AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

312C L SUPPLEMENT FOR EXCAVATOR CBA00001-UP (MACHINE) ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



EXCAVATOR 312C L EXCAVATOR CBA
 312C L SUPPLEMENT FOR EXCAVATOR CBA00001-UP (MACHINE) XEBP7977 312C L CBA   (2000)

Parts group 312C L:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
LIGHTING GP
116-0248 LIGHTING GP
1160248 LIGHTING GP
1211010-Page 4, 1532651-Page 5
LAMP GP-FLOOD
153-2521 LAMP GP-FLOOD
1532521 LAMP GP-FLOOD
PART OF 1160248-Page 3
WIRING GP
HARNESS AS
121-1010 HARNESS AS
1211010 HARNESS AS
PART OF 1160248-Page 3
LAMP GP-FLOOD
153-2521 LAMP GP-FLOOD
1532521 LAMP GP-FLOOD
PART OF 1160248-Page 3

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Operation and Maintenance Manual
Travel Alarm - Test - If Equipped
312C Excavator
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Testing and Adjusting
Travel Alarm Is Abnormal - Troubleshoot - CID 376
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
312C Excavator
Special Instruction
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternator and Regulator
3064 and 3066 Engines for Caterpillar Built Machines
Alternator and Regulator
3064 and 3066 Engines for Caterpillar Built Machines
Systems Operation
General Information (Electrical System)
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Power Circuit
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Start and Stop Circuit
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Charging Circuit
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Charging System - Test
3064 and 3066 Engines for Caterpillar Built Machines
Alternator - Test
3064 and 3066 Engines for Caterpillar Built Machines
Battery Voltage Is Abnormal - Troubleshoot - CID 168
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Charging System - Test
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Troubleshooting
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Disassembly and Assembly
Alternator - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
V-Belts - Remove and Install
312C Excavator 3064 Engine Supplement
Alternator - Remove and Install
312C Excavator 3064 Engine Supplement
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
A New V-Belt With Increased Reliability Is Available for the Water Pump Group or the Crankshaft Pulley Gp {1357, 1358, 1359, 1361, 1405, 1802}
2011/03/03
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Engine News
Operation and Maintenance Manual
Battery - Clean
312C Excavator
Battery Hold-Down - Tighten
312C Excavator
Battery - Recycle
312C Excavator
Fuses - Replace
312C Excavator
Battery or Battery Cable - Inspect/Replace
312C Excavator
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Systems Operation
Charging Circuit
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Testing and Adjusting
Battery Voltage Is Abnormal - Troubleshoot - CID 168
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Charging System - Test
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Battery - Test
3064 and 3066 Engines for Caterpillar Built Machines
Troubleshooting
MID 124 - CID 0168 - FMI 00
Machine Security System
MID 124 - CID 0168 - FMI 01
Machine Security System
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Electrical Power Supply - Test
MSS3s Machine Security System
Service Magazine
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Systems Operation
Electronic Control System
312C Excavator Hydraulic System
Service Magazine
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Testing and Adjusting
Engine Controller Is Abnormal - Troubleshoot - 590
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Service Magazine
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
New Software is Now Used {7610, 7620}
2009/02/16
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
New Software is Now Used {7610, 7620}
2009/02/16
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Systems Operation
Tool Control
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Machine Security System - If Equipped
312C Excavator
Special Instruction
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
Technical Information Bulletin
Instructions For Machines Configured With Updated Governor Motors
Instructions For Machines Configured With Updated Governor Motors
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
Systems Operation
General Information (Electronic Control System)
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Engine and Hydraulic Pump Controller
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Related Components
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Engine and Pump Regulation
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Pump Regulation
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Engine Speed Control
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Automatic Engine Control
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
One Touch Low Idle
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Tool Control
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Straight Travel Control
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Engine Speed Protection
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Swing Lock System
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Operation of Status Indicator
Machine Security System
Protected Functions
Machine Security System
Diagnostic Operation
Machine Security System
Events
Machine Security System
Service Operation Using Machine Security System
Machine Security System
Key Information
Machine Security System
Service Operation Using Service Tool
Machine Security System
Electronic Control Module (ECM)
Machine Security System
System Overview
Machine Security System
