HOSE REEL (For telescopic stick) - Part 1 of 2 An Attachment E200B EXCAVATOR

SERVICE EQUIPMENT AND SUPPLIES

TOOLS

0. HOSE REEL
1. HOSE REEL

POWER TRAIN

DRIVE GP-FINAL

2. TRAVEL GEA
3. TRAVEL GEA
4. TRAVEL GEA
5. TRAVEL GEA

FRAME AND BODY

GEAR & BEARING GP

6. SWING GEAR
7. SWING GEAR
8. SWING GEAR
9. SWING GEAR
0. INFORMATION

EXCAVATOR E200B EXCAVATOR 6KF
E200B, EL200B TRACK-TYPE EXCAVATORS 6KF00001-UP (MACHINE) POWERED BY 3116 ENGINE XEBP9901 E200B 6KF (1988)

SERVICE EQUIPMENT AND SUPPLIES

TOOLS

TOOL KIT

HOSE REEL

#XEBP99010530

HOSE REEL

HOSE REEL (For telescopic stick) - Part 1 of 2
An Attachment

c942827 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1-49.	085-4654	[1]	HOSE REEL ASSY.
1.		[1]	BOLT
2.	096-4876	[1]	NUT
3.	085-4721	[2]	PLUG
4.	085-4722	[1]	STAND
5.	099-6964	[8]	BOLT
6.	096-6136	[8]	WASHER
7.	085-4723	[1]	RING
8.	085-4724	[1]	PIN
9.	085-4725	[1]	SPRING
10.	085-4726	[1]	DISC 1
11.	085-4727	[1]	DRUM 1
12.	085-4728	[4]	SPACER
13.	099-6892	[1]	RING
14.	085-4729	[1]	BEARING
15.	085-4730	[4]	RING
16.	095-1613	[3]	O-RING
17.	085-4731	[1]	90 degrees elbow
18.	085-4732	[1]	45 degree elbow
19.	095-1424	[1]	90 degrees elbow
20.	085-4733	[1]	HOUSING

#XEBP99010531

HOSE REEL

HOSE REEL (For telescopic stick) - Part 2 of 2
An Attachment

c942828 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
21.	085-4734	[1]	BEARING
22.	8T-9599	[1]	RING
23.	6V-5204	[1]	RING
24.	085-4735	[1]	HOSE
25.	085-4736	[1]	DRUM 2
26.	096-4874	[4]	NUT
27.	095-0816	[4]	WASHER, SPRING
28.	085-4737	[4]	SPACER
29.	095-0815	[16]	WASHER, SPRING
30.	096-4873	[8]	NUT
31.	085-4738	[1]	DISC 2
32.	8T-1158	[8]	BOLT
33.	8T-4186	[4]	BOLT
41-49.	085-4739	[1]	SPRING SET
	N		NOT SUPPLIED INDIVIDUALLY

#XEBP99010532

TRAVEL GEAR

TRAVEL GEAR - Part 1 of 4

c942829 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1-43.	096-6334	[1]	TRAVEL GEAR ASSY.
1-44.	099-3665	[1]	TRAVEL GEAR ASSY.
1.	096-5896	[1]	CASING
2.	096-4316	[10]	PIN
3.	096-1773 B		SHIM
	096-1774 B		SHIM
	096-1775 B		SHIM
	096-1776 B		SHIM
	096-1777 B		SHIM
	096-1778 B		SHIM
	096-1779 B		SHIM
	096-1780 B		SHIM
	096-1781 B		SHIM
4.	093-1425	[1]	SEAL, FLOATING
5.	096-6412	[2]	BEARING
6.	096-4325	[1]	CASING
7.	093-0479	[4]	PIN
8.	096-4318	[1]	COUPLING
9.	8T-4829	[18]	BOLT
10.	094-0608	[4]	SHAFT III
	B		USE AS REQUIRED

