AVSPARE.COM
parts catalog

9W9354 LINK AS-TRACK Part of 9W9360, 9W9359-Page196 320B EXCAVATOR




UNDERCARRIAGE

TRACK GP
 

#XEBP76880290
 

9W-9354: LINK AS-TRACK

9W9354 LINK AS-TRACK
Part of 9W9360, 9W9359-Page196
h53037e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-3138 [44] LINK-TRACK (LH)  
2. 095-0863 [1] COTTER  
3. 8E-8586 [1] LINK-MASTER (LH)  
4. 117-1372 [1] BUSHING-MASTER  
5. 8E-8585 [1] LINK-MASTER (RH)  
6. 8E-8587 [1] PIN-MASTER  
7. 5S-0754 [2] SPACER  
8. 9W-3137 [44] LINK-TRACK (RH)  
9. 6Y-8186 [44] PIN-TRACK  
10. 5S-0709 [180] WASHER-SEAL  
11. 117-1371 [44] BUSHING-TRACK  
 

#XEBP76880291
 

164-6893: LINK AS-TRACK

1646893 LINK AS-TRACK
Grease Lubricated
S/N 4NR (T01.02)-Up
Part of 1646624-Page196.01
An Attachment
h67471e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-3138 [44] LINK (LH)  
2. 095-0863 [1] COTTER  
3. 8E-8586 [1] LINK-MASTER (LH)  
4. 117-1372 [1] BUSHING-MASTER  
5. 8E-8585 [1] LINK-MASTER (RH)  
6. 8E-8587 [1] PIN  
7. 158-4381 [2] SEAL  
8. 9W-3137 [44] LINK-TRACK (RH)  
9. 6Y-8186 [44] PIN-TRACK  
10. 158-4380 [88] SEAL  
11. [44] BUSHING-TRACK  
 

#XEBP76880292
 

118-3984: TANK & MTG GP-HYDRAULIC

1183984 TANK & MTG GP-HYDRAULIC
1183998-Page200
h53660e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-3998 Y [1] TANK GP  
2. 7X-2553 [6] BOLT (L=40mm)  
3. 9X-8257 [6] WASHER  
  Y   SEPARATE ILLUSTRATION
 

#XEBP76880293
 

118-3998: TANK & FILTER GP-HYDRAULIC

1183998 TANK & FILTER GP-HYDRAULIC - Part 1 of 2
Capacity 200 Liters
Part of 1183984-Page198
1076996-Page204,1076995-Page223
h65698e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9299 [2] CLIP  
2. 8T-4121 [10] WASHER-HARD  
3. 8T-4137 [8] BOLT (L=20mm)  
4. 119-5162 [1] COVER  
5. 6V-6707 [1] SEAL-O-RING (ID=82.14mm)  
6. 115-8646 [1] GUARD  
7. 1P-4278 [1] CLAMP  
8. 107-6995 Y [1] FILTER GP  
9. 8T-4223 [8] WASHER-HARD  
10. 6J-2680 [2] SEAL-O-RING (ID=69.44mm)  
11. 8T-4956 [8] BOLT (L=35mm)  
12. 121-6263 [1] PIPE  
13. 7Y-1976 E HOSE (130cm)  
14. 107-6996 Y [1] SCREEN GP  
15. 111-4760 [1] SWITCH AS  
  102-8802 [1] RECEPTACLE KIT  
  3E-3365 [1] WEDGE  
  8T-8729 [2] PIN  
16. 3D-2824 [1] SEAL-O-RING (ID=23.47mm)  
17. 3K-0360 [1] SEAL-O-RING (ID=16.36mm)  
18. 4I-5394 [1] SENDER  
  4I-5490 [2] SCREW-MACHINE  
  095-0826 [2] LOCKWASHER  
19. 8T-4133 [2] NUT  
20. 094-3245 [1] GAUGE AS  
21. 7Y-4754 [2] BLOCK  
22. 094-3247 [2] BOLT (L=36mm)  
23. 095-1514 [4] SEAL-O-RING (ID=9.80mm)  
24. 095-1517 [4] SEAL-O-RING (ID=13.80mm)  
25. 096-4754 [1] PIPE  
  E   ORDER BY THE CENTIMETER
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP76880294
 