Scheduled Access - "Security System Bypass Times"
Machine Security System
Backup System
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Controller
312C and 315C Excavators Tool Control System
General Information
Machine Security System
Normal Operation
Machine Security System
System Components
Machine Security System
Cat Data Link
Machine Security System
General Information
MSS3s Machine Security System
System Overview
MSS3s Machine Security System
Normal Operation
MSS3s Machine Security System
Operation of Status Indicator
MSS3s Machine Security System
Key Information
MSS3s Machine Security System
Scheduled Access - "Security System Bypass Times"
MSS3s Machine Security System
Diagnostic Operation
MSS3s Machine Security System
Events
MSS3s Machine Security System
Protected Functions
MSS3s Machine Security System
Service Operation Using Machine Security System
MSS3s Machine Security System
Service Operation Using Service Tool
MSS3s Machine Security System
Electronic Control Module (ECM)
MSS3s Machine Security System
System Components
MSS3s Machine Security System
Data Links
MSS3s Machine Security System
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING PRODUCT LINK PL121 SATELLITE RADIOS ON CERTAIN EXCAVATORS, WHEELED EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES
Testing and Adjusting
Initial Troubleshooting Procedure
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Using Service Mode
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Adjust Clock Mode
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Switch Status Mode
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Status Mode
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Configuration Mode
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Active Error Mode
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Logged Error Mode
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Logged Event Mode
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Device Test
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Controller - Replace
312C and 315C Excavators Tool Control System
Controller Input and Output Values
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Troubleshooting Diagnostic Codes
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Check of Controller LED Indicator - Troubleshoot
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
No Power Supply to Controller - Troubleshoot
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
AEC Is Abnormal - Troubleshoot
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Automatic Travel Speed Change Is Abnormal - Troubleshoot - CID 0598, CID 1161, and CID 1162
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Swing Is Inoperable - Troubleshoot - CID 374
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Controller Connector Contact Identification
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
System Schematic
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
General Information
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Using Caterpillar Electronic Technician
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Glossary of Terms
Machine Security System
Key - Program
Machine Security System
System Disarm - Program - Security System Bypass
Machine Security System
General Information
Machine Security System
Electronic Control Module (ECM) - Replace
Machine Security System
Controller Connector Contact Identification
312C and 315C Excavators Tool Control System
ECM Summary Mode
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Controller - Flash Program
312C and 315C Excavators Tool Control System
Software - Uninstall - "Immobilizer" Feature
Machine Security System
Time - Set
Machine Security System
Product Identification Number - Program
Machine Security System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Factory Password - Obtain
Machine Security System
Communication Problem Between Controller and Monitor - Troubleshoot - "CID 248" and "CID 588"
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
General Information
MSS3s Machine Security System
Product Identification Number - Program
MSS3s Machine Security System
Key - Program
MSS3s Machine Security System
System Disarm - Program - Security System Bypass
MSS3s Machine Security System
Factory Password - Obtain
MSS3s Machine Security System
Time - Set
MSS3s Machine Security System
Glossary of Terms
MSS3s Machine Security System
Software - Uninstall - "Immobilizer" Feature
MSS3s Machine Security System
Troubleshooting
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System
Lost Key
Machine Security System
Diagnostic Code List
Machine Security System
General Information
Machine Security System
Engine Does Not Crank and Status Indicator Is Green
Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
Machine Security System
MID 124 - CID 0248 - FMI 12
Machine Security System
MID 124 - CID 0817 - FMI 04
Machine Security System
MID 124 - CID 1391 - FMI 03
Machine Security System
MID 124 - CID 1391 - FMI 04
Machine Security System
MID 124 - CID 1392 - FMI 03
Machine Security System
MID 124 - CID 1392 - FMI 04
Machine Security System
Lost Key (MSS)
MSS3s Machine Security System
Engine Does Not Crank and Status Indicator Is Green
MSS3s Machine Security System
Engine Does Not Start and Status Indicator Is Continuously Red
MSS3s Machine Security System
ECM Output Driver - Test
MSS3s Machine Security System
ECM Software - Install
MSS3s Machine Security System
ECM - Replace
MSS3s Machine Security System
ECM - Configure
MSS3s Machine Security System
Service Magazine
New Monitor Software is Now Available {7490, 7620}
2002/08/26
Disregard theService Magazine , "Correction to Systems Operation Testing and Adjusting , "Engine Speed Control"" {1931}
