AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

325C L SUPPLEMENT FOR EXCAVATOR /STICK R4.2B/ BMM00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



EXCAVATOR 325C L EXCAVATOR BMM
 325C L SUPPLEMENT FOR EXCAVATOR /STICK R4.2B/ BMM00001-UP (MACHINE) XEBP8166 325C L BMM   (2001)

Parts group 325C L:

  For full view, you need register
HYDRAULIC SYSTEM
LINES GP-STICK
LINES GP-STICK
216-6495 LINES GP-STICK
2166495 LINES GP - STICK

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Specifications
Accumulator (Pilot)
325C Excavator Machine System Specifications
Accumulator (Pilot)
325C Excavator Machine System Specifications
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Systems Operation
Accumulator (Pilot)
325C Excavator Hydraulic System
Testing and Adjusting
Accumulator (Pilot) - Test and Charge
325C Excavator Hydraulic System
Disassembly and Assembly
Accumulator (Hydraulic Pilot) - Remove and Install
325C Excavator Machine Systems
Service Magazine
Procedure for Testing and Charging the Pilot System Accumulators {5077}
2003/05/05
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
A new Retainer and a new Adjuster Improve the Head Group on the Main Hydraulic Pump {5070, 5078}
2007/06/04
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Systems Operation
Negative Flow Control System
325C Excavator Hydraulic System
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 204-0890 COOLER ASSEMBLY ON CERTAIN 325C AND 325C L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 204-0890 COOLER ASSEMBLY ON CERTAIN 325C AND 325C L EXCAVATORS
Service Letter-CFEL
Service Letter-China
Service Letter-Asia
Systems Operation
Hydraulic Oil Cooler
325C Excavator Hydraulic System
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 204-0890 COOLER ASSEMBLY ON CERTAIN 325C AND 325C L EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 204-0890 COOLER ASSEMBLY ON CERTAIN 325C AND 325C L EXCAVATORS
Disassembly and Assembly
Hydraulic Oil Cooler - Remove
325C Excavator 3126B Engine Supplement
Hydraulic Oil Cooler - Install
325C Excavator 3126B Engine Supplement
Service Magazine
The Core Assembly in the Hydraulic Oil Cooler Is Improved {1374}
2004/03/15
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
The Oil Cooler Core Assembly Is Improved {1374}
2005/12/05
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE COUPLING FOR THE ENGINE AND THE MAIN HYDRAULIC PUMP ON CERTAIN 322C AND 325C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE COUPLING FOR THE ENGINE AND THE MAIN HYDRAULIC PUMP ON CERTAIN 322C AND 325C EXCAVATORS
Specifications
Pump Coupling
325C Excavator Machine System Specifications
Service Magazine
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
The Coupling for the Engine and the Main Hydraulic Pump Is Improved {5062, 5070}
2007/09/24
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}
Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
325C Excavator Machine System Specifications
Stick Cylinder
325C Excavator Machine System Specifications
Bucket Cylinder
325C Excavator Machine System Specifications
Boom Cylinder Lines
325C Excavator Machine System Specifications
Boom Lines
325C Excavator Machine System Specifications
Boom Lines
325C Excavator Machine System Specifications
Bucket Cylinder
325C Excavator Machine System Specifications
Bucket Cylinder
325C Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
325C Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Custom Service Information
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
325C Excavator Hydraulic System
Cylinder Drift - Check - Loaded Bucket
325C Excavator Hydraulic System
Cylinder Speed - Check
325C Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Stick Cylinder - Remove and Install
325C Excavator Machine Systems
Boom Cylinder - Remove and Install
325C Excavator Machine Systems
Bucket Cylinder - Remove and Install
325C Excavator Machine Systems
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Summary of the New Seals for Hydraulic Cylinder Rods {5456, 5457, 5458}
2003/11/17
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
The Straight Travel Control Spool Has Been Improved {5051, 5457}
2004/06/21
New Seals Are Available for the Prevention of Oil Leaks in Cold Temperature Conditions {5456, 5457, 5458}
2006/09/25
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Operation and Maintenance Manual
Swing Drive Oil - Change
325C Excavator
Swing Drive Oil Level - Check
325C Excavator
Swing Drive Oil Sample - Obtain
325C Excavator
Specifications
Fasteners - Swing Drive and Final Drive
325C Excavator Machine System Specifications
Swing Drive
325C Excavator Machine System Specifications
Systems Operation
Swing Drive
325C Excavator Hydraulic System
Disassembly and Assembly
Swing Drive - Disassemble
325C Excavator Machine Systems
Swing Drive - Remove
325C Excavator Machine Systems
Swing Drive - Install
325C Excavator Machine Systems
Swing Motor - Disassemble
325C Excavator Machine Systems
Swing Motor - Assemble
325C Excavator Machine Systems
Swing Drive - Assemble
325C Excavator Machine Systems
Service Magazine
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
Improved Breather Assemblies for the Swing Drives Are Available {5459}
2006/09/11
A New Tool for the Installation of the Lip Type Seals on the Swing Drive Prevents Damage of the Seals {5459}
2008/08/11
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
Operation and Maintenance Manual
Oil Filter - Inspect
325C Excavator
Hydraulic System Oil Filter (Return) - Replace
325C Excavator
Hydraulic System Oil Filter (Case Drain) - Replace
325C Excavator
Hydraulic System Oil Filter (Pilot) - Replace
325C Excavator
Special Instruction
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Technical Information Bulletin
The Oil Filter Base Assembly For The Case Drain Filter May Be Installed Incorrectly On Certain Excavators{5068, 5091}
