AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1141437 FINAL DRIVE GP (PART 1 OF 2) 2 REQUIRED S/N 9GR 1-00381, 8JR 1-00799 312B EXCAVATOR


POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 312B EXCAVATOR 2NS
 312B & 312B L TRACK-TYPE EXCAVATORS 2NS00001-UP (MACHINE) POWERED BY 3064 ENGINE XEBP7665 312B 2NS   (1996)

POWER TRAIN

DRIVE GP-FINAL
FASTENER GP
4I-7334 FASTENER GP
FINAL DRIVE GP
114-1437 FINAL DRIVE GP
FINAL DRIVE GP
114-1437 FINAL DRIVE GP
FINAL DRIVE GP
151-9686 FINAL DRIVE GP
FINAL DRIVE GP
151-9686 FINAL DRIVE GP
 

#XEBP76650180
 

114-1437: FINAL DRIVE GP

1141437 FINAL DRIVE GP (PART 1 OF 2)
2 REQUIRED
S/N 9GR 1-00381, 8JR 1-00799
h52586e XEBP7665
1141437 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6780 [1] PISTON AS  
2. 7I-1085 [1] RETAINER  
3. 1R-5875 [3] PIN  
4. 095-7383 [1] SEAL-O-RING (ID=174.00mm)  
5. 095-7386 [1] RING-BACK UP  
6. 095-1578 [1] SEAL-O-RING (ID=9.80mm)  
7. 129-8027 [1] COVER AS  
8. 7I-1103 [1] PLATE  
9. 095-1575 [2] SEAL-O-RING (ID=7.80mm)  
10. 1R-5891 [2] PIN  
11. 7I-1109 [2] PLATE  
12. 1R-5870 [1] BEARING  
13. 7Y-4277 [1] SEAL-O-RING (ID=202.79mm)  
14. 096-1519 [1] SEAT  
15. 095-7380 [1] SPRING  
16. 1R-5880 [2] PLATE  
17. 7I-1123 [1] SHAFT  
18. 7I-1125 [1] BEARING  
19. 1R-5889 [1] PLUG  
20. 095-1517 [1] SEAL-O-RING (ID=13.80mm)  
21. 7I-1129 [1] STOPPER  
22. 096-3978 [1] SPRING  
23. 7I-1131 [1] SPOOL  
24. 129-8028 [2] VALVE GP  
25. 095-1594 [2] SEAL-O-RING (ID=25.70mm)  
26. 095-1789 [2] RING-BACK UP  
27. 6V-8399 [1] SEAL-O-RING (ID=17.17mm)  
28. 9S-8005 [1] PLUG  
29. 133-6753 [1] SPOOL AS  
30. 7I-1137 [2] WASHER  
31. 7I-1138 [2] SPRING  
32. 5P-2568 [2] SEAL-O-RING (ID=44.12mm)  
33. 6V-8200 [8] BOLT (L=35mm)  
34. 7I-1141 [2] COVER  
35. 114-8229 [2] ORIFICE  
 

