AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

GOVERNOR AND FUEL INJECTION PUMP (6N5228 N/S) Part of 6N5227 Governor and Fuel Injection Pump Group shown on Page 102 Governor and Fuel Injection Pump and Torque Control parts are shown on Pages 104 through 107 D6C


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
LINES GP-FUEL INJECTION

TRACK-TYPE TRACTOR D6C TRACK-TYPE TRACTOR 26K
 D6C TRACTOR / DIRECT DRIVE / 26K01145-UP (MACHINE) POWERED BY 3306 ENGINE XMBP9509 D6C 26K   (1968)

FUEL SYSTEM

GOVERNOR GP
7S-9333 GOVERNOR GROUP
6N-5227 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5228 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5355 GOV & FUEL INJ PUMP GP
6N-5355 GOV & FUEL INJ PUMP GP
6N-5355 GOV & FUEL INJ PUMP GP
 

#XMBP95090170
 

6N-5228: GOV & FUEL INJ PUMP GP

GOVERNOR AND FUEL INJECTION PUMP (6N5228 N/S)
Part of 6N5227 Governor and Fuel Injection Pump Group shown on Page 102
Governor and Fuel Injection Pump and Torque Control parts are shown on Pages 104
through 107
j13284e XMBP9509
6N5228 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-4710 [2] BOLT (101.6mm Long)  
2. 4N-0053 [1] COVER  
3. 0S-1616 [1] BOLT (25.5mm Long)  
4. 4N-4366 [1] SPRING  
5. 4N-4320 [1] SHAFT ASSEM.  
6. 4N-0443 [1] PIN  
7. Y [1] FUEL INJECTION PUMP  
    (See Separate Illustration)
8. 6D-0238 [1] VALVE ASSEM.  
9. 0S-1615 [10] BOLT  
10. 9S-4180 [1] PLUG (Drain)  
  4J-7533 [1] SEAL  
11. 4N-9339 [1] COVER  
  4N-9057 [1] GASKET  
12. 6N-5170 [1] SPRING  
13. 4N-8179 [1] PIN  
14. 4N-0444 [2] SPACER  
15. 4N-0159 [1] GASKET  
16. Y [1] TORQUE CONTROL  
    (See Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#XMBP95090171
 

6N-5355: GOV & FUEL INJ PUMP GP

GOVERNOR AND FUEL INJECTION PUMP (6N5355 N/S)--Part 1 of 3
Part of Governor and Fuel Injection Pump shown on Page 103
j12655e XMBP9509
6N5355 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1767 [1] VALVE  
2. 4N-0605 [1] SPRING  
3. 4N-1591 [1] COVER ASSEM.  
4. 6N-0412 [1] MACHINE SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (1.5mm Thick)  
  8F-1326 [1] WASHER (0.8mm Thick)  
5. 2M-5471 [2] BOLT  
6. 6N-1347 [1] HOUSING ASSEM.  
7. 6N-0343 [1] STUD  
8. 4N-2333 [1] PIN  
9. 4N-1826 [1] DOWEL  
  2D-6392 [1] SEAL  
10. 6N-5325 [6] PIN  
11. 1P-2298 [1] VALVE ASSEM.  
12. 5J-5314 [4] BOLT  
13. 1P-4001 [1] FITTING  
14. 2P-3200 [1] BOLT  
  1J-9671 [1] SEAL  
15. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
16. 1P-2497 [2] BOLT  
17. 4N-0009 [1] COVER  
  4N-0049 [1] GASKET  
18. 1P-9925 [2] BOLT (57mm Long)  
19. 2S-4652 [1] WASHER  
20. 4N-0594 [1] GASKET  
21. 0S-1616 [6] BOLT (25mm Long)  
22. 2A-4781 [1] BOLT (70mm Long)  
  3B-8695 [1] BOLT (89mm Long)  
23. 9S-8632 [1] SPRING  
24. 4N-0116 [1] GUIDE  
25. 4N-6430 [1] PIN  
 