The Oil Filter Base Assembly For The Case Drain Filter May Be Installed Incorrectly On Certain Excavators{5068, 5091}
Specifications
Oil Filter (Return)
325C Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Hydraulic Filter (Pilot)
325C Excavator Hydraulic System
Hydraulic Tank and Filter
325C Excavator Hydraulic System
Oil Filter (Return) - Case Drain Filter
325C Excavator Hydraulic System
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Oil Filter and Base - Remove and Install
325C Excavator Machine Systems
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2007/12/17
An Improved Oil Filter Group for the Case Drain Filter Is Available {5056, 5068, 5091}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Technical Information Bulletin
Incorrect Setting of the Timer Relay for the Generator Soft Start Solenoid{4450, 7610}
Incorrect Setting of the Timer Relay for the Generator Soft Start Solenoid{4450, 7610}
Service Magazine
A New Relief Valve Group for the Fan Pump Is Now Available on Certain 325C Excavators {5050, 5117}
A New Relief Valve Group for the Fan Pump Is Now Available on Certain 325C Excavators {5050, 5117}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Auxiliary Hydraulic Lines - Stick 2000 mm (79 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 3200 mm (126 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 2500 mm (98 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 2650 mm (104 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 3000 mm (118 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 3200 mm (126 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 2500 mm (98 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 2650 mm (104 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 3000 mm (118 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Reach Boom
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Mass Boom
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Reach Boom
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Mass Boom
325C Excavator Machine System Specifications
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Improvements Have Been Made to Bulk Hose for Certain Caterpillar Products {5057}
2010/03/24
Specifications
Auxiliary Hydraulic Lines - Stick 2000 mm (79 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 3200 mm (126 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 2500 mm (98 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 2650 mm (104 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 3000 mm (118 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 3200 mm (126 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 2500 mm (98 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 2650 mm (104 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Stick 3000 mm (118 inch)
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Reach Boom
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Mass Boom
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Reach Boom
325C Excavator Machine System Specifications
Auxiliary Hydraulic Lines - Mass Boom
325C Excavator Machine System Specifications
Troubleshooting
MID 06A - CID 1522 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1522 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1522 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1523 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1523 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1523 - FMI 06
320C, 322C and 325C Excavators Tool Control System
Service Magazine
New Hose Assemblies Increase the Reliability and Durability in the Hydraulic Lines Groups {5057}
2003/07/14
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Specifications
Boom Cylinder Lines
325C Excavator Machine System Specifications
Boom Lines
325C Excavator Machine System Specifications
Boom Lines
325C Excavator Machine System Specifications
Service Magazine
New Hose Assemblies Increase the Reliability and Durability in the Hydraulic Lines Groups {5057}
2003/07/14
Specifications
Bucket Cylinder Lines
325C Excavator Machine System Specifications
Bucket Cylinder Lines
325C Excavator Machine System Specifications
Bucket Cylinder Lines
325C Excavator Machine System Specifications
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Special Instruction
Installation of the 355-2448, 355-2449, 355-2450 Coupler Lines Gp {5057, 6129}
Installation of the 355-2448, 355-2449, 355-2450 Coupler Lines Gp {5057, 6129}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
The Center-Lock Hydraulic Pin Grabber Quick Couplers Have Specific Hydraulic Requirements {6129}
2010/04/15
Reuse And Salvage Guidelines
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Thermal Spray Procedures for Linkage Pins {0679, 5457, 6052, 6108, 6129, 6501, 6502}
Service Magazine
New Hose Assemblies Increase the Reliability and Durability in the Hydraulic Lines Groups {5057}
2003/07/14
The Pressure Sensors for the Main Hydraulic Pump and the Coil for the Refrigerant Compressor are Improved {1408, 1802, 5057, 5059, 5456}
2004/06/21
A New Pressure Sensor is Now Available for Certain Excavators {5057, 5059, 5456}
2011/12/07
Technical Information Bulletin
Oil May Leak From The Flange For The Supply Hose In The Front Lines Group On Certain Excavators
Oil May Leak From The Flange For The Supply Hose In The Front Lines Group On Certain Excavators
Specifications
Front Lines
325C Excavator Machine System Specifications
Troubleshooting
MID 06A - CID 1522 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1522 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1522 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1523 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1523 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1523 - FMI 06
320C, 322C and 325C Excavators Tool Control System
Service Magazine
New Hose Assemblies Increase the Reliability and Durability in the Hydraulic Lines Groups {5057}
2003/07/14