#XEBP76650181
 

114-1437: FINAL DRIVE GP

1141437 FINAL DRIVE GP (PART 2 OF 2)
2 REQUIRED
S/N 9GR 1-00381, 8JR 1-00799
1141466-Page 118
h52587e XEBP7665
1141437 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1466 Y [1] DRIVE GP  
2. 1R-5871 [1] SEAL-OIL  
3. 7I-1082 [1] SPRING  
4. 7I-1084 [1] PLATE  
5. 129-8025 [1] BARREL  
6. 129-8026 [1] PISTON-BRAKE  
7. 096-4377 [1] SEAL-O-RING (ID=190.00mm)  
8. 1R-5883 [1] RING-BACK UP  
9. 096-1521 B [1] SHIM (T=1.0mm)  
  096-3785 B [1] SHIM (T=1.2mm)  
  096-3786 B [1] SHIM (T=1.4mm)  
  096-3787 B [1] SHIM (T=1.6mm)  
  096-3788 B [1] SHIM (T=1.8mm)  
  096-1522 B [1] SHIM (T=2.0mm)  
10. 095-0687 [10] BOLT (L=45mm)  
11. 8T-6759 [10] PLUG  
12. 1R-5881 [2] SPRING  
13. 7I-1104 [2] PLUG  
14. 3Y-9267 [2] BALL  
15. 4I-9426 [1] RING-RETAINING  
16. 7I-1110 [1] SPRING  
17. 095-0882 [1] PIN-SPRING  
18. 095-1585 [1] SEAL-O-RING (ID=17.80mm)  
19. 095-7381 [1] VALVE  
20. 095-7382 [1] RETAINER  
21. 1R-5879 [2] PLATE-FRICTION  
22. 7I-1121 [1] PISTON AS  
23. 7I-1122 [1] GUIDE  
24. 1R-5874 [2] BALL  
25. 096-1445 [1] PLUG  
26. 095-0966 [2] PLUG  
27. 114-8231 [4] SCREW  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP76650182
 

151-9686: FINAL DRIVE GP

1519686 FINAL DRIVE GP (PART 1 OF 2)
2 REQUIRED
S/N 9GR 00382-UP, 8JR 00800-UP
h72444e XEBP7665
1519686 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6780 [1] PISTON AS  
2. 7I-1085 [1] RETAINER  
3. 1R-5875 [3] PIN  
4. 095-7383 J [1] SEAL-O-RING (ID=174.00mm)  
5. 095-7386 J [1] RING  
6. 095-1578 J [1] SEAL-O-RING (ID=9.80mm)  
7. 151-9685 [1] COVER AS  
8. 7I-1103 [1] PLATE  
9. 095-1575 J [2] SEAL-O-RING (ID=7.80mm)  
10. 1R-5891 [2] PIN  
11. 7I-1109 [2] PLATE  
12. 1R-5870 [1] BEARING  
13. 7Y-4277 J [1] SEAL-O-RING (ID=202.79mm)  
14. 096-1519 [1] SEAT  
15. 095-7380 [1] SPRING  
16. 1R-5880 [2] PLATE  
17. 7I-1123 [1] SHAFT  
18. 7I-1125 [1] BEARING  
19. 1R-5889 [1] PLUG  
20. 095-1517 J [1] SEAL-O-RING (ID=13.80mm)  
21. 7I-1129 [1] STOPPER  
22. 096-3978 [1] SPRING  
23. 7I-1131 [1] SPOOL  
24. 129-8028 [2] VALVE GP  
25. 095-1594 [2] SEAL-O-RING (ID=25.70mm)  
26. 095-1789 [2] RING  
27. 6V-8399 J [1] SEAL-O-RING (ID=17.17mm)  
28. 9S-8005 [1] PLUG  
29. 133-6753 [1] SPOOL AS  
30. 7I-1137 [2] WASHER  
31. 7I-1138 [2] SPRING  
32. 5P-2568 J [2] SEAL-O-RING (ID=44.12mm)  
33. 6V-8200 [8] BOLT (L=35mm)  
34. 7I-1141 [2] COVER  
35. 114-8229 [4] ORIFICE  
    THE FOLLOWING SERVICE REPAIR IS AVAILABLE:
  169-7935 [1] SPOOL AS  
 

