ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
CYLINDER HEAD GPVALVE MECHANISM GP
CYLINDER BLOCK GP
VALVE MECHANISM GP
ENGINE ARRANGEMENT
ENGINE AR#XEBP78430001
162-6178: ENGINE AR
1626178 ENGINE AR-PART 1 OF 2
S/N 1AKH 1-01803, ALF 1-00239, BCB 1-00196, BDB 1-00242
S/N 1AKH 1-01803, ALF 1-00239, BCB 1-00196, BDB 1-00242
Parts for your 320C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
178-6516 | [1] | PAN GP (OIL) | ||
178-6512 | [1] | CAMSHAFT GP | ||
178-6518 | [1] | CRANKSHAFT GP | ||
178-6513 | [1] | CYLINDER BLOCK GP | ||
178-6508 | [1] | CYLINDER HEAD GP | ||
178-6509 | [1] | VALVE MECHANISM GP | ||
178-6510 | [1] | COVER GP (VALVE MECHANISM) | ||
5I-8027 | [1] | FLYWHEEL GP | ||
[1] | HOUSING GP (FLYWHEEL) | |||
178-6519 | [1] | GEAR GP (FRONT) | ||
178-6514 | [1] | HOUSING GP (FRONT) | ||
178-6517 | [1] | PISTON & ROD GP | ||
178-6531 | [1] | MOUNTING GP (ALTERNATOR) | ||
178-6525 | [1] | FILTER GP (ENGINE OIL) | ||
178-6524 | [1] | LINES GP (ENGINE OIL) | ||
178-6502 | [1] | BREATHER GP | ||
5I-7770 | [1] | LINES GP (TURBOCHARGER OIL) |
#XEBP78430002
162-6178: ENGINE AR
1626178 ENGINE AR-PART 2 OF 2
S/N AKH 1-01803, ALF 1-00239, BCB 1-00196, BDB 1-00242
S/N AKH 1-01803, ALF 1-00239, BCB 1-00196, BDB 1-00242
Parts for your 320C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
178-6632 | [1] | PUMP GP (WATER) | ||
178-6527 | [1] | LINES GP (WATER) | ||
125-2956 | [1] | COOLER GP (ENGINE OIL) | ||
178-6526 | [1] | FAN GP (SUCTION) | ||
178-6520 | [1] | MANIFOLD GP (INLET) | ||
178-6522 | [1] | LINES GP (AIR) | ||
178-6521 | [1] | MANIFOLD GP (EXHAUST) | ||
5I-8018 | [1] | TURBOCHARGER GP | ||
178-6523 | [1] | MUFFLER GP | ||
201-3780 | [1] | PUMP GP (FUEL INJECTION) | ||
178-6530 | [1] | FILTER GP (FUEL) | ||
178-6528 | [1] | LINES GP (FUEL) | ||
193-2749 | [6] | NOZZLE GP (UNIT INJECTOR) | ||
125-2963 | [1] | MOUNTING GP (STARTING MOTOR) | ||
125-2988 | [1] | STARTING MOTOR GP (ELECTRIC) | ||
212-8622 | [1] | ALTERNATOR GP (CHARGING) |
#XEBP78430003
183-8198: ENGINE AR
1838198 ENGINE AR-PART 1 OF 2
S/N 1AKH 01804-UP, ALF 00240-UP, BCB 00197-UP, BDB 00243-UP
S/N 1AKH 01804-UP, ALF 00240-UP, BCB 00197-UP, BDB 00243-UP
Parts for your 320C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
178-6516 | [1] | PAN GP (OIL) | ||
178-6512 | [1] | CAMSHAFT GP | ||
178-6518 | [1] | CRANKSHAFT GP | ||
178-6590 | [1] | CYLINDER BLOCK GP | ||
178-6508 | [1] | CYLINDER HEAD GP | ||
178-6509 | [1] | VALVE MECHANISM GP | ||
178-6510 | [1] | COVER GP (VALVE MECHANISM) | ||