The Pressure Sensors for the Main Hydraulic Pump and the Coil for the Refrigerant Compressor are Improved {1408, 1802, 5057, 5059, 5456}
2004/06/21
An Improved Solenoid and Relief Valve is Available for Auxiliary Lines {5051, 5057}
2004/04/12
Troubleshooting Procedures for the Control Panel {1408, 1802, 5057, 5258, 5479, 7490}
2006/02/06
Improved Check Valves Are Available {5057, 5067}
2007/10/01
A New Pressure Sensor is Now Available for Certain Excavators {5057, 5059, 5456}
2011/12/07
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND NEEDLE VALVE IN THE HYDRAULIC SYSTEM, AND FLASHING NEW MACHINE SOFTWARE ON CERTAIN 322C, 325C, M325C, 330C, 330C L EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES IN ORDER TO PREVENT HYDRAULIC OIL OVERCOOLING
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND NEEDLE VALVE IN THE HYDRAULIC SYSTEM, AND FLASHING NEW MACHINE SOFTWARE ON CERTAIN 322C, 325C, M325C, 330C, 330C L EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES IN ORDER TO PREVENT HYDRAULIC OIL OVERCOOLING
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Bucket Cylinder Lines
325C Excavator Machine System Specifications
Bucket Cylinder Lines
325C Excavator Machine System Specifications
Bucket Cylinder Lines
325C Excavator Machine System Specifications
Pilot Lines - Front
325C Excavator Machine System Specifications
Pilot Lines - Rear
325C Excavator Machine System Specifications
Return and Oil Filter Lines
325C Excavator Machine System Specifications
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND NEEDLE VALVE IN THE HYDRAULIC SYSTEM, AND FLASHING NEW MACHINE SOFTWARE ON CERTAIN 322C, 325C, M325C, 330C, 330C L EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES IN ORDER TO PREVENT HYDRAULIC OIL OVERCOOLING
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND NEEDLE VALVE IN THE HYDRAULIC SYSTEM, AND FLASHING NEW MACHINE SOFTWARE ON CERTAIN 322C, 325C, M325C, 330C, 330C L EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES IN ORDER TO PREVENT HYDRAULIC OIL OVERCOOLING
Service Letter-Asia
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND NEEDLE VALVE IN THE HYDRAULIC SYSTEM, AND FLASHING NEW MACHINE SOFTWARE ON CERTAIN 322C, 325C, M325C, 330C, 330C L EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES IN ORDER TO PREVENT HYDRAULIC OIL OVERCOOLING
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CHECK VALVE AND NEEDLE VALVE IN THE HYDRAULIC SYSTEM, AND FLASHING NEW MACHINE SOFTWARE ON CERTAIN 322C, 325C, M325C, 330C, 330C L EXCAVATORS, MATERIAL HANDLERS, AND FOREST MACHINES IN ORDER TO PREVENT HYDRAULIC OIL OVERCOOLING
Testing and Adjusting
Accumulator (Pilot) - Test and Charge
325C Excavator Hydraulic System
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Specifications
Hydraulic Fan Drive Lines
325C Excavator Machine System Specifications
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Specifications
Accumulator (Pilot)
325C Excavator Machine System Specifications
Accumulator (Pilot)
325C Excavator Machine System Specifications
Shuttle Valve (Pilot Lines)
325C Excavator Machine System Specifications
Pressure Reducing Valve (Boom and Stick Priority)
325C Excavator Machine System Specifications
Pilot Lines - Front
325C Excavator Machine System Specifications
Pilot Lines - Rear
325C Excavator Machine System Specifications
Shuttle Valve (Pilot Lines)
325C Excavator Machine System Specifications
Shuttle Valve (Pilot Lines)
325C Excavator Machine System Specifications
Service Magazine
The Pressure Sensors for the Main Hydraulic Pump and the Coil for the Refrigerant Compressor are Improved {1408, 1802, 5057, 5059, 5456}
2004/06/21
New Supports Protect the Hose Assemblies in the Pilot Lines Group {5057, 5258}
2006/01/02
A New Pressure Switch Improves the Reliability of the Automatic Engine Speed Control {5057, 5059}
2008/07/14
A New Pressure Sensor is Now Available for Certain Excavators {5057, 5059, 5456}
2011/12/07
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE BOLTS ON THE MAIN PUMP SUCTION PIPE COVER MOUNTING ON CERTAIN 322C, 322C L, 325C, 325C L, 330C AND 330C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE BOLTS ON THE MAIN PUMP SUCTION PIPE COVER MOUNTING ON CERTAIN 322C, 322C L, 325C, 325C L, 330C AND 330C L EXCAVATORS
Service Letter-CFEL
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE BOLTS ON THE MAIN PUMP SUCTION PIPE COVER MOUNTING ON CERTAIN 322C, 322C L, 325C, 325C L, 330C AND 330C L EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE BOLTS ON THE MAIN PUMP SUCTION PIPE COVER MOUNTING ON CERTAIN 322C, 322C L, 325C, 325C L, 330C AND 330C L EXCAVATORS
Service Letter-Asia
Service Letter-APD
Service Magazine
New Hose Assemblies Increase the Reliability and Durability in the Hydraulic Lines Groups {5057}
2003/07/14
Specifications
Check Valve (Return Lines)
325C Excavator Machine System Specifications
Return and Oil Filter Lines
325C Excavator Machine System Specifications
Service Magazine
The Hoses in the Return Lines Group Are Improved {5057}
2003/12/22
The Hydraulic Hoses in the Return Lines Group Are Improved {5057}
2004/04/12
Specifications
Stick Lines
325C Excavator Machine System Specifications
Stick Lines - Quick Coupler
325C Excavator Machine System Specifications
Stick Lines
325C Excavator Machine System Specifications
Stick Lines
325C Excavator Machine System Specifications
Service Magazine
New Hose Assemblies Increase the Reliability and Durability in the Hydraulic Lines Groups {5057}
2003/07/14
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
New Hose Assemblies Increase the Reliability and Durability in the Hydraulic Lines Groups {5057}
2003/07/14
Specifications
Travel Motor Lines
325C Excavator Machine System Specifications
Service Magazine
New Hose Assemblies Increase the Reliability and Durability in the Hydraulic Lines Groups {5057}
2003/07/14
Special Instruction
Procedure to Rework the Quick Coupler Control Valve on Certain Excavators{5264, 5479}