#XEBP76650183
 

151-9686: FINAL DRIVE GP

1519686 FINAL DRIVE GP (PART 2 OF 2)
2 REQUIRED
S/N 9GR 00382-UP, 8JR 00800-UP
1141466-Page 118
h72445e XEBP7665
1519686 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1466 Y [1] DRIVE GP  
2. 1R-5871 J [1] SEAL  
3. 7I-1082 [1] SPRING  
4. 7I-1084 [1] PLATE  
5. 129-8025 [1] BARREL  
6. 129-8026 [1] PISTON  
7. 096-4377 J [1] SEAL-O-RING (ID=190.00mm)  
8. 1R-5883 J [1] RING  
9. 095-1521 B [1] SHIM (T=1.00mm)  
  096-3785 B [1] SHIM (T=1.20mm)  
  096-3786 B [1] SHIM (T=1.40mm)  
  096-3787 B [1] SHIM (T=1.60mm)  
  096-3788 B [1] SHIM (T=1.80mm)  
  096-1522 B [1] SHIM (T=2.00mm)  
10. 095-0687 [10] BOLT (L=45mm)  
11. 8T-6759 [10] PLUG  
12. 1R-5881 [2] SPRING  
13. 7I-1104 [2] PLUG  
14. 3Y-9267 [2] BALL  
15. 4I-9426 [1] RING  
16. 7I-1110 [1] SPRING  
17. 095-0882 [1] PIN  
18. 095-1585 J [1] SEAL-O-RING (ID=17.80mm)  
19. 095-7381 [1] VALVE  
20. 095-7382 [1] RETAINER  
21. 1R-5879 [2] PLATE  
2. 7I-1121 [1] PISTON AS  
23. 7I-1122 [1] GUIDE  
24. 1R-5874 [2] BALL  
25. 096-1445 [1] PLUG  
26. 095-0966 [2] PLUG  
27. 114-8231 [4] SCREW  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  7I-1277 [1] SEAL KIT (INCLUDES PARTS MARKED J)  
  B   USE AS REQUIRED
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP76650184
 

114-1511: FINAL DRIVE GP

1141511 FINAL DRIVE GP (PART 1 OF 2)
2 REQUIRED
S/N 2NS 1-00148, 3FS 1-00237
h52588e XEBP7665
1141511 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-8228 [1] PISTON AS  
2. 7I-1085 [1] RETAINER  
3. 1R-5875 [3] PIN  
4. 095-7383 [1] SEAL-O-RING (ID=174.00mm)  
5. 095-7386 [1] RING-BACK UP  
6. 095-1578 [1] SEAL-O-RING (ID=9.80mm)  
7. 129-8027 [1] COVER AS  
8. 7I-1103 [1] PLATE  
9. 095-1575 [2] SEAL-O-RING (ID=7.80mm)  
10. 1R-5891 [2] PIN  
11. 7I-1109 [2] PLATE  
12. 1R-5870 [1] BEARING  
13. 7Y-4277 [1] SEAL-O-RING (ID=202.79mm)  
14. 096-1519 [1] SEAT  
15. 095-7380 [1] SPRING  
16. 1R-5880 [2] PLATE  
17. 7I-1123 [1] SHAFT  
18. 133-6752 [1] BEARING  
19. 1R-5889 [1] PLUG  
20. 095-1517 [1] SEAL-O-RING (ID=13.80mm)  
21. 7I-1129 [1] STOPPER  
22. 096-3978 [1] SPRING  
23. 7I-1131 [1] SPOOL  
24. 129-8028 [2] VALVE GP  
25. 095-1594 [2] SEAL-O-RING (ID=25.70mm)  
26. 095-1789 [2] RING-BACK UP  
27. 6V-8399 [1] SEAL-O-RING (ID=17.17mm)  
28. 9S-8005 [1] PLUG  
29. 133-6753 [1] SPOOL AS  
30. 7I-1137 [2] WASHER  
31. 7I-1138 [2] SPRING  
32. 5P-2568 [2] SEAL-O-RING (ID=44.12mm)  
33. 6V-8200 [8] BOLT (L=35mm)  
34. 7I-1141 [2] COVER  
35. 114-8229 [2] ORIFICE  
 