205-6792 | [1] | FLYWHEEL GP | ||
[1] | HOUSING GP (FLYWHEEL) | |||
178-6519 | [1] | GEAR GP (FRONT) | ||
178-6514 | [1] | HOUSING GP (FRONT) | ||
178-6517 | [1] | PISTON & ROD GP | ||
178-6531 | [1] | MOUNTING GP (ALTERNATOR) | ||
196-8189 | [1] | FILTER GP (ENGINE OIL) | ||
178-6524 | [1] | LINES GP (ENGINE OIL) | ||
178-6502 | [1] | BREATHER GP | ||
5I-7770 | [1] | LINES GP (TURBOCHARGER OIL) |
#XEBP78430004
183-8198: ENGINE AR
1838198 ENGINE AR-PART 2 OF 2
S/N AKH 01804-UP, ALF 00240-UP, BCB 00197-UP, BDB 00243-UP
S/N AKH 01804-UP, ALF 00240-UP, BCB 00197-UP, BDB 00243-UP
Parts for your 320C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
183-8205 | [1] | PUMP GP (WATER) | ||
205-6796 | [1] | LINES GP (WATER) | ||
125-2956 | [1] | COOLER GP (ENGINE OIL) | ||
178-6526 | [1] | FAN GP (SUCTION) | ||
178-6520 | [1] | MANIFOLD GP (INLET) | ||
178-6522 | [1] | LINES GP (AIR) | ||
178-6521 | [1] | MANIFOLD GP (EXHAUST) | ||
5I-8018 | [1] | TURBOCHARGER GP | ||
178-6523 | [1] | MUFFLER GP | ||
201-3780 | [1] | PUMP GP (FUEL INJECTION) | ||
178-6530 | [1] | FILTER GP (FUEL) | ||
178-6528 | [1] | LINES GP (FUEL) | ||
193-2749 | [6] | NOZZLE GP (UNIT INJECTOR) | ||
125-2963 | [1] | MOUNTING GP (STARTING MOTOR) | ||
125-2988 | [1] | STARTING MOTOR GP (ELECTRIC) | ||
212-8622 | [1] | ALTERNATOR GP (CHARGING) |
#XEBP78430005
178-6508: CYLINDER HEAD GP
1786508 CYLINDER HEAD GP
PART OF 1626178-Page 12, 1838198-Page 13.01
PART OF 1626178-Page 12, 1838198-Page 13.01
Parts for your 320C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 183-8171 | [1] | HEAD AS | |
2. | 5I-4915 | [12] | CAP | |
3. | 183-8172 | [3] | GUIDE (INTAKE) | |
4. | 5I-7505 | [3] | PLUG | |
5. | 099-4388 | [3] | CAP | |
6. | 183-8173 | [3] | GUIDE (EXHAUST) | |
7. | 5I-4916 | [1] | PLUG | |
8. | 5I-8011 | [3] | INSERT (INTAKE) | |
9. | 5I-8012 | [3] | INSERT (EXHAUST) | |
10. | 5I-7583 | [4] | CAP | |
11. | 5I-5591 | [1] | PLUG | |
12. | 095-2038 | [1] | WASHER | |
13. | 5I-7718 | [26] | BOLT (L=125mm) | |
14. | 5I-7648 | [2] | GASKET | |
15. | 183-8174 | [1] | HEAD AS | |
16. | 5I-4915 | [12] | CAP | |
17. | 183-8172 | [3] | GUIDE (INTAKE) | |
18. | 5I-7505 | [3] | PLUG | |
19. | 099-4388 | [3] | CAP | |
20. | 183-8173 | [3] | GUIDE (EXHAUST) | |
21. | 5I-8011 | [3] | INSERT (INTAKE) | |
22. | 5I-8012 | [3] | INSERT (EXHAUST) | |
23. | 5I-7583 | [4] | CAP | |
24. | 3B-4505 | [2] | LOCKWASHER | |
25. | 8T-4189 | [2] | BOLT (L=20mm) | |
26. | 4W-8339 | [1] | COVER | |
27. | 5I-7728 | [1] | GASKET | |
28. | 183-8215 | [1] | PIPE | |