Procedure to Rework the Quick Coupler Control Valve on Certain Excavators{5264, 5479}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 1970197 SPOOL FOR HYDRAULIC LOCK FUNCTION ON CERTAIN 312C, 315C, 318C, 320C, 321C, 322C, 325C AND 330C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 1970197 SPOOL FOR HYDRAULIC LOCK FUNCTION ON CERTAIN 312C, 315C, 318C, 320C, 321C, 322C, 325C AND 330C EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Control Manifold (Pilot Oil)
325C Excavator Machine System Specifications
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 1970197 SPOOL FOR HYDRAULIC LOCK FUNCTION ON CERTAIN 312C, 315C, 318C, 320C, 321C, 322C, 325C AND 330C EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 1970197 SPOOL FOR HYDRAULIC LOCK FUNCTION ON CERTAIN 312C, 315C, 318C, 320C, 321C, 322C, 325C AND 330C EXCAVATORS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Control Manifold (Pilot Oil) - Disassemble - NFC Limit Valve
325C Excavator Machine Systems
Control Manifold (Pilot Oil) - Remove - NFC Limit Valve
325C Excavator Machine Systems
Control Manifold (Pilot Oil) - Install - NFC Limit Valve
325C Excavator Machine Systems
Control Manifold (Pilot Oil) - Remove
325C Excavator Machine Systems
Control Manifold (Pilot Oil) - Install
325C Excavator Machine Systems
Control Manifold (Pilot Oil) - Disassemble
325C Excavator Machine Systems
Control Manifold (Pilot Oil) - Assemble
325C Excavator Machine Systems
Service Magazine
An Aluminum Pilot Oil Manifold Valve Gp is Available for Certain Excavators {5264}
2011/01/17
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Travel Motor
325C Excavator Machine System Specifications
Travel Motor Guard
325C Excavator Machine System Specifications
Travel Counterbalance Valve
325C Excavator Machine System Specifications
Fasteners - Swing Drive and Final Drive
325C Excavator Machine System Specifications
Swing Motor
325C Excavator Machine System Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Travel Motor
325C Excavator Hydraulic System
Displacement Change Valve
325C Excavator Hydraulic System
Swing Motor
325C Excavator Hydraulic System
Travel Counterbalance Valve
325C Excavator Hydraulic System
Swing Hydraulic System
325C Excavator Hydraulic System
Gear Pump (Fan Motor)
325C Excavator Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Machine Drift on a Slope - Check
325C Excavator Hydraulic System
Travel on Level Ground - Test
325C Excavator Hydraulic System
Travel on Level Ground - Test - Optional Test
325C Excavator Hydraulic System
Swing Speed and Overswing on Level Ground - Check
325C Excavator Hydraulic System
Swing Speed and Swing Drift on a Slope - Check
325C Excavator Hydraulic System
Relief Valve (Crossover) - Test and Adjust
325C Excavator Hydraulic System
Fan Motor Speed (Hydraulic Oil Cooler) - Test and Adjust
325C Excavator Hydraulic System
Swing Motor - Test - Measurement of Case Drain Oil
325C Excavator Hydraulic System
Travel Motor - Test - Measurement of Case Drain Oil
325C Excavator Hydraulic System
Fan Motor (Hydraulic Oil Cooler) - Test - Measurement of Case Drain Oil
325C Excavator Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Motors{4351, 5058}
Bench Test Procedure for Hydraulic Piston Motors{4351, 5058}
Disassembly and Assembly
Travel Motor - Assemble
325C Excavator Machine Systems
Swing Motor - Remove
325C Excavator Machine Systems
Swing Motor - Install
325C Excavator Machine Systems
Swing Motor - Disassemble
325C Excavator Machine Systems
Swing Motor - Assemble
325C Excavator Machine Systems
Piston Motor (Hydraulic Fan) - Disassemble
325C Excavator Machine Systems
Piston Motor (Hydraulic Fan) - Assemble
325C Excavator Machine Systems
Piston Motor (Hydraulic Fan) - Remove
325C Excavator Machine Systems
Piston Motor (Hydraulic Fan) - Install
325C Excavator Machine Systems
Travel Motor - Remove
325C Excavator Machine Systems
Travel Motor - Disassemble
325C Excavator Machine Systems
Travel Motor - Install
325C Excavator Machine Systems
Service Magazine
Improved Travel Motors Have an Increased Service Life {4351, 5058}
2003/01/20
Hour Meter Reading for the Travel Motor Is Now Available {1408, 4351, 7610}
2002/12/23
Remanufactured Improved Travel Motors With Increased Service Life Are Now Available {5058}
2003/11/24
New Remanufactured Travel Motors are now Available {5058}
2004/02/23
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE COUPLING FOR THE ENGINE AND THE MAIN HYDRAULIC PUMP ON CERTAIN 322C AND 325C EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE COUPLING FOR THE ENGINE AND THE MAIN HYDRAULIC PUMP ON CERTAIN 322C AND 325C EXCAVATORS
Specifications
Main Hydraulic Pump
325C Excavator Machine System Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Solenoid Valve (Proportional Reducing) - Power Shift System
325C Excavator Hydraulic System
Main Hydraulic Pump
325C Excavator Hydraulic System
Pump Control (Main Hydraulic) - Main Pump Regulator
325C Excavator Hydraulic System
Negative Flow Control System
325C Excavator Hydraulic System
Gear Pump (Pilot)
325C Excavator Hydraulic System
Gear Pump (Fan Motor)
325C Excavator Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Pump Control (Negative Flow) - Adjust
325C Excavator Hydraulic System
Main Hydraulic Pump Air - Purge
325C Excavator Hydraulic System
Swing Speed and Overswing on Level Ground - Check
325C Excavator Hydraulic System
Swing Speed and Swing Drift on a Slope - Check
325C Excavator Hydraulic System
Main Pump (Flow) - Test - Constant Horsepower Flow Control
325C Excavator Hydraulic System
Pump Control (Output Flow) - Adjust
325C Excavator Hydraulic System
Gear Pump (Fan Motor) - Test
325C Excavator Hydraulic System
Gear Pump (Pilot) - Test
325C Excavator Hydraulic System
Pump Control (Negative Flow) - Test
325C Excavator Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Pump Control - Remove
325C Excavator Machine Systems
Pump Control - Install
325C Excavator Machine Systems
