AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W4812 FASTENER GP-GOVERNOR PART OF 1154177-Page 66 322B L EXCAVATOR


FUEL SYSTEM
GOVERNOR GP
FILTER GP-FUEL
CONTROL GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
LINES GP-FUEL

EXCAVATOR 322B L EXCAVATOR 1AS
 322B L TRACK-TYPE EXCAVATOR /HAMMER ARRANGEMENT/ 1AS00001-UP (MACHINE) POWERED BY 3116 ENGINE XEBP7649 322B L 1AS   (1996)

FUEL SYSTEM

GOVERNOR GP
115-4177 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
115-3576 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
6I-4267 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
6I-4267 GOVERNOR GP-UNIT INJECTOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
SUPPORT GP-GOVERNOR CONTROL
123-2381 SUPPORT GP-GOVERNOR CONTROL
 

#XEBP76490070
 

7W-4812: FASTENER GP-GOVERNOR

7W4812 FASTENER GP-GOVERNOR
PART OF 1154177-Page 66
h50529e XEBP7649
7W4812 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 [1] SLEEVE  
2. 9M-1974 [3] WASHER  
3. 6V-5218 [3] BOLT (L=35mm)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL (ID=31.34mm)  
6. 7C-3839 [1] CLIP  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL (ID=107.62mm)  
 

#XEBP76490071
 

7W-8434: LINES GP-GOVERNOR OIL

7W8434 LINES GP-GOVERNOR OIL
PART OF 1154177-Page 66
h51492e XEBP7649
7W8434 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8628 [1] ELBOW  
2. 7W-0367 [1] TUBE AS  
3. 6V-8647 [1] CONNECTOR  
4. 3J-7354 [2] SEAL (ID=8.92mm)  
5. 4J-5477 [2] SEAL (ID=7.65mm)  
 

#XEBP76490072
 

123-2381: SUPPORT GP-GOVERNOR CONTROL

1232381 SUPPORT GP-GOVERNOR CONTROL
PART OF 1204814-Page 14
h50531e XEBP7649
1232381 SUPPORT GP-GOVERNOR CONTROL Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-0614 [1] BRACKET AS  
2. 102-7966 [1] SUPPORT  
  8T-3612 [1] NUT  
3. 6V-5219 [2] BOLT (L=40mm)  
4. 9M-1974 [4] WASHER  
5. 6V-9804 [2] BOLT  
6. 8T-6912 [2] BOLT (L=50mm)  
7. 8T-4224 [2] WASHER  
 

#XEBP76490073
 

129-3230: PUMP GP-FUEL PRM & PRIM FILTER

1293230 PUMP GP-FUEL PRM & PRIM FILTER-PART 1 OF 2
PART OF 1204814-Page 14
h51647e XEBP7649
1293230 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2605 [1] PUMP AS  
  7E-5346 [2] VALVE AS  
2. 9Y-1760 [1] BRACKET  
3. 1P-0436 [1] GASKET  
4. 8T-7547 [1] BOLT (L=30mm)  
5. 8T-4224 [1] WASHER  
6. 8T-4971 [1] BOLT (L=30mm)  
7. 9X-8256 [1] WASHER  
8. 7X-2537 [1] BOLT (L=35mm)  
9. 8T-4183 [1] BOLT (L=40mm)  
10. 113-0454 [1] HOSE AS  
11. 6V-8724 [1] ELBOW  
12. 3J-1907 [1] SEAL (ID=11.89mm)  
13. 6V-8397 [1] SEAL (ID=9.25mm)  
14. 8T-4121 [2] WASHER  
15. 8T-4195 [2] BOLT (L=30mm)  
16. 129-3231 [1] BRACKET AS  
 

#XEBP76490074
 

129-3230: PUMP GP-FUEL PRM & PRIM FILTER

1293230 PUMP GP-FUEL PRM & PRIM FILTER-PART 2 OF 2
PART OF 1204814-Page 14
h51648e XEBP7649
1293230 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-1907 [3] SEAL (ID=11.89mm)  
2. 6V-8636 [1] CONNECTOR  
3. 6V-8397 [1] SEAL (ID=9.25mm)  
4. 8T-0151 [1] ADAPTER  
5. 5P-4924 [1] ELBOW  
 

#XEBP76490075
 

105-1695: CONTROL GP-FUEL INJECTION

1051695 CONTROL GP-FUEL INJECTION
PART OF 1204814-Page 14
h50532e XEBP7649
1051695 CONTROL GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-7459 [1] CONTROL AS  
2. 6V-5683 [4] BOLT (L=16mm)  
 

#XEBP76490076
 

107-7732: PUMP GP-FUEL INJECTION

1077732 PUMP GP-FUEL INJECTION
PART OF 1204814-Page 14
1278216-Page 79
h54129e XEBP7649
1077732 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-8216 Y [1] INJECTOR GP  
2. 8T-8442 [1] BOLT (L=30mm)  
3. 9X-8267 [1] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#XEBP76490077
 

127-8216: INJECTOR GP-FUEL

1278216 INJECTOR GP-FUEL
PART OF 1077732-Page 79
h55582e XEBP7649
1278216 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-8718 [1] SEAL  
2. 125-8274 [1] SEAL  
 