118-3998: TANK & FILTER GP-HYDRAULIC

1183998 TANK & FILTER GP-HYDRAULIC - Part 2 of 2
Capacity 200 Liters
Part of 1183984-Page198
h65699e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4121 [10] WASHER-HARD  
2. 8T-4137 [6] BOLT (L=20mm)  
3. 8T-4183 [2] BOLT (L=40mm)  
4. 2M-0849 [2] WASHER-HARD  
5. 8T-4136 [4] BOLT (L=25mm)  
6. 114-0741 [1] COVER  
7. 4J-0522 [1] SEAL-O-RING (ID=37.69mm)  
8. 169-7946 [1] COVER AS  
9. 4I-3743 [1] FILLER AS  
10. 4I-3745 [1] CAP  
11. 095-1730 [1] SEAL-O-RING (ID=179.30mm)  
12. 105-2652 [1] PLUG  
13. 6C-8496 [1] WASHER  
14. 095-1608 [1] SEAL-O-RING (ID=44.70mm)  
15. 112-0058 [1] COVER AS  
16. 1U-2827 [1] GUIDE  
17. 8J-8783 [1] VALVE  
18. 5M-2057 [1] SEAL-O-RING (ID=34.59mm)  
19. 9J-7031 [1] PLUG-DRAIN  
20. 4M-0189 [1] SEAL-O-RING (ID=104.37mm)  
21. 3J-7354 [1] SEAL-O-RING (ID=8.92mm)  
22. 9S-4182 [1] PLUG  
 

#XEBP76880295
 

107-6996: SCREEN GP

1076996 SCREEN GP
Part of 1183998-Page200
h50142e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-6641 [1] GUIDE  
2. 095-6639 [1] SPRING  
3. 096-2915 [1] ROD  
4. 8T-4133 [2] NUT  
5. 087-5297 [1] SCREEN AS  
6. 5H-5672 [1] SEAL-O-RING (ID=113.67mm)  
 

#XEBP76880296
 

109-9501: PUMP & MOUNTING GP

1099501 PUMP & MOUNTING GP
1241669-Page207,1232233-Page208
h53043e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-2233 Y [1] PUMP GP  
2. 124-1669 Y [1] COUPLING GP  
3. 8T-4195 [12] BOLT (L=30mm)  
4. 8T-4121 [12] WASHER  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP76880297
 

124-1669: COUPLING GP-PUMP

1241669 COUPLING GP-PUMP
Part of 1099501-Page206
h53046e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1905 [4] BOLT (L=60mm)  
2. 7Y-0468 [4] PIN  
3. 124-1670 [1] COUPLING AS  
4. 7Y-1900 [4] INSERT  
5. 7Y-1901 [1] ELEMENT  
6. 7Y-1902 [4] INSERT  
7. 7Y-0466 [2] SETSCREW  
8. 124-1671 [1] HUB  
9. 7Y-0468 [8] PIN  
10. 7Y-1904 [4] BOLT (L=50mm)  
 

#XEBP76880298
 

123-2233: PUMP GP-DOUBLE PISTON

1232233 PUMP GP-DOUBLE PISTON
Link
Part of 1099501-Page206
1262073-Page209,1262138-Page215
h53047e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-2073 Y [1] PUMP GP  
2. 126-2138 Y [1] HEAD GP  
3. 8T-8441 [4] BOLT (L=25mm)  
4. 087-4748 [1] PLATE  
5. 2H-9247 [1] SEAL-O-RING (ID=132.94mm)  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  123-2043 [1] SEAL KIT  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP76880299
 

126-2073: PUMP GP-HYDRAULIC

1262073 PUMP GP-HYDRAULIC
Part of 1232233-Page208
1336911-Page210,0874780-Page212,0874781-Page213
h52783e XEBP7688
  For full view, you need register

Parts for your 320B EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 087-4780 Y [1] ROTATING GP  
2. 9T-3928 [1] PLUG  
3. 087-4781 Y [1] ROTATING GP  
4. 9T-3869 [1] SEAL  
5. 9T-3375 [1] COVER  
6. 095-0946 [1] RING (RETAINING)  
7. 4M-0189 [1] SEAL-O-RING (ID=104.37mm)  
8. 126-2074 [1] HOUSING  
9. 133-6911 Y [1] PUMP GP  
10. 099-5818 [1] SHAFT  
11. 9T-3882 [1] BEARING AS  
12. 9T-3408 [1] GEAR  
13. 9T-5915 [1] KEY  
14. 9T-3879 [1] BEARING  
15. 9T-3726 [3] PLUG  
  Y   SEE SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Track Adjustment - Inspect
320B, 320B L and 320B N Excavators
Track Adjustment - Adjust
320B, 320B L and 320B N Excavators
Track Information
320B, 320B L and 320B N Excavators
Special Instruction
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Technical Information Bulletin
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
Specifications
Track Shoe Bolts
320B Excavator Machine System Specifications
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Undercarriage Reconditioning Bulletin
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Disassembly and Assembly
Track Carrier Rollers
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Track Rollers
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Track Assemblies
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Front Idlers, Recoil Springs &amp; Hydraulic Track Adjusters
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Hydraulic Track Adjusters
320B, 320B L,320B LN, 320B N, & 320B S EXCAVATORS MACHINE SY
Service Magazine
Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}

Caterpillar Parts SIS Catalog 320B :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.