Pump Control - Disassemble
325C Excavator Machine Systems
Pump Control - Assemble
325C Excavator Machine Systems
Main Hydraulic Pump - Disassemble
325C Excavator Machine Systems
Main Hydraulic Pump - Remove
325C Excavator Machine Systems
Main Hydraulic Pump - Install
325C Excavator Machine Systems
Gear Pump (Pilot and Auxiliary) - Remove
325C Excavator Machine Systems
Gear Pump (Pilot and Auxiliary) - Install
325C Excavator Machine Systems
Gear Pump (Pilot and Auxiliary) - Disassemble
325C Excavator Machine Systems
Gear Pump (Pilot and Auxiliary) - Assemble
325C Excavator Machine Systems
Main Hydraulic Pump - Assemble
325C Excavator Machine Systems
Service Magazine
Vibration in the Main Hydraulic Pump Is Eliminated {5070}
2003/02/10
The Main Hydraulic Pump is Improved {5070}
2004/07/05
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
The Coupling for the Engine and the Main Hydraulic Pump Is Improved {5062, 5070}
2007/09/24
Improved Manufacturing Process for the Main Pump Actuator (Regulator) {5070, 5078}
2005/06/27
Orifices Are Available for a Worn Bore in the Pump Actuator {5070, 5078}
2006/07/31
A new Retainer and a new Adjuster Improve the Head Group on the Main Hydraulic Pump {5070, 5078}
2007/06/04
Preventing Oil Leaks from the Pressure Sensors on the Main Hydraulic Pump {5057, 5070}
2007/04/02
A New Gear Pump Group (MEDIUM PRESSURE) is Now Used on Certain Excavators {5073}
2010/06/24
A New Seal for the Main Pump is Used on Certain Excavators and Mobile Hydraulic Power Units {5070}
2012/11/29
New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073}
New Hydraulic Pump Pressure Plates are Now Available for Certain Excavators and Wheeled Excavators {5073}
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/08/19
Systems Operation
Swivel
325C Excavator Hydraulic System
Disassembly and Assembly
Swivel - Disassemble
325C Excavator Machine Systems
Swivel - Assemble
325C Excavator Machine Systems
Swivel - Remove
325C Excavator Machine Systems
Swivel - Install
325C Excavator Machine Systems
Service Magazine
New Hose Assemblies Increase the Reliability and Durability in the Hydraulic Lines Groups {5057}
2003/07/14
Operation and Maintenance Manual
Hydraulic System Oil Level - Check
325C Excavator
Hydraulic System Oil - Change
325C Excavator
Hydraulic Tank Screen - Clean
325C Excavator
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL LEVEL SENSORS FOR ENGINE OIL AND HYDRAULIC OIL ON CERTAIN 320C, 325C, 325C L, 330C AND 330C L
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL LEVEL SENSORS FOR ENGINE OIL AND HYDRAULIC OIL ON CERTAIN 320C, 325C, 325C L, 330C AND 330C L
Service Letter-CFEL
Technical Information Bulletin
The 227-0620 Sight Gauge Gp Leaks on 300 Series Hydraulic Excavators{7479}
The 227-0620 Sight Gauge Gp Leaks on 300 Series Hydraulic Excavators{7479}
Specifications
Hydraulic Tank and Filter
325C Excavator Machine System Specifications
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL LEVEL SENSORS FOR ENGINE OIL AND HYDRAULIC OIL ON CERTAIN 320C, 325C, 325C L, 330C AND 330C L
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL LEVEL SENSORS FOR ENGINE OIL AND HYDRAULIC OIL ON CERTAIN 320C, 325C, 325C L, 330C AND 330C L
Service Letter-Asia
Systems Operation
Hydraulic Tank and Filter
325C Excavator Hydraulic System
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL LEVEL SENSORS FOR ENGINE OIL AND HYDRAULIC OIL ON CERTAIN 320C, 325C, 325C L, 330C AND 330C L
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL LEVEL SENSORS FOR ENGINE OIL AND HYDRAULIC OIL ON CERTAIN 320C, 325C, 325C L, 330C AND 330C L
Disassembly and Assembly
Hydraulic Tank - Remove
325C Excavator Machine Systems
Hydraulic Oil Tank - Install
325C Excavator Machine Systems
Service Magazine
The Oil Level Switch for the Engine Oil and for the Hydraulic Oil Is Improved {1302, 5056, 7422}
2011/08/03
Cap Assemblies Eliminate Need to Drain Hydraulic Tank During System Service {0738}
2004/03/08
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
An Improved Oil Filter Group for the Case Drain Filter Is Available {5056, 5068, 5091}
2007/04/02
Investigation of the Liquid Level Switch on the Engine Oil Pan and on the Hydraulic Tank for Excavators {1302, 1408, 5056, 5068, 7422}
2006/11/13
An Improved Temperature Sender for the Hydraulic Tank is Available for Excavators {5056}
2009/10/06
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
Cap Assemblies Eliminate Need to Drain Hydraulic Tank During System Service {0738}
2004/03/08
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Special Instruction
Installation of a Four-Way Pilot Valve Group (Control Pattern Change) {5059}
Installation of a Four-Way Pilot Valve Group (Control Pattern Change) {5059}
Service Magazine
Special Instruction, REHS1270, "Installation of a Four-Way Pilot Valve Group (Control Pattern Change)" Is Available {5050, 5059}
2002/05/06
Disassembly and Assembly
Control Valve (Auxiliary) - Disassemble - F2 and F3 Auxiliary Control Valve
325C Excavator Machine Systems
Control Valve (Auxiliary) - Assemble - F2 and F3 Auxiliary Control Valve
325C Excavator Machine Systems
Control Valve (Auxiliary) - Remove - F2 and F3 Auxiliary Control Valves
325C Excavator Machine Systems
Control Valve (Auxiliary) - Install - F2 and F3 Auxiliary Control Valves
325C Excavator Machine Systems
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Systems Operation
Pilot Valve (Swing Parking Brake)
325C Excavator Hydraulic System
Bypass Valve (Return) - Bypass Check Valve
325C Excavator Hydraulic System
Check Valve (Load)
325C Excavator Hydraulic System
Check Valve (Return Makeup) - Slow Return Check Valve
325C Excavator Hydraulic System
Troubleshooting
MID 06A - CID 1522 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1522 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1522 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1523 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1523 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1523 - FMI 06