2003/07/28
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14
New Software is Now Used {7610, 7620}
2009/02/16
A New Electronic Control Module is Now Available to Improve the Reliability of the Machine on Certain Excavators {7600, 7610}
2009/08/31
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Correction to Systems Operation Testing and Adjusting , "Engine Speed Control" {1435, 7332}
2002/06/24
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL542 OR PL240B CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Electronic Control Module (ECM) - Replace
Machine Security System
Controller - Flash Program
312C and 315C Excavators Tool Control System
Electronic Control Module (ECM) - Flash Program
Machine Security System
Service Magazine
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Special Instruction
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13
Disassembly and Assembly
Boom Lighting - Remove and Install
312C Excavator Machine Systems
Service Magazine
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
An Improved Halogen Lamp is Now Available for Certain Excavators {1434}
An Improved Starting Motor is Now Available {1453}
2007/04/30
A New Starter Solenoid is Now Available {1467}
2008/03/17
Operation and Maintenance Manual
Circuit Breakers - Reset
312C Excavator
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
The Reliability and Durability of the Electric Starting Motor Is Increased {1408, 1417, 1453, 7499}
2006/03/27
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Specifications
Engine Oil Pressure Sender
3064 and 3066 Engines for Caterpillar Built Machines
Systems Operation
Senders
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Senders
312C and 315C Excavators Tool Control System
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Intermittent Open Circuit Fault due to Fuel Level Sender Connector Difficult To Fully Seat On Certain Cat<SUP>&reg;</SUP> Products{1408, 1439, 7481, 7483}
Intermittent Open Circuit Fault due to Fuel Level Sender Connector Difficult To Fully Seat On Certain Cat® Products{1408, 1439, 7481, 7483}
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Testing and Adjusting
Speed Sensor - Replace
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Check of Speed Sensor - Troubleshoot - CID 190
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Troubleshooting
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Temperature Sensor (Ambient Air) - Remove and Install
312C Excavator Machine Systems
Coolant Temperature Sensor - Remove and Install
312C Excavator Machine Systems
Cab Air Temperature Sensor - Remove and Install
312C Excavator Machine Systems
Service Magazine
Preventing Oil Leaks from the Pressure Sensors on the Main Hydraulic Pump {5057, 5070}
2007/04/02
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Disassembly and Assembly
Fuel Shutoff Solenoid - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Air Inlet Heater - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/24
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
3064 and 3066 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 &amp; C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Pinion Clearance - Adjust
3064 and 3066 Engines for Caterpillar Built Machines
Electric Starting System - Test
3064 and 3066 Engines for Caterpillar Built Machines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Electric Starting Motor - Remove and Install - Engine In Chassis
312C Excavator 3064 Engine Supplement
Service Magazine
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Removing the Plug from the Shaft on the Starter Motor {1453}
2004/03/08
The Reliability and Durability of the Electric Starting Motor Is Increased {1408, 1417, 1453, 7499}
2006/03/27
The Starting Procedure is Revised for Certain Excavators and Mobile Hydraulic Power Units {1453}
2010/06/08
Operation and Maintenance Manual
Battery Disconnect Switch
312C Excavator
Special Instruction
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 163-6785 SWITCH ASSEMBLY, IF FAILED, ON CERTAIN 311C, 312C, 315C, 318C, 319C, 320C, 322C, 325C, AND 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 163-6785 SWITCH ASSEMBLY, IF FAILED, ON CERTAIN 311C, 312C, 315C, 318C, 319C, 320C, 322C, 325C, AND 330C EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Modification Of The Switch Assembly For Sensing The Hydraulic Oil And Engine Oil Level
Modification Of The Switch Assembly For Sensing The Hydraulic Oil And Engine Oil Level
Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}
Specifications
Engine Oil Pressure Switch
3064 and 3066 Engines for Caterpillar Built Machines
Coolant Temperature Switch
3064 and 3066 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 163-6785 SWITCH ASSEMBLY, IF FAILED, ON CERTAIN 311C, 312C, 315C, 318C, 319C, 320C, 322C, 325C, AND 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 163-6785 SWITCH ASSEMBLY, IF FAILED, ON CERTAIN 311C, 312C, 315C, 318C, 319C, 320C, 322C, 325C, AND 330C EXCAVATORS
Service Letter-Asia
Systems Operation
Switches
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Switches
312C and 315C Excavators Tool Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 163-6785 SWITCH ASSEMBLY, IF FAILED, ON CERTAIN 311C, 312C, 315C, 318C, 319C, 320C, 322C, 325C, AND 330C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 163-6785 SWITCH ASSEMBLY, IF FAILED, ON CERTAIN 311C, 312C, 315C, 318C, 319C, 320C, 322C, 325C, AND 330C EXCAVATORS
Testing and Adjusting
Low Idle Switch Does Not Work - Troubleshoot
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Disassembly and Assembly
Coolant Temperature Switch - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Engine Oil Pressure Switch - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