#XEBP99010533

TRAVEL GEAR

TRAVEL GEAR - Part 2 of 4

c942830 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
11.	094-0611	[8]	WASHER
12.	094-0616	[8]	BEARING
13.	094-1508	[4]	GEAR III
14.	095-0886	[7]	PIN
15.	096-4323	[1]	CARRIER III
16.	094-0576	[1]	PLATE
17.	094-1513	[1]	GEAR III
18.	096-3840	[1]	GEAR III
19.	094-1510	[3]	SHAFT II
20.	094-1507	[3]	GEAR II
21.	094-1516	[3]	BEARING
22.	094-1514	[1]	CARRIER II
23.	093-1730	[2]	RING
24.	096-0583	[1]	GEAR II
25.	096-4321	[1]	CARRIER I
26.	094-0589	[6]	WASHER
27.	096-4320	[3]	GEAR I
28.	094-1519	[3]	BEARING
29.	096-0433	[3]	RING
30.	095-0650	[8]	BOLT

#XEBP99010534

TRAVEL GEAR

TRAVEL GEAR - Part 3 of 4

c942831 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
31.	096-4317	[1]	GEAR I
32.	094-0597	[1]	COUPLING
33.	096-4319	[1]	GEAR I
34.	094-0577 C		PLATE
	094-0578 C		PLATE
	094-0579 C		PLATE
	094-0580 C		PLATE
35.	094-1515	[1]	COVER
	099-3666	[1]	COVER
	099-3667	[1]	COVER
36.	095-0968	[2]	PLUG
	096-0016	[2]	PLUG
	099-4599	[2]	PLUG
36A.	096-0016	[1]	PLUG
	095-0968	[1]	PLUG
37.	093-0391	[16]	WASHER
38.	093-0173	[16]	BOLT
39.	094-0612	[2]	SPACER
40.	094-1512	[1]	GEAR II
41.	094-0584	[6]	WASHER
	C		INDICATES CHANGE

#XEBP99010535

TRAVEL GEAR

TRAVEL GEAR - Part 4 of 4

c942832 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
42.	093-0537	[2]	PLUG
43.	096-4324	[1]	SPACER
44.	095-1596	[2]	O-RING

#XEBP99010536

SWING GEAR

SWING GEAR - Part 1 of 2

c942833 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1-35.	099-3553	[1]	SWING GEAR ASSY.
1.	094-0584	[6]	WASHER
2.	094-1516	[3]	BEARING
3.	094-1507	[3]	GEAR
4.	095-0886	[7]	PIN
5.	096-5899	[3]	SHAFT
6.	093-0238	[1]	BOLT
7.	099-1103	[1]	RETAINER
8.	099-3785 C		SHIM
	099-3786 C		SHIM
	099-3787 C		SHIM
	099-3788 C		SHIM
9.	099-3789	[1]	GEAR
10.	093-1729	[2]	RING
11.	099-3790	[1]	CARRIER
12.	096-2048	[1]	GEAR
	085-8259	[1]	GEAR
13.	099-3791	[1]	GEAR
14.	099-3792	[3]	SHAFT
15.	099-3793	[1]	CARRIER
17.	094-1535	[3]	GEAR
	C		INDICATES CHANGE

#XEBP99010537

SWING GEAR

SWING GEAR - Part 2 of 2

c942834 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
18.	099-3794	[1]	CASING
19.	096-4339	[1]	BEARING
20.	096-4333	[1]	PEACE
21.	095-9825	[1]	PIPE
22.	094-1530	[1]	90 degrees ELBOW
23.	095-0969	[1]	PLUG
24.	095-1022	[1]	BEARING
25.	096-4335	[2]	SEAL
26.	096-4336	[1]	COVER
27.	8T-4183	[6]	BOLT
28.	099-1102	[1]	SHAFT
29.	099-3795	[1]	COVER
30.	7X-2559	[16]	BOLT
31.	099-1104	[1]	WASHER
32.	094-1528	[6]	WASHER
33.	094-1542	[6]	BEARING
34.	099-3668	[6]	WASHER
	7X-0622	[6]	WASHER
35.	096-5861	[16]	WASHER