320C, 322C and 325C Excavators Tool Control System
Service Magazine
Improved Check Valves Are Available {5057, 5067}
2007/10/01
Troubleshooting
MID 06A - CID 1615 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1615 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1615 - FMI 06
320C, 322C and 325C Excavators Tool Control System
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUGS IN THE MAIN CONTROL VALVE ON CERTAIN 320C/CL, 325C/CL AND 330C/CL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUGS IN THE MAIN CONTROL VALVE ON CERTAIN 320C/CL, 325C/CL AND 330C/CL EXCAVATORS
Service Letter-CFEL
Technical Information Bulletin
Plug Loosening And Oil Leaking From The Main Hydraulic Control Valve
Plug Loosening And Oil Leaking From The Main Hydraulic Control Valve
Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}
Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}
Specifications
Pilot Valve (Joystick)
325C Excavator Machine System Specifications
Control Valve (Main)
325C Excavator Machine System Specifications
Control Valve (Boom Lowering)
325C Excavator Machine System Specifications
Control Valve (Boom Lowering)
325C Excavator Machine System Specifications
Pilot Valve (Auxiliary)
325C Excavator Machine System Specifications
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUGS IN THE MAIN CONTROL VALVE ON CERTAIN 320C/CL, 325C/CL AND 330C/CL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUGS IN THE MAIN CONTROL VALVE ON CERTAIN 320C/CL, 325C/CL AND 330C/CL EXCAVATORS
Service Letter-Asia
Systems Operation
Pilot Valve (Joystick)
325C Excavator Hydraulic System
Main Control Valve
325C Excavator Hydraulic System
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUGS IN THE MAIN CONTROL VALVE ON CERTAIN 320C/CL, 325C/CL AND 330C/CL EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUGS IN THE MAIN CONTROL VALVE ON CERTAIN 320C/CL, 325C/CL AND 330C/CL EXCAVATORS
Disassembly and Assembly
Main Control Valve - Disassemble
325C Excavator Machine Systems
Main Control Valve - Assemble
325C Excavator Machine Systems
Main Control Valve - Remove
325C Excavator Machine Systems
Main Control Valve - Install
325C Excavator Machine Systems
Service Magazine
An Improved Cleaning Procedure Prevents Leaks From the Main Hydraulic Control Valve {5051}
2003/01/06
New Plugs for the Main Hydraulic Control Valve Are Available {5051}
2003/04/07
A New Main Control Valve Has Improved O-Ring Seal Plugs {5051}
2004/05/24
The Straight Travel Control Spool Has Been Improved {5051, 5457}
2004/06/21
A New Relief Valve Improves Controllability of the Boom and the Stick {5069, 5117}
2005/05/23
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
A New Swing Priority Valve is Now Available for Certain Excavators {5051, 506P}
2009/05/04
Disassembly and Assembly
Counterbalance Valve (Travel) - Remove
325C Excavator Machine Systems
Counterbalance Valve (Travel) - Install
325C Excavator Machine Systems
Counterbalance Valve (Travel) - Disassemble
325C Excavator Machine Systems
Counterbalance Valve (Travel) - Assemble
325C Excavator Machine Systems
Service Magazine
The Reliability of the Travel Counterbalance Valve in the Travel Motor Is Increased {5111, 5811}
2004/04/05
Disassembly and Assembly
Counterbalance Valve (Travel) - Remove
325C Excavator Machine Systems
Counterbalance Valve (Travel) - Install
325C Excavator Machine Systems
Counterbalance Valve (Travel) - Disassemble
325C Excavator Machine Systems
Counterbalance Valve (Travel) - Assemble
325C Excavator Machine Systems
Service Magazine
The Reliability of the Travel Counterbalance Valve in the Travel Motor Is Increased {5111, 5811}
2004/04/05
Specifications
Swing Cushion Valve
325C Excavator Machine System Specifications
Systems Operation
Relief Valve (Cushion Crossover) - Anti-Reaction Valves
325C Excavator Hydraulic System
Disassembly and Assembly
Swing Cushion Valve - Remove
325C Excavator Machine Systems
Swing Cushion Valve - Install
325C Excavator Machine Systems
Swing Cushion Valve - Disassemble - Fine Swing Solenoid
325C Excavator Machine Systems
Swing Cushion Valve - Assemble - Fine Swing Solenoid
325C Excavator Machine Systems
Service Magazine
A New Solenoid Valve Group for the Fine Swing Control Is Available {5479, 5480}
2008/07/28
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Systems Operation
Boom Drift Reduction Valve
325C Excavator Hydraulic System
Stick Drift Reduction Valve
325C Excavator Hydraulic System
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
325C Excavator Hydraulic System
Cylinder Drift - Check - Loaded Bucket
325C Excavator Hydraulic System
Disassembly and Assembly
Drift Reduction Valve (Stick) - Disassemble
325C Excavator Machine Systems
Drift Reduction Valve (Stick) - Assemble
325C Excavator Machine Systems
Drift Reduction Valve (Boom) - Remove
325C Excavator Machine Systems
Drift Reduction Valve (Boom) - Disassemble
325C Excavator Machine Systems
Drift Reduction Valve (Boom) - Assemble
325C Excavator Machine Systems
Drift Reduction Valve (Boom) - Install
325C Excavator Machine Systems
Drift Reduction Valve (Stick) - Remove
325C Excavator Machine Systems
Drift Reduction Valve (Stick) - Install
325C Excavator Machine Systems
Operation and Maintenance Manual
Joystick Controls Alternate Patterns
325C Excavator
Systems Operation
Negative Flow Control System
325C Excavator Hydraulic System
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Operation and Maintenance Manual
Hydraulic System Oil Sample - Obtain
325C Excavator
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Operation and Maintenance Manual
Equipment Lowering with Engine Stopped
325C Excavator
Specifications
Control Valve (Boom Lowering)
325C Excavator Machine System Specifications
Control Valve (Boom Lowering)
325C Excavator Machine System Specifications
Systems Operation
Check Valve (Load)
325C Excavator Hydraulic System