Correction to Systems Operation Testing and Adjusting , "Engine Speed Control" {1435, 7332}
2002/06/24
The Oil Level Switch for the Engine Oil and for the Hydraulic Oil Is Improved {1302, 5056, 7422}
2011/08/03
Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
2003/10/27
The Oil Pressure Switch for the Engine Is Improved {1201, 1435}
2005/05/23
The Reliability and Durability of the Electric Starting Motor Is Increased {1408, 1417, 1453, 7499}
2006/03/27
Troubleshooting Procedures for the Control Panel {1408, 1802, 5057, 5258, 5479, 7490}
2006/02/06
A New Backup Switch for the Engine Speed Control Is Available {1408, 1435}
2006/11/27
Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18
Troubleshooting Procedure for the Engine Oil Pressure Switch {1403, 1408}
2007/08/06
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/05/04
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/07/18
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/01
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
Special Instruction
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Using Caterpillar Electronic Technician
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Service Tools
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Troubleshooting
Service Tools
Machine Security System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Machine Security System
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
312C and 315C Excavators Tool Control System
Service Tools
312C and 315C Excavators Tool Control System
Service Tools
Product Link - PL522/523
Service Tools
Product Link 121S/300
Service Tools
MSS3s Machine Security System
Service Magazine
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/04
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/09/25
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
2014/10/07
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Systems Operation
Solenoid Valves
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Solenoid Valve (Proportional Reducing) - Power Shift System
312C Excavator Hydraulic System
Testing and Adjusting
Proportional Reducing Valve - Calibrate - Power Shift
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Proportional Reducing Valve Sweep - Test - Power Shift
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Check of Proportional Reducing Valve - Troubleshoot - CID 581
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Testing and Adjusting
Overload Warning - Set - If Equipped
312C Excavator Hydraulic System
Service Magazine
Procedure for Setting the Value of the Overload Warning {5258, 7490}
2007/02/05
Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Battery - Recycle
312C Excavator
Power Receptacle - If Equipped
312C Excavator
Window (Power) - If Equipped
312C Excavator
Fuses - Replace
312C Excavator
Battery Disconnect Switch
312C Excavator
Quick Coupler Control - If Equipped
312C Excavator
Battery or Battery Cable - Inspect/Replace
312C Excavator
Special Instruction
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Installation of 183-9371 Coupler Lines Gp (KIT, WEDGE LOCK){1408, 5000, 5051, 5057, 6129, 7000, 7332}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Procedure to Install 169-9513 Hydraulic Kit on Certain Excavators{1408, 5057, 5479, 6129}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Troubleshooting Instructions for the 157-3210 Control Panel {1408, 7320}
Troubleshooting Instructions for the 157-3210 Control Panel {1408, 7320}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Modification Of The Switch Assembly For Sensing The Hydraulic Oil And Engine Oil Level
Modification Of The Switch Assembly For Sensing The Hydraulic Oil And Engine Oil Level
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS
Service Letter-Asia
Systems Operation
Switches
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Sensors
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Senders
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
General Information (Electrical System)
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Power Circuit
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Start and Stop Circuit
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Low Current Circuit
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Starting Aid Circuit
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Senders
312C and 315C Excavators Tool Control System
Switches
312C and 315C Excavators Tool Control System
Relays
312C and 315C Excavators Tool Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM REWORKING THE AIR INLET TO PREVENT HEATER RELAY FAILURES ON CERTAIN 311C, 312C, 314C, 315C, 318C, 320C AND 321C EXCAVATORS
Testing and Adjusting
Speed Sensor - Replace
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Harness and Wire Identification
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Check of Speed Sensor - Troubleshoot - CID 190
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Engine Speed Dial Does Not Work - Troubleshoot - CID 586
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Low Idle Switch Does Not Work - Troubleshoot
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
System Schematic
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Electrical Components And Connector Locations
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
System Schematic
Machine Security System
Electric Starting System - Test
3064 and 3066 Engines for Caterpillar Built Machines
Overload Warning - Set - If Equipped
312C Excavator Hydraulic System
Electrical Connector - Inspect
Machine Security System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
MSS3s Machine Security System
Troubleshooting
Harness and Wire Identification
