400359
 

184-3834: MOTOR GP-SWING

1843834 MOTOR GP-SWING-PART 2 OF 2
S/N 1GS (T00.09)-UP
PART OF 1843829-Page 253.03
h78559e XEBP7640
1843834 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4267 [2] VALVE  
2. 7Y-4268 [2] SPRING  
3. 095-1595 J [2] SEAL-O-RING (ID=27.70mm)  
4. 094-1900 [2] PLUG  
5. 7Y-5221 [4] BOLT (L=45mm)  
6. 095-1579 J [1] SEAL-O-RING (ID=10.80mm)  
7. 7Y-4274 [1] PLUG  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  121-1577 [1] SEAL KIT  
    (INCLUDES PARTS MARKED J)
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Installation Procedure for a Separate Case Drain Line and Filter for the Swing Motor and Travel Motors{5057, 5058, 5068, 5091, 5459}
Installation Procedure for a Separate Case Drain Line and Filter for the Swing Motor and Travel Motors{5057, 5058, 5068, 5091, 5459}
The Remanufactured Swing Motor is Shipped With Plugs in the Relief Valve Ports{5058}
The Remanufactured Swing Motor is Shipped With Plugs in the Relief Valve Ports{5058}
Technical Information Bulletin
Increased Case Drain Pressure May Cause Swing Motor Failure (Reoccurence)
Increased Case Drain Pressure May Cause Swing Motor Failure (Reoccurence)
Specifications
Track Motor Lines Group
325B & 325B L EXCAVATORS HYDRAULIC SYSTEM
Travel Motor
325B & 325B L EXCAVATORS HYDRAULIC SYSTEM
Swing Motor
325B & 325B L EXCAVATORS HYDRAULIC SYSTEM
Travel Motor<BR> 107-7000
325B, 325B L, AND 325B LN EXCAVATORS ATTACHMENTS
Traction Control Valves
325B, 325B L, AND 325B LN EXCAVATORS ATTACHMENTS
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Swing Motor - Test - Measurement of Case Drain Oil
325B Excavator Hydraulic System
Travel Motor - Test - Measurement of Case Drain Oil
325B Excavator Hydraulic System
Relief Valve (Travel Motor) - Test and Adjust
325B Excavator Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Travel Motor - Remove
325B Excavator Machine Systems
Travel Motor - Install
325B Excavator Machine Systems
Travel Motor - Disassemble
325B Excavator Machine Systems
Travel Motor - Assemble
325B Excavator Machine Systems
Swing Motor - Remove
325B Excavator Machine Systems
Swing Motor - Install
325B Excavator Machine Systems
Swing Motor - Disassemble
325B Excavator Machine Systems
Swing Motor - Assemble
325B Excavator Machine Systems
Service Magazine
New Gauge Block Set Available For Rebuilding Of Hydraulic Pumps and Motors{0733,0738,0763,4351,5070,5058}
1997/07/28
Pump Control Pilot Lines Improved {5058}
1998/01/26
Travel Motor Improvements Enhance Dependability {4351,5058}
1999/03/08
Straight Travel (tracking) With the Travel Speed Control in the High Speed Position Is Improved {5058}
2001/02/26
Measure the Case Drain During Repair of the Swing Motor and the Travel Motor {4351, 5058}
2004/05/24
Procedure for the Measurement of the Movement of the Swing Bearing {5459, 7063}
2004/10/18
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27

Caterpillar Parts SIS Catalog 325B L :

VALVE GP-CUSHION CROSSOVER RLF
116-3420 VALVE GP-CUSHION CROSSOVER RLF
LINES GP-SWING MOTOR
111-6473 LINES GP-SWING MOTOR
LINES GP-RETURN & FILTER
111-6500 LINES GP-RETURN & FILTER
LINES GP-RETURN & FILTER
111-6500 LINES GP-RETURN & FILTER
LINES GP-FRONT
128-7489 LINES GP-FRONT
LINES GP-FRONT
138-5070 LINES GP-FRONT
LINES GP-FRONT
138-5070 LINES GP-FRONT
LINES GP-FRONT
138-5070 LINES GP-FRONT
MOTOR & MTG GP-SWING
114-0661 MOTOR & MTG GP-SWING
MOTOR GP-SWING
107-7054 MOTOR GP-SWING
MOTOR GP-SWING
107-7054 MOTOR GP-SWING
MOTOR GP-SWING
107-7054 MOTOR GP-SWING
MOTOR GP-SWING
184-3829 MOTOR GP-SWING
MOTOR GP-SWING
121-1564 MOTOR GP-SWING
MOTOR GP-SWING
121-1564 MOTOR GP-SWING
MOTOR GP-SWING
184-3834 MOTOR GP-SWING

Truck sale:

Caterpillar 325BL, Construction
29,000 
Caterpillar 325BL, Construction
- Crawler Excavators
MILTON CAT
 
 
Caterpillar 325BL, Construction
- Crawler Excavators
avspare
Caterpillar 325BL, Construction
43,400 
Caterpillar 325BL, Construction
- Crawler Excavators
N C MACHINERY CO.
Caterpillar 325BL, Construction
31,000 
Caterpillar 325BL, Construction
- Crawler Excavators
WHAYNE SUPPLY COMPANY
CATERPILLAR 325BL 1998
 
CATERPILLAR 325BL 1998
- TRACK EXCAVATORS
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.