#XEBP76650185
 

114-1511: FINAL DRIVE GP

1141511 FINAL DRIVE GP (PART 2 OF 2)
2 REQUIRED
S/N 2NS 1-00148, 3FS 1-00237
1141512-Page 119
h52589e XEBP7665
1141511 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1512 Y [1] DRIVE GP  
2. 1R-5871 [1] SEAL-OIL  
3. 7I-1082 [1] SPRING  
4. 7I-1084 [1] PLATE  
5. 129-8025 [1] BARREL  
6. 129-8026 [1] PISTON-BRAKE  
7. 096-4377 [1] SEAL-O-RING (ID=190.00mm)  
8. 1R-5883 [1] RING-BACK UP  
9. 096-1521 B [1] SHIM (T=1.0mm)  
  096-3785 B [1] SHIM (T=1.2mm)  
  096-3786 B [1] SHIM (T=1.4mm)  
  096-3787 B [1] SHIM (T=1.6mm)  
  096-3788 B [1] SHIM (T=1.8mm)  
  096-1522 B [1] SHIM (T=2.0mm)  
10. 095-0687 [10] BOLT (L=45mm)  
11. 8T-6759 [10] PLUG  
12. 1R-5881 [2] SPRING  
13. 7I-1104 [2] PLUG  
14. 3Y-9267 [2] BALL  
15. 4I-9426 [1] RING-RETAINING  
16. 7I-1110 [1] SPRING  
17. 095-0882 [1] PIN-SPRING  
18. 095-1585 [1] SEAL-O-RING (ID=17.80mm)  
19. 095-7381 [1] VALVE  
20. 095-7382 [1] RETAINER  
21. 1R-5879 [2] PLATE-FRICTION  
22. 7I-1121 [1] PISTON AS  
23. 7I-1122 [1] GUIDE  
24. 1R-5874 [2] BALL  
25. 096-1445 [1] PLUG  
26. 095-0966 [2] PLUG  
27. 114-8231 [4] SCREW  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#XEBP76650186
 

151-9688: FINAL DRIVE GP

1519688 FINAL DRIVE GP (PART 1 OF 2)
2 REQUIRED
S/N 2NS 00149-UP, 3FS 00238-UP
h72446e XEBP7665
1519688 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6780 [1] PISTON AS  
2. 7I-1085 [1] RETAINER  
3. 1R-5875 [3] PIN  
4. 095-7383 J [1] SEAL-O-RING (ID=174.00mm)  
5. 095-7386 J [1] RING  
6. 095-1578 J [1] SEAL-O-RING (ID=9.80mm)  
7. 151-9685 [1] COVER AS  
8. 7I-1103 [1] PLATE  
9. 095-1575 J [2] SEAL-O-RING (ID=7.80mm)  
10. 1R-5891 [2] PIN  
11. 7I-1109 [2] PLATE  
12. 1R-5870 [1] BEARING  
13. 7Y-4277 J [1] SEAL-O-RING (ID=202.79mm)  
14. 096-1519 [1] SEAT  
15. 095-7380 [1] SPRING  
16. 1R-5880 [2] PLATE  
17. 7I-1123 [1] SHAFT  
18. 133-6752 [1] BEARING  
19. 1R-5889 [1] PLUG  
20. 095-1517 J [1] SEAL-O-RING (ID=13.80mm)  
21. 7I-1129 [1] STOPPER  
22. 096-3978 [1] SPRING  
23. 7I-1131 [1] SPOOL  
24. 129-8028 [2] VALVE GP  
25. 095-1594 [2] SEAL-O-RING (ID=25.70mm)  
26. 095-1789 [2] RING  
27. 6V-8399 J [1] SEAL-O-RING (ID=17.17mm)  
28. 9S-8005 [1] PLUG  
29. 133-6753 [1] SPOOL AS  
30. 7I-1137 [2] WASHER  
31. 7I-1138 [2] SPRING  
32. 5P-2568 J [2] SEAL-O-RING (ID=44.12mm)  
33. 6V-8200 [8] BOLT (L=35mm)  
34. 7I-1141 [2] COVER  
35. 114-8229 [4] ORIFICE  
    THE FOLLOWING SERVICE REPAIR IS AVAILABLE:
  169-7935 [1] SPOOL AS  
 