312C and 315C Excavators Tool Control System
Electrical Component and Connector Locations
312C and 315C Excavators Tool Control System
Pressure Switch (Work Tool)
312C and 315C Excavators Tool Control System
Pressure Switch (Medium)
312C and 315C Excavators Tool Control System
Rocker Switch (One Pump/Two Pump)
312C and 315C Excavators Tool Control System
Rocker Switch (One-Way/Two-Way)
312C and 315C Excavators Tool Control System
Electrical Component and Connector Locations
Machine Security System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
The Main Power Relay Has Improved Sealing {1423}
2002/11/18
The Pressure Sensors for the Main Hydraulic Pump and the Coil for the Refrigerant Compressor are Improved {1408, 1802, 5057, 5059, 5456}
2004/06/21
An Improved Expansion Tank Assembly Is Now Used {1353, 1374, 1408}
2004/12/20
A New Angle Prevents Damage to the Wiring Harness {1408}
2004/10/04
The Reliability and Durability of the Electric Starting Motor Is Increased {1408, 1417, 1453, 7499}
2006/03/27
Troubleshooting Procedures for the Control Panel {1408, 1802, 5057, 5258, 5479, 7490}
2006/02/06
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2009/08/31
Troubleshooting the Rotary Switch Assembly for the Engine Speed {1408, 7332}
2008/08/18
Troubleshooting Procedure for the Engine Oil Pressure Switch {1403, 1408}
2007/08/06
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Software and a New Rotary Switch Improve the Reliability of the Engine Speed Dial on Excavators {1408, 7332, 7610, 7620}
2011/07/14
The Mounting of the Harness for the Water Temperature Sensor is Improved on Certain 311C, 312C and 314C Excavators {1071, 1408}
2009/03/09
A New Harness Assembly for the Right Hand Console is Now Available {1408}
2011/04/04
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Service Magazine
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Operation and Maintenance Manual
Clock Adjustment
312C Excavator
Main Menu
312C Excavator
Language Selection
312C Excavator
Display Adjustment
312C Excavator
Filter/Fluid Maintenance Information
312C Excavator
Password Change
312C Excavator
Filter/Fluid Hours Reset
312C Excavator
Password Entry
312C Excavator
Machine Information
312C Excavator
Work Tool Selection
312C Excavator
Monitoring System
312C Excavator
Special Instruction
Programming the Tool Control System in the Electronic Control Monitor for Using a Hammer on the Auxiliary Hydraulic Control System 3 (NACD Hammer){7490}
Programming the Tool Control System in the Electronic Control Monitor for Using a Hammer on the Auxiliary Hydraulic Control System 3 (NACD Hammer){7490}
Programming the Tool Control System in the Electronic Control Monitor for Using a Hammer on the Auxiliary Hydraulic Control System 11 Prime (NACD Shear){7490}
Programming the Tool Control System in the Electronic Control Monitor for Using a Hammer on the Auxiliary Hydraulic Control System 11 Prime (NACD Shear){7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation of Cat<SUP>&reg;</SUP> Terrain for Excavators{7605}
Installation of Cat® Terrain for Excavators{7605}
Installation of G610 Hardware for Cat<SUP>&reg;</SUP> Terrain for Excavators{7605}
Installation of G610 Hardware for Cat® Terrain for Excavators{7605}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Of Operator ID System on Cat<SUP>&reg;</SUP> and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Technical Information Bulletin
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Tool Operating Manual
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
New Monitor Software is Now Available {7490, 7620}
2002/08/26
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/09/11
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/12/10
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/22
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
New Phone Number for VIMS Support Is Now Available for All Cat<SUP>&reg;</SUP> Products Equipped with VIMS {7601}
2015/03/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
Specifications
Air Inlet Heater
3064 and 3066 Engines for Caterpillar Built Machines
Disassembly and Assembly
Air Inlet Heater - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
Block Heaters Are Now Available {1383}
2001/12/24
The Operation of the Heater Control for the Engine is Improved {1000, 1383}
2004/04/05
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Control Modules for Certain Machine Engines {1901, 7610}
2014/10/14
Service Letter-NACD
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
Service Letter-Australia
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
Service Letter-CFEL
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
Service Letter-CSARL
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
Service Letter-Americas
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
Service Letter-Truck/Ag/Marine
Service Letter-China
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
Service Letter-Asia
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
Service Letter-APD
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON ALL MACHINES EQUIPPED WITH PRODUCT LINK (PL121 AND PL321).
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE

Truck sale:

Caterpillar 312C L
 
Caterpillar 312C L
- Crawler Excavators
N C MACHINERY CO.
Caterpillar 312C L, Crawler Excavators, Construction
38,500 
Caterpillar 312C L, Crawler Excavators, Construction
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.
 
65,000 
Caterpillar 312CL THMB, Crawler Excavators, Construction


 
52,000 
Caterpillar 312CL, Crawler Excavators, Construction


Caterpillar 312CL, Crawler Excavators, Construction
44,500 
Caterpillar 312CL, Crawler Excavators, Construction

FOLEY, INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.