#XEBP76490078
 

130-1105: LINES GP-FUEL FILTER

1301105 LINES GP-FUEL FILTER-PART 1 OF 2
PART OF 1204814-Page 14
1291102-Page 82
h55850e XEBP7649
1301105 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-2147 [1] TUBE AS  
2. 6V-8397 [3] SEAL (ID=9.25mm)  
3. 6V-8636 [2] CONNECTOR  
4. 3J-1907 [3] SEAL (ID=11.89mm)  
5. 1R-0751 [1] FUEL FILTER AS  
6. 6V-8724 [1] ELBOW[90DEGREES 9/16)  
7. 129-2145 [1] TUBE AS  
8. 129-1102 Y [1] BASE GP  
9. 103-2529 E HOSE (190cm)  
10. 096-0061 [1] STRAP  
11. 129-2146 [1] TUBE AS  
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#XEBP76490079
 

130-1105: LINES GP-FUEL FILTER

1301105 LINES GP-FUEL FILTER-PART 2 OF 2
PART OF 1204814-Page 14
h55851e XEBP7649
1301105 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 322B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-7054 [1] SEAL (ID=18.64mm)  
2. 8T-7547 [2] BOLT (L=30mm)  
3. 4P-9696 [1] TUBE AS  
4. 9W-4216 [1] SPACER  
5. 9S-1350 [1] CLIP  
6. 8T-4224 [4] WASHER  
7. 8T-4189 [4] BOLT (L=20mm)  
8. 5C-2890 [1] NUT  
9. 9X-8256 [2] WASHER  
10. 8T-4971 [1] BOLT (L=30mm)  
11. 5M-5689 [2] CLIP  
12. 7E-5189 [1] VALVE  
13. 5P-7813 [1] SEAL (ID=7.65mm)  
14. 3N-3252 [1] SPRING  
15. 8T-0151 [1] ADAPTER  
16. 3J-1907 [10] SEAL (ID=11.89mm)  
17. 6V-9850 [1] ELBOW (90 degrees 11/16)  
18. 6V-8397 [3] SEAL (ID=9.25mm)  
19. 7X-2459 [2] TEE  
20. 5P-1046 [1] CONNECTOR  
21. 6V-6317 [2] BOLT (L=20mm)  
22. 6V-5839 [2] WASHER  
23. 1P-1670 [1] PLUG  
24. 095-1388 [2] CLAMP  
25. 129-1100 [2] VALVE  
26. 119-2986 [1] COVER  
27. 3P-0651 [1] SEAL (ID=59.69mm)  
28. 9S-4191 [3] PLUG (9/16)  
29. 8T-4121 [6] WASHER  
30. 8T-4195 [4] BOLT (L=30mm)  
31. 129-1672 [1] BRACKET  
32. 8T-4137 [2] BOLT (L=20mm)  
 

Information:

Operation and Maintenance Manual
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
322B, 322B L, 325B and 325B L Excavators
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-Australia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-CFEL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-CSARL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-Americas
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-Brazil
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Incorrect Troubleshooting Results In Replacement Of Governor Actuators Which Are Functioning Correctly
Incorrect Troubleshooting Results In Replacement Of Governor Actuators Which Are Functioning Correctly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Tool Operating Manual
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Service Letter-Asia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
1060070 Governor Spring Breakage
1060070 Governor Spring Breakage
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Disassembly and Assembly
Auxiliary Fuel Refueling Pump
SUPPLEMENT FOR 322B & 322B L EXCAVATORS - 3116 ENGINE
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Correction to Systems Operation, Testing and Adjusting , "Calibrate Governor Actuator" {1716}
2000/09/04

Caterpillar Parts SIS Catalog 322B L :

CONTROL AS-FUEL RATIO
4P-5746 CONTROL AS-FUEL RATIO
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP-UNIT INJECTOR
6I-4267 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
6I-4267 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
115-3576 GOVERNOR GP-UNIT INJECTOR
115-4177 GOVERNOR GP-UNIT INJECTOR
LINES GP-AIR
109-9535 LINES GP-AIR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
SUPPORT GP-GOVERNOR CONTROL
123-2381 SUPPORT GP-GOVERNOR CONTROL
PUMP GP-FUEL PRM & PRIM FILTER
129-3230 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
129-3230 PUMP GP-FUEL PRM & PRIM FILTER
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
127-8216 INJECTOR GP-FUEL
LINES GP-FUEL FILTER
130-1105 LINES GP-FUEL FILTER

Truck sale:

 
59,500 
Caterpillar 322BL, Construction
- Crawler Excavators
RING POWER CORP.
 
35,000 
Caterpillar 322BL, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 322BL, Construction
45,000 
Caterpillar 322BL, Construction
- Crawler Excavators
WAGNER EQUIPMENT CO
Caterpillar 322BL, Construction
42,500 
Caterpillar 322BL, Construction
- Crawler Excavators
WAGNER EQUIPMENT CO
Caterpillar 322BL, Construction
34,000 
Caterpillar 322BL, Construction
- Crawler Excavators
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.