#XEBP76650187
 

151-9688: FINAL DRIVE GP

1519688 FINAL DRIVE GP (PART 2 OF 2)
2 REQUIRED
S/N 2NS 00149-UP, 3FS 00238-UP
1141512-Page 119
h72447e XEBP7665
1519688 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-1512 Y [1] DRIVE GP  
2. 1R-5871 J [1] SEAL  
3. 7I-1082 [1] SPRING  
4. 7I-1084 [1] PLATE  
5. 129-8025 [1] BARREL  
6. 129-8026 [1] PISTON  
7. 096-4377 J [1] SEAL-O-RING (ID=190.00mm)  
8. 1R-5883 J [1] RING  
9. 095-1521 B [1] SHIM (T=1.00mm)  
  096-3785 B [1] SHIM (T=1.20mm)  
  096-3786 B [1] SHIM (T=1.40mm)  
  096-3787 B [1] SHIM (T=1.60mm)  
  096-3788 B [1] SHIM (T=1.80mm)  
  096-1522 B [1] SHIM (T=2.00mm)  
10. 095-0687 [10] BOLT (L=45mm)  
11. 8T-6759 [10] PLUG  
12. 1R-5881 [2] SPRING  
13. 7I-1104 [2] PLUG  
14. 3Y-9267 [2] BALL  
15. 4I-9426 [1] RING  
16. 7I-1110 [1] SPRING  
17. 095-0882 [1] PIN  
18. 095-1585 J [1] SEAL-O-RING (ID=17.80mm)  
19. 095-7381 [1] VALVE  
20. 095-7382 [1] RETAINER  
21. 1R-5879 [2] PLATE  
2. 7I-1121 [1] PISTON AS  
23. 7I-1122 [1] GUIDE  
24. 1R-5874 [2] BALL  
25. 096-1445 [1] PLUG  
26. 095-0966 [2] PLUG  
27. 114-8231 [4] SCREW  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  7I-1277 [1] SEAL KIT (INCLUDES PARTS MARKED J)  
  B   USE AS REQUIRED
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP76650188
 

114-1466: FINAL DRIVE GP

1141466 FINAL DRIVE GP
S/N 9GR 1-UP, 8JR 1-UP
PART OF 1141437-Page 111, 1519686-Page 113
h51787e XEBP7665
1141466 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5A-3604 [16] BOLT (L=25mm)  
2. 3B-4505 [16] LOCKWASHER  
3. 114-1467 [1] HOUSING  
4. 1R-5839 [1] NUT  
5. 1R-5838 [2] BEARING  
6. 127-5834 [1] SEAL GP  
7. 114-1470 [1] HOUSING  
8. 5I-4898 [1] DOWEL  
9. 5I-4897 [1] WASHER  
10. 6I-6530 [4] PLATE  
11. 1R-5846 [4] GEAR  
12. 1R-5848 [4] BEARING  
13. 1R-5847 [4] RACE  
14. 1R-5844 [1] CARRIER  
15. 1R-5842 [3] GEAR  
16. 1R-5843 [3] BEARING  
17. 114-1468 [1] COVER  
18. 114-1471 [2] PLUG  
19. 095-1525 [2] SEAL-O-RING  
20. 1R-5854 [8] SCREW  
21. 1R-5852 [1] PLATE  
22. 1R-5851 [1] PLATE  
23. 1R-5850 [1] PLATE  
24. 6I-6544 [1] GEAR  
25. 1R-5845 [1] GEAR  
26. 1R-5849 [1] RING-RETAINING  
27. 1U-8846 B GASKET MAKER (10ml)  
  B   USE AS REQUIRED
 