#XEBP99010538

SWING GEAR

SWING GEAR (For rotating grapple) - Part 1 of 2
An Attachment

c942835 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1-30.	096-7499	[1]	SWING GEAR ASSY.
1.	096-7517	[8]	BOLT
2.	096-7516	[8]	WASHER, SPRING
3.	096-7520	[1]	COVER
4.	096-7505	[2]	O-RING
5.	096-7506	[4]	PIN
6.	096-7502	[1]	GEAR
7.	096-7521	[1]	PLUG
8.	096-7519	[1]	GEAR
9.	096-7500	[1]	HOLDER
10.	095-0967	[1]	PLUG
11.	095-1674	[1]	O-RING
12.	096-7504	[1]	RING
13.	096-7503	[1]	GEAR
14.	096-7507	[1]	WASHER
15.	096-7501	[1]	SHAFT
16.	095-1003	[1]	BEARING
17.	096-7518	[1]	CASING
18.	095-0968	[2]	PLUG
19.	096-7514	[1]	COVER
20.	095-1012	[1]	BEARING

#XEBP99010539

SWING GEAR

SWING GEAR (For rotating grapple) - Part 2 of 2
An Attachment

c942836 XEBP9901

For full view, you need register

Parts for your E200B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
21.	095-1678	[1]	O-RING
22.	093-3018	[1]	SEAL
23.	096-7510	[1]	O-RING
24.	096-7509	[1]	COLLAR
25.	096-7515	[1]	COVER
26.	096-7523	[5]	BOLT
27.	096-7508	[1]	PINION
28.	096-7511	[1]	PLATE
29.	096-7512	[1]	WASHER
30.	096-7513	[3]	BOLT

Information:

SERVICE EQUIPMENT AND SUPPLIES

TOOLS

Truck Engine News

Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29

Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27

New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01

Engine News

The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/01

Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29

Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/01

Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16

277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10

Special Instruction

Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}

An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Technical Information Bulletin

Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}

Tool Operating Manual

348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}

358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Compact DPF Cleaner{0599, 0701, 0702, 108F}
Compact DPF Cleaner{0599, 0701, 0702, 108F}

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}

142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}

Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}

284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}

284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}

284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}

185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}

Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}

Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}

456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}

Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

Reuse And Salvage Guidelines

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Bench Test Procedures

Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}

Service Magazine

Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11

Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11

New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03

USB Cable Connects PC with USB Ports to Communication Adapter or to DataView Tool Group {0785, 0788}
2004/03/15

Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29

Cat Service Tools Releases New Hose Cutting Machine {0678, 0684}
2004/03/29

Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31

New Pry Bars Have Striking Caps on Handles {0607}
2004/04/01

Twist Impact Sockets Grip Fasteners as Torque is Applied {0601}
2004/03/29

249-2813 Water Filter Gp is Available for Shop Applications that Require Water Filtration {0699}
2004/07/05

210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770}
2004/07/01

243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05

Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2005/01/17

Lockout Valves Shut Off Air Supply in the Service Shop {0699}
2005/04/25

Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27

Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29

Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12

Shop Chemicals are now Listed in Cat Shop Supplies and Hand Tools {0599, 0644, 0645}
2005/12/12

Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13

Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23

Disposable Dessicant Filter is Now Available {0618, 0646}
2006/02/13

New Kits Are Available to Repair Cracks and Threads in Ductile Iron {0676, 0685}
2006/02/06

Slide Sledge Heavy Equipment Repair Tools Are Now Available {0599, 0644}
2006/04/17

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/01

New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/10/01

Use Only Cleaning Agents that are Water Based with the 212-1503 Parts Washer Kit {0680}
2006/10/02

277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22

Increased Support for Repair Parts is Available for Products that are sold by Dealer Service Tools from Advanced Technology Services {0599}
2008/04/14

Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05

A New Backing Pad Is Available for the 127 mm (5 inch) Rotary Grinding Disc {0674, 0677, 0685}
2009/10/19

Component Cleaners That Contain Trichloroethylene (TCE) Must Not Be Used On Electrical Connectors {0709}
2010/02/22

Changes to the Usage and Cleaning of the Contamination Monitor Group {0645, 0680, 1280, 1348, 3080, 429F, 5095}
2010/09/01

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Caterpillar Parts SIS Catalog E200B :

GRAPPLE-ROTATING TYPE

Truck sale:

USD $21,000

CAT E200B

Shanghai Advanced Machinery Co.,Ltd
Shanghai, Shanghai, China

USD $28,500

1988 CAT E200B

Compass Equipment
Atlanta, Georgia

CAT E200B

BLOUNT PARTS & EQUIPMENT

USD $18,000

1997 CAT E200B

MHJ Heavy Equipment Trading Co.

USD $18,000

1996 CAT E200B

MHJ Heavy Equipment Trading Co.