29. | 5I-5029 | [2] | BOLT (L=17mm) | |
30. | 095-2038 | [4] | WASHER |
#XEBP78430006
178-6509: VALVE MECHANISM GP
1786509 VALVE MECHANISM GP
PART OF 1626178-Page 12, 1838198-Page 13.01
PART OF 1626178-Page 12, 1838198-Page 13.01
Parts for your 320C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5I-4921 | [2] | BOLT (L=21mm) | |
2. | 5I-7720 | [2] | PIPE | |
3. | 5I-7622 | [4] | RING | |
4. | 2W-6047 | [4] | WASHER | |
5. | 5I-7590 | [6] | ROCKER AS | |
6. | 5I-7631 | [1] | BUSHING | |
7. | 094-9525 | [1] | SCREW | |
8. | 091-3474 | [1] | NUT | |
9. | 5I-7722 | [6] | BRACKET | |
10. | 095-8638 | [12] | WASHER | |
11. | 5I-7730 | [6] | BOLT | |
12. | 8T-4189 | [6] | BOLT (L=20mm) | |
13. | 5I-7721 | [4] | SPRING | |
14. | 5I-7731 | [2] | SHAFT AS | |
15. | 094-4696 | [1] | PLUG | |
16. | 5I-7630 | [12] | CAP | |
17. | 5I-7719 | [24] | COTTER (AVAILABLE IN SET WITH PAIR) | |
18. | 5I-7625 | [12] | RETAINER | |
19. | 5I-7624 | [12] | SEAL | |
20. | 5I-7740 | [12] | SPRING | |
21. | 5I-7739 | [6] | VALVE (EXHAUST) | |
22. | 5I-7738 | [6] | VALVE (INTAKE) | |
23. | 178-6532 | [6] | ROCKER AS | |
24. | 5I-7631 | [1] | BUSHING | |
25. | 094-9525 | [1] | SCREW | |
26. | 091-3474 | [1] | NUT |
#XEBP78430007
178-6513: CYLINDER BLOCK GP
1786513 CYLINDER BLOCK GP
S/N AKH 1-01803, ALF 1-00239, BCB 1-00196, BDB 1-00242
PART OF 1626178-Page 12
S/N AKH 1-01803, ALF 1-00239, BCB 1-00196, BDB 1-00242
PART OF 1626178-Page 12
Parts for your 320C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 178-6536 | [1] | CRANKCASE AS | |
2. | 5I-7529 | [1] | BUSHING | |
3. | 5I-7528 | [2] | BUSHING | |
4. | 5I-8009 | [1] | BUSHING | |
5. | 5I-7672 | [1] | SHAFT AS | |
6. | 095-0879 | [1] | PIN | |
7. | 5I-7523 | [6] | SLEEVE | |
8. | 4I-9664 | [4] | PIN | |
9. | 099-4420 | [2] | PIN | |
10. | 095-2011 | [1] | CAP | |
11. | 5I-7505 | [13] | PLUG | |
12. | 3P-1896 | [6] | PLUG | |
13. | 5I-7525 | [1] | PLUG | |
14. | 5I-7524 | [2] | SEAL | |
15. | 094-7115 | [14] | BOOT | |
16. | 5I-7652 | [1] | CAP SET | |
17. | 6V-8236 | [6] | PIN | |
18. | 5I-7724 | [2] | PIN | |
19. | 096-3741 | [5] | CAP | |
20. | 5I-7526 | [12] | VALVE | |
21. | 8T-4191 | [1] | BOLT (L=16mm) | |
22. | 095-2039 | [1] | WASHER | |
23. | 095-2005 | [2] | CAP | |
24. | 096-2501 | [3] | WASHER | |
25. | 8T-4179 | [3] | BOLT (L=20mm) | |
26. | 5I-7588 | [7] | BEARING SET (STANDARD) | |
5I-7784 A | [7] | BEARING SET (US=0.25mm) | ||
5I-7785 A | [7] | BEARING SET (US=0.50mm) | ||
5I-7786 A | [7] | BEARING SET (US=0.75mm) | ||
27. | 5I-7654 | [3] | PLATE (STANDARD) | |