Control Valve (Boom Lowering)
325C Excavator Hydraulic System
Disassembly and Assembly
Boom Lowering Control Valve - Remove
325C Excavator Machine Systems
Boom Lowering Control Valve - Install
325C Excavator Machine Systems
Boom Lowering Control Valve - Disassemble
325C Excavator Machine Systems
Boom Lowering Control Valve - Assemble
325C Excavator Machine Systems
Service Magazine
New Pilot Valves With New Plugs Prevent Hydraulic Fluid Leaks {5067, 5117, 5147, 5811}
2004/10/11
The Load Control Valve (Drift Reduction Valve) for the Boom Is Improved {5067, 5117, 5147, 5811}
2005/05/16
Systems Operation
Oil Makeup (Swing System)
325C Excavator Hydraulic System
Oil Makeup (Travel System)
325C Excavator Hydraulic System
Check Valve (Return Makeup) - Slow Return Check Valve
325C Excavator Hydraulic System
Disassembly and Assembly
Relief Valve (Pilot) - Remove and Install
325C Excavator Machine Systems
Service Magazine
A New Valve Assembly for the Auxiliary Hydraulic Lines Group Is Available {1329}
2006/05/15
The Work Tool Ball Valve Can Seize on Certain Wheeled and Medium Hydraulic Excavators {1329, 5001, 5130}
2011/11/29
Special Instruction
Installation of a Four-Way Pilot Valve Group (Control Pattern Change) {5059}
Installation of a Four-Way Pilot Valve Group (Control Pattern Change) {5059}
Technical Information Bulletin
Installation Of A Four-Way Pilot Valve Group (Pattern Control Change)
Installation Of A Four-Way Pilot Valve Group (Pattern Control Change)
The Pilot Valve May Generate Noise And Not Operate Smoothly On Certain Excavators
The Pilot Valve May Generate Noise And Not Operate Smoothly On Certain Excavators
Specifications
Pilot Valve (Travel)
325C Excavator Machine System Specifications
Shuttle Valve (Pilot Lines)
325C Excavator Machine System Specifications
Pilot Valve (Joystick)
325C Excavator Machine System Specifications
Relief Valve (Pilot)
325C Excavator Machine System Specifications
Pilot Valve (Boom Drift Reduction)
325C Excavator Machine System Specifications
Pilot Valve (Stick Drift Reduction)
325C Excavator Machine System Specifications
Pilot Valve (Auxiliary)
325C Excavator Machine System Specifications
Shuttle Valve (Pilot Lines)
325C Excavator Machine System Specifications
Shuttle Valve (Pilot Lines)
325C Excavator Machine System Specifications
Systems Operation
Pilot Valve (Joystick)
325C Excavator Hydraulic System
Disassembly and Assembly
Pilot Valve (Joystick) - Remove
325C Excavator Machine Systems
Pilot Valve (Joystick) - Install
325C Excavator Machine Systems
Pilot Valve (Joystick) - Disassemble
325C Excavator Machine Systems
Pilot Valve (Joystick) - Assemble
325C Excavator Machine Systems
Service Magazine
Special Instruction, REHS1270, "Installation of a Four-Way Pilot Valve Group (Control Pattern Change)" Is Available {5050, 5059}
2002/05/06
Preventing Oil Leaks from the Seal in the Pilot Valve {5059, 5063, 5705}
2007/03/05
A New Pressure Switch Improves the Reliability of the Automatic Engine Speed Control {5057, 5059}
2008/07/14
Systems Operation
Relief Valve (Pilot)
325C Excavator Hydraulic System
Testing and Adjusting
Relief Valve (Pilot) - Test and Adjust
325C Excavator Hydraulic System
Systems Operation
Solenoid Valves
320C, 322C and 325C Excavators Tool Control System
Testing and Adjusting
System 14: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320C, 322C and 325C Excavators Tool Control System
System 14: Solenoid Valve (Proportional Reducing) - Calibrate - Attachment Control Valve
320C, 322C and 325C Excavators Tool Control System
System 3: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320C, 322C and 325C Excavators Tool Control System
System 1: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320C, 322C and 325C Excavators Tool Control System
System 2: Solenoid Valve (Proportional Reducing) - Calibrate - Negative Flow Control
320C, 322C and 325C Excavators Tool Control System
Troubleshooting
MID 069 - CID 1524 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1590 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1590 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1524 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1524 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 069 - CID 1590 - FMI 06
320C, 322C and 325C Excavators Tool Control System
Specifications
Pressure Reducing Valve (Boom and Stick Priority)
325C Excavator Machine System Specifications
Service Magazine
A New Swing Priority Valve is Now Available for Certain Excavators {5051, 506P}
2009/05/04
Technical Information Bulletin
A New Line Relief Valve Improves Controllability Of The Stick On Certain Excavators
A New Line Relief Valve Improves Controllability Of The Stick On Certain Excavators
Specifications
Relief Valve (Pilot)
325C Excavator Machine System Specifications
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Systems Operation
Relief Valve (Main)
325C Excavator Hydraulic System
Relief Valve (Line)
325C Excavator Hydraulic System
Relief Valve (Swing)
325C Excavator Hydraulic System
Custom Service Information
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Testing and Adjusting
Machine Drift on a Slope - Check
325C Excavator Hydraulic System
Relief Valve (Line) - Test and Adjust
325C Excavator Hydraulic System
System 14: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
320C, 322C and 325C Excavators Tool Control System
System 14: Relief Valve (Main) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
320C, 322C and 325C Excavators Tool Control System
System 14: Relief Valve (Line) - Test and Adjust - Number 1 Relief Valve and Number 2 Relief Valve
320C, 322C and 325C Excavators Tool Control System
System 3: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
320C, 322C and 325C Excavators Tool Control System
System 3: Relief Valve (Line) - Test and Adjust - Work Tool
320C, 322C and 325C Excavators Tool Control System
System 5: Relief Valve (Line) - Test and Adjust - Attachment Control Valve
