1099533 ENGINE AR 322B L EXCAVATOR

Part No	Qty	Parts name
7E-2482	[1]	CYLINDER BLOCK GP
134-2355	[1]	COVER GP (CYLINDER BLOCK)
4W-2197	[1]	CRANKSHAFT GP
115-4203	[1]	SEAL GP (CRANKSHAFT)
107-7639	[6]	PISTON & ROD GP
108-5759	[1]	CAMSHAFT GP
4P-8264	[1]	CYLINDER HEAD GP
2W-9607	[1]	VALVE MECHANISM GP
9Y-7620	[1]	COVER GP (VALVE MECHANISM)
4W-2515	[1]	LIFTING GP (ENGINE)
101-4539	[1]	HOUSING GP (FRONT)
101-4540	[1]	GEAR GP (FRONT)
6I-0772	[1]	DAMPER & PULLEY GP
4W-5429	[1]	PULLEY GP (CRANKSHAFT)
7L-0004	[1]	COVER GP (FRONT HOUSING)
7W-8813	[1]	HOUSING GP (FLYWHEEL)

#XEBP76490003

120-4814: ENGINE AR

ENGINE AR

1204814 ENGINE AR-PART 2 OF 3
PART OF 1099533-Page 11

XEBP76490003 XEBP7649

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
134-2354	[1]	PAN GP (OIL)
136-8877	[1]	DRAIN GP (OIL PAN)
4W-3462	[1]	CARRIER GP (SEAL)
9Y-6092	[1]	FLYWHEEL GP
4W-5428	[1]	DRIVE GP (WATER PUMP)
7C-0044	[1]	DRIVE GP (FAN)
4P-7081	[1]	PULLEY GP (FAN & ALT DRIVE)
6I-1546	[1]	FUMES DISPOSAL GP
4W-2195	[1]	PUMP GP (ENGINE OIL)
125-1312	[1]	GAUGE GP (OIL LEVEL) (DIPSTICK)
4W-2914	[1]	LINES GP (ENGINE OIL)
129-0494	[1]	FILTER GP (ENGINE OIL)
131-4810	[1]	BREATHER GP
7C-2476	[1]	LINES GP (TURBOCHARGER OIL)
4W-7589	[1]	PUMP GP (WATER)
6I-3186	[1]	LINES GP (WATER)
115-6951	[1]	COOLER GP (ENGINE OIL)

#XEBP76490004

120-4814: ENGINE AR

ENGINE AR

1204814 ENGINE AR-PART 3 OF 3
PART OF 1099533-Page 11

XEBP76490004 XEBP7649

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4W-3480	[1]	MANIFOLD GP (INLET)
134-2357	[1]	AFTERCOOLER GP (TREATED WATER)
133-5048	[1]	LINES GP (AIR)
6I-2298	[1]	MANIFOLD GP (EXHAUST)
115-4068	[1]	TURBOCHARGER GP
130-1105	[1]	LINES GP (FUEL FILTER)
107-7732	[6]	PUMP GP (FUEL INJECTION)
123-2381	[1]	SUPPORT GP (GOVERNOR CONTROL)
129-3230	[1]	PUMP GP (FUEL PRM & PRIM FILTER)
115-4177	[1]	GOVERNOR GP (UNIT INJECTOR)
105-1695	[1]	CONTROL GP (FUEL INJECTION)
4P-9693	[1]	LINES GP (FUEL RATIO CONTROL)
124-0643	[1]	ALTERNATOR GP (CHARGING)
118-5537	[1]	SENSOR GP (ENGINE)
7C-4028	[1]	SOLENOID GP (SHUTOFF)
134-2356	[1]	HEATER GP (AIR INLET)

#XEBP76490005

7E-2482: CYLINDER BLOCK GP

CYLINDER BLOCK GP

7E2482 CYLINDER BLOCK GP
PART OF 1204814-Page 12
1004948-Page 16

h50478e XEBP7649

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-4948 Y	[1]	CYLINDER BLOCK GP
2.	6V-3940	[6]	BOLT (L=25mm)
3.	1W-8407	[2]	SLEEVE
4.	6V-3538	[2]	DOWEL
5.	4P-5651	[6]	TUBE AS
6.	7N-5683	[2]	DOWEL
	Y		SEPARATE ILLUSTRATION