5I-7787 A | [3] | PLATE (OS=0.15mm) | ||
5I-7788 A | [3] | PLATE (OS=0.30mm) | ||
5I-7789 A | [3] | PLATE (OS=0.45mm) | ||
28. | 5I-8005 | [1] | SWITCH | |
29. | 4D-7794 | [1] | CLIP | |
30. | 7X-2536 | [1] | BOLT (L=14mm) | |
31. | 095-8638 | [1] | WASHER | |
32. | 5I-7636 | [1] | EYE | |
33. | 5I-7603 | [1] | EYE | |
34. | 5I-7978 | [1] | SHEET | |
A | NOT PART OF THIS GROUP |
#XEBP78430008
178-6590: CYLINDER BLOCK GP
1786590 CYLINDER BLOCK GP
S/N AKH 01804-UP, ALF 00240-UP, BCB 00197-UP, BDB 00243-UP
PART OF 1838198-Page 13.01
S/N AKH 01804-UP, ALF 00240-UP, BCB 00197-UP, BDB 00243-UP
PART OF 1838198-Page 13.01
Parts for your 320C EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 183-8221 | [1] | CRANKCASE AS | |
2. | 5I-7529 | [1] | BUSHING | |
3. | 5I-7528 | [2] | BUSHING | |
4. | 5I-8009 | [1] | BUSHING | |
5. | 222-8201 | [1] | SHAFT | |
6. | 095-2005 | [2] | CAP | |
7. | 5I-7523 | [6] | SLEEVE | |
8. | 4I-9664 | [4] | PIN | |
9. | 099-4420 | [2] | PIN | |
10. | 095-2011 | [1] | CAP | |
11. | 5I-7505 | [13] | PLUG | |
12. | 3P-1896 | [6] | PLUG | |
13. | 5I-7525 | [1] | PLUG | |
14. | 5I-7524 | [2] | SEAL | |
15. | 094-7115 | [14] | BOLT | |
16. | 5I-7652 | [1] | CAP SET | |
17. | 6V-8236 | [6] | PIN | |
18. | 5I-7724 | [2] | PIN | |
19. | 096-3741 | [5] | CAP | |
20. | 5I-7526 | [12] | VALVE | |
21. | 8T-4191 | [1] | BOLT (L=16mm) | |
22. | 095-2039 | [1] | WASHER | |
23. | 5I-7978 | [1] | SHEET | |
24. | 096-2501 | [3] | WASHER | |
25. | 8T-4179 | [3] | BOLT (L=20mm) | |
26. | 5I-7588 | [7] | BEARING SET (STANDARD) | |
5I-7784 A | [7] | BEARING SET (US=0.25mm) | ||
5I-7785 A | [7] | BEARING SET (US=0.50mm) | ||
5I-7786 A | [7] | BEARING SET (US=0.75mm) | ||
27. | 5I-7654 | [3] | PLATE (STANDARD) | |
5I-7787 A | [3] | PLATE (OS=0.15mm) | ||
5I-7788 A | [3] | PLATE (OS=0.30mm) | ||
5I-7789 A | [3] | PLATE (OS=0.45mm) | ||
28. | 5I-8005 | [1] | SWITCH | |
29. | 4D-7794 | [1] | CLIP | |
30. | 7X-2536 | [1] | BOLT (L=14mm) | |
31. | 095-8638 | [1] | WASHER | |
32. | 5I-7636 | [1] | EYE | |
33. | 5I-7603 | [1] | EYE |
#XEBP78430009
178-6510: COVER GP-VALVE MECHANISM
1786510 COVER GP-VALVE MECHANISM
PART OF 1626178-Page 12, 1838198-Page 13.01
PART OF 1626178-Page 12, 1838198-Page 13.01
Information:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
Engine News
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Service Magazine
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08
2001/01/08
Caterpillar Parts SIS Catalog 320C :
Truck sale:
288,000
287,325
287,325