#XEBP76650189
 

114-1512: FINAL DRIVE GP

1141512 FINAL DRIVE GP
S/N 2NS 1-UP, 3FS 1-UP
PART OF 1141511-Page 115, 1519688-Page 117
h52155e XEBP7665
1141512 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 312B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5A-3604 [16] BOLT (L=25mm)  
2. 3B-4505 [16] LOCKWASHER  
3. 114-1525 [1] HOUSING  
4. 1R-5839 [1] NUT  
5. 1R-5838 [2] BEARING  
6. 127-5834 [1] SEAL GP  
7. 114-1470 [1] HOUSING  
8. 5I-4898 [1] DOWEL  
9. 5I-4897 [1] WASHER  
10. 6I-6530 [4] PLATE  
11. 1R-5846 [4] GEAR  
12. 1R-5848 [4] BEARING  
13. 1R-5847 [4] RACE  
14. 114-1524 [1] CARRIER  
15. 114-1523 [3] GEAR  
16. 114-1526 [3] BEARING  
17. 114-1468 [1] COVER  
18. 114-1471 [2] PLUG  
19. 095-1525 [2] SEAL-O-RING  
20. 1R-5854 [8] SCREW  
21. 1R-5852 [1] PLATE  
22. 1R-5851 [1] PLATE  
23. 1R-5850 [1] PLATE  
24. 114-1522 [1] GEAR  
25. 1R-5845 [1] GEAR  
26. 1R-5849 [1] RING-RETAINING  
27. 1U-8846 B GASKET MAKER (10ml)  
  B   USE AS REQUIRED
 

Information:

Operation and Maintenance Manual
Final Drive Sun Gear Removal
311B, 312B and 312B L Excavators
Final Drive Oil - Change
311B, 312B and 312B L Excavators
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Procedure for Proper Sealing of the Swing Drive and Final Drive on All Excavators {4050}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Duo-Cone Seals
311B, 312B & 312B L EXCAVATORS MACHINE SYSTEMS
Final Drive Sprockets
311B, 312B & 312B L EXCAVATORS MACHINE SYSTEMS
Travel Motor & Final Drive
311B, 312B & 312B L EXCAVATORS MACHINE SYSTEMS
Service Magazine
Use Spanner Wrench To Remove And Install Ring Nuts From Travel Drives {4350,4351}
1998/03/30
Tightening Procedure Is Changed For The Bolts That Hold The Sprocket To The Final Drive{4164}
1999/03/01
New Procedure for Checking Rolling Torque {4050, 7551}
2000/04/03
Correction to Disassembly and Assembly , "Final Drive Sprockets" {4164}
2001/11/12
Use the Correct Oil in Final Drives {4050}
2002/08/05
Correction to Service Magazine , "New Procedure for Checking Rolling Torque" {4050, 7551}
2004/02/09
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Managing the Life Cycles of Excavator Final Drives {4050}
2007/07/16
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Final Drive Motor Housings Are Available for Certain Excavators {4050}
Final Drive Motor Housings Are Available for Certain Excavators {4050}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 312B :

FASTENER GP
4I-7334 FASTENER GP
MOTOR AS
120-0002 MOTOR AS
LAMP GP
153-2521 LAMP GP
LAMP GP
150-6978 LAMP GP
LAMP GP
153-2452 LAMP GP
5I-8250 LAMP GP
LAMP GP
153-2523 LAMP GP
LAMP GP
5I-8251 LAMP GP
FINAL DRIVE GP
114-1437 FINAL DRIVE GP
FINAL DRIVE GP
151-9686 FINAL DRIVE GP
FINAL DRIVE GP
151-9686 FINAL DRIVE GP
FINAL DRIVE GP
114-1511 FINAL DRIVE GP
FINAL DRIVE GP
114-1511 FINAL DRIVE GP
FINAL DRIVE GP
151-9688 FINAL DRIVE GP
FINAL DRIVE GP
151-9688 FINAL DRIVE GP
FINAL DRIVE GP
114-1466 FINAL DRIVE GP

Truck sale:

Caterpillar 312B
 
Caterpillar 312B
- Crawler Excavators
N C MACHINERY CO.
 
 
Caterpillar 312B, Raupenbagger, Bau-Und Bergbauausrüstung


Caterpillar 312B, Quick Connectors, Construction
1,847 
Caterpillar 312B, Quick Connectors, Construction


Caterpillar 312B, Schnellwechsler, Bau-Und Bergbauausrüstung
1.962 
Caterpillar 312B, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick Connectors
FINNING CANADA – USED ATTACHMENTS
Canada
 
 
Caterpillar 312B, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Belgium
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.