#XEBP76490006

100-4948: CYLINDER BLOCK GP

CYLINDER BLOCK GP

1004948 CYLINDER BLOCK GP
PART OF 7E2482-Page 15

h50479e XEBP7649

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2M-6471	[2]	PLUG
2.	7E-7968	[7]	CAP
3.	9X-8916	[14]	BOLT (L=140mm)
4.	5P-8247	[14]	WASHER
5.	9S-8005	[1]	PLUG
6.	3K-0360	[1]	SEAL
7.	2W-7213	[6]	BEARING
8.	3D-2824	[2]	SEAL
9.	9S-8008	[2]	PLUG
10.	8T-0293	[2]	BOLT (L=20mm)
11.	6F-7062	[2]	WASHER
12.	3H-5552	[1]	PLUG
13.	9S-8006	[1]	PLUG
14.	2M-9780	[1]	SEAL
15.	2W-7211	[1]	BEARING

#XEBP76490007

134-2355: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

1342355 COVER GP-CYLINDER BLOCK
PART OF 1204814-Page 12

h83114e XEBP7649

1342355 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-3871	[3]	COVER
2.	6V-2317	[10]	BOLT (L=30mm)
3.	9M-1974	[21]	WASHER
4.	2W-6544	[1]	COVER
5.	4P-9128	[1]	ADAPTER
6.	6V-5217	[14]	BOLT (L=20mm)
7.	7W-9699	[3]	GASKET
8.	7W-3872	[6]	SLEEVE
9.	7W-2426	[1]	GASKET
10.	6V-5842	[2]	BOLT (L=40mm)
11.	9S-4191	[1]	PLUG
12.	3J-1907	[1]	SEAL-O-RING (ID=11.89mm)
13.	4F-9653	[1]	SEAL-O-RING (ID=46.99mm)

#XEBP76490008

136-8877: DRAIN GP-OIL PAN

DRAIN GP-OIL PAN

1368877 DRAIN GP-OIL PAN
PART OF 1204814-Page 12

h83132e XEBP7649

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	3K-0360	[1]	SEAL-O-RING (ID=16.36mm)
2.	6V-7238	[1]	VALVE

#XEBP76490009

4W-3462: CARRIER GP-SEAL

CARRIER GP-SEAL

4W3462 CARRIER GP-SEAL
PART OF 1204814-Page 12

h83780e XEBP7649

For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-3940	[8]	BOLT (L=25mm)
2.	9M-1974	[8]	WASHER
3.	2W-6546	[1]	COVER
4.	1U-8846 B		GASKET MAKER
5.	6V-3538	[2]	DOWEL
	B		USE AS REQUIRED

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}
Recommended Storage Procedures For Hydraulic Excavators {0355, 1000, 1250, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Service Letter-NACD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}
Reuse and Salvage for Mechanical Governor Groups in 3114, 3116, and 3126 Engines Equipped with Mechanical Unit Injectors (MUI) {0374, 1000, 1050, 1250, 1300}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Information Release Memo

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Excavator {0372, 1000, 7000, 753T, 7565}

Disassembly and Assembly

Introduction
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE

Shutoff Solenoid
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE

Engine & Main Hydraulic Pump
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

Analyzing A Major Engine Failure{1000}
1982/07/19

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15

Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 322B L :

120-4814 ENGINE AR

7E-2482 CYLINDER BLOCK GP

100-4948 CYLINDER BLOCK GP

134-2355 COVER GP-CYLINDER BLOCK

136-8877 DRAIN GP-OIL PAN

4W-3462 CARRIER GP-SEAL

Truck sale:

59,500

Caterpillar 322BL, Construction
- Crawler Excavators
RING POWER CORP.

35,000

Caterpillar 322BL, Construction
- Crawler Excavators
MICHIGAN CAT

45,000

Caterpillar 322BL, Construction
- Crawler Excavators
WAGNER EQUIPMENT CO

42,500

Caterpillar 322BL, Construction
- Crawler Excavators
WAGNER EQUIPMENT CO

34,000

Caterpillar 322BL, Construction
- Crawler Excavators
TRACTOR & EQUIPMENT CO.