320C, 322C and 325C Excavators Tool Control System
System 14: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
320C, 322C and 325C Excavators Tool Control System
System 1: Relief Valve (Line) - Test and Adjust - Work Tool
320C, 322C and 325C Excavators Tool Control System
System 2: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
320C, 322C and 325C Excavators Tool Control System
System 2: Relief Valve (Line) - Test and Adjust - Work Tool
320C, 322C and 325C Excavators Tool Control System
Relief Valve (Main) - Test and Adjust
325C Excavator Hydraulic System
Relief Valve (Crossover) - Test and Adjust
325C Excavator Hydraulic System
Relief Valve (Swing) - Test and Adjust
325C Excavator Hydraulic System
Troubleshooting
MID 06A - CID 1665 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1665 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1665 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1666 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1666 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1666 - FMI 06
320C, 322C and 325C Excavators Tool Control System
Disassembly and Assembly
Relief Valve (Pilot) - Remove and Install
325C Excavator Machine Systems
Service Magazine
A New Relief Valve Improves Controllability of the Boom and the Stick {5069, 5117}
2005/05/23
A New Relief Valve Prevents Noise and Vibration in the Main Hydraulic Control Valve {5069, 5117}
2008/12/01
The 229-3612 Valve Seat Tool Gp Is Available to Repair Line Relief Valve Seats {0738, 5117}
2012/01/19
A New Relief Valve Group for the Fan Pump Is Now Available on Certain 325C Excavators {5050, 5117}
A New Relief Valve Group for the Fan Pump Is Now Available on Certain 325C Excavators {5050, 5117}
Specifications
Relief Valve (Pilot)
325C Excavator Machine System Specifications
Shuttle Valve (Pilot Lines)
325C Excavator Machine System Specifications
Shuttle Valve (Pilot Lines)
325C Excavator Machine System Specifications
Shuttle Valve (Pilot Lines)
325C Excavator Machine System Specifications
Disassembly and Assembly
Shuttle Valve - Remove - Straight Travel
325C Excavator Machine Systems
Shuttle Valve - Disassemble - Straight Travel
325C Excavator Machine Systems
Shuttle Valve - Assemble - Straight Travel
325C Excavator Machine Systems
Shuttle Valve - Install - Straight Travel
325C Excavator Machine Systems
Service Magazine
A New Shuttle Valve Is Available {5079, 5705}
2010/02/23
Special Instruction
Procedure to Rework the Quick Coupler Control Valve on Certain Excavators{5264, 5479}
Procedure to Rework the Quick Coupler Control Valve on Certain Excavators{5264, 5479}
Systems Operation
Solenoid Valve (Proportional Reducing) - Power Shift System
325C Excavator Hydraulic System
Solenoid Valve (Hydraulic Lockout)
325C Excavator Hydraulic System
Solenoid Valves
320C, 322C and 325C Excavators Tool Control System
Testing and Adjusting
Proportional Reducing Valve - Calibrate - Power Shift
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Proportional Reducing Valve Sweep - Test - Power Shift
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Check of Proportional Reducing Valve - Troubleshoot - CID 581
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2
Troubleshooting
MID 06A - CID 1593 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1593 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1593 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1596 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1596 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1596 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1594 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1594 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1594 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1597 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1597 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1597 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1595 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1595 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1595 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1598 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1598 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1598 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1665 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1665 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1665 - FMI 06
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1666 - FMI 03
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1666 - FMI 05
320C, 322C and 325C Excavators Tool Control System
MID 06A - CID 1666 - FMI 06
320C, 322C and 325C Excavators Tool Control System
Disassembly and Assembly
Swing Cushion Valve - Remove
325C Excavator Machine Systems
Swing Cushion Valve - Install
325C Excavator Machine Systems
Swing Cushion Valve - Disassemble - Fine Swing Solenoid
325C Excavator Machine Systems
Swing Cushion Valve - Assemble - Fine Swing Solenoid
325C Excavator Machine Systems
Service Magazine
Troubleshooting Procedures for the Control Panel {1408, 1802, 5057, 5258, 5479, 7490}
2006/02/06
Improved Solenoid Valve Groups Are Available {5479}
2008/02/25
A New Solenoid Valve Group for the Fine Swing Control Is Available {5479, 5480}
2008/07/28
Systems Operation
Control Valve (Straight Travel)
325C Excavator Hydraulic System

Truck sale:

Caterpillar 325CL, Construction
71,254 
Caterpillar 325CL, Construction
- Crawler Excavators
FINNING CANADA
Canada
Caterpillar 325CL, Construction
59,000 
Caterpillar 325CL, Construction
- Crawler Excavators
HOLT CAT
Caterpillar 325CL, Construction
42,500 
Caterpillar 325CL, Construction
- Crawler Excavators
WHAYNE SUPPLY COMPANY
Caterpillar 325CL, Construction
59,000 
Caterpillar 325CL, Construction
- Crawler Excavators
ZIEGLER CAT
Caterpillar 325CL, Construction
62,500 
Caterpillar 325CL, Construction
- Crawler Excavators
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.