#XMBP95090172
 

6N-5355: GOV & FUEL INJ PUMP GP

GOVERNOR AND FUEL INJECTION PUMP (6N5355 N/S)--Part 2 of 3
Part of Governor and Fuel Injection Pump shown on Page 103
j12656e XMBP9509
6N5355 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0425 [3] WEIGHT  
2. 4N-1723 [1] SHEELD  
3. 4N-2927 [2] RACE  
4. 4N-0511 [3] DOWEL  
5. 4N-0446 [1] CARRIER  
6. 4N-0572 [1] SHAFT ASSEM.  
7. 5M-6509 [1] SEAL  
8. 4N-0406 [1] GEAR (10 Teeth)  
9. 4N-1131 [1] BODY ASSEM.  
10. 8H-9804 [1] SHAFT  
11. 4N-0636 [1] SEAL  
12. 4N-1584 [1] SEAL  
13. 8S-6814 [1] DOWEL  
14. 4N-2954 [1] SLEEVE  
15. 4N-3779 [1] KEY  
16. 4N-0429 [1] GEAR (15 Teeth)  
17. 4N-4313 [1] CAMSHAFT  
18. 4N-0434 [1] RISER  
19. 4N-0527 [1] SPRING  
20. 4N-9019 [1] DOWEL  
21. 4N-2955 [3] BOLT  
22. 4N-2953 [1] RING  
23. 4N-2401 [1] BEARING  
24. 6N-7451 [1] SEAT  
25. 4N-9018 [1] SHAFT  
26. 4N-0927 [1] SHAFT ASSEM.  
27. 6N-2957 [2] WASHER  
28. 6N-2956 [1] WASHER  
29. 6N-4655 [1] DASHPOT ASSEM.  
30. 6N-5324 [1] HOUSING ASSEM.  
  9S-4180 [1] PLUG (Drain)  
  4J-7533 [1] SEAL  
31. 4N-2333 [1] DOWEL  
32. 8S-6814 [2] DOWEL  
33. 4N-5050 [1] PLUG  
34. 4N-0260 [2] SEAL  
35. 6N-2578 [1] BEARING  
36. 4N-2786 [1] SEAL  
 

#XMBP95090173
 

6N-5355: GOV & FUEL INJ PUMP GP

GOVERNOR AND FUEL INJECTION PUMP (6N5355 N/S)--Part 3 of 3
Part of Governor and Fuel Injection Pump shown on Page 103
j12657e XMBP9509
6N5355 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-2658 [6] SCREW  
2. 4N-1763 [6] LEVER  
3. 4N-0209 [6] BONNET  
4. 4N-0218 [6] BUSHING  
5. 9B-1320 [6] VALVE  
  9L-9424 [6] SPRING  
6. 4N-0224 [6] RING  
7. 6N-7527 [6] PLUNGER & BARREL ASSEM  
8. 4N-4318 [6] SPRING  
9. 4N-2728 [6] WASHER  
10. 4N-1750 [6] LIFTER  
  4N-2685 [6] ROLLER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 4N-0508 [1] GASKET  
15. 3H-0442 [1] SEAL  
16. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
17. 4N-0445 [1] LEVER  
18. 4N-1881 [1] LEVER  
19. 4N-0448 [1] LEVER ASSEM.  
20. 8F-5368 [1] WASHER  
21. 4N-0687 [1] COVER ASSEM.  
22. 4N-2786 [1] SEAL  
23. 6N-5482 [2] PLATE  
24. 4N-0402 [1] GASKET  
25. 9S-8601 [1] PIN  
26. 4N-0223 [6] SEAL  
 

#XMBP95090174
 

6N-0509: TORQUE CONTROL GP

TORQUE CONTROL (6N509 N/S)
Part of Governor and Fuel Injection Pump shown on
Page 103
c928242 XMBP9509
6N0509 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [2] INSULATOR  
2. 8M-9064 [1] SHIM  
3. 4L-7124 [1] BOLT  
4. 4N-3882 [1] CONTACT  
5. 4N-3881 [1] SCREW  
6. 9M-1311 [1] NUT  
7. 4N-3884 [1] WASHER  
8. 4N-3883 [1] BAR  
9. 4L-6458 [1] NUT  
 

#XMBP95090175
 

2P-7456: FUEL INJECTION LINES

FUEL INJECTION LINES (2P7456 N/S)
Effective with Serial No. 44V1~44V3802
c117231 XMBP9509
2P7456 FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] LINE ASSEM. (No. 6)  
2. [1] LINE ASSEM. (No. 5)  
3. [1] LINE ASSEM. (No. 4)  
4. [1] CLAMP  
5. [2] DAMPER  
6. [8] BOLT  
  [8] WASHER  
7. [1] LINE ASSEM. (No. 3)  
8. [1] LINE ASSEM. (No. 2)  
9. [1] LINE ASSEM. (No. 1)  
10. [1] CLAMP  
11. [1] FITTING  
12. [1] TUBE (Drain)  
13. [1] CLIP  
14. [1] BOLT  
15. [1] WASHER  
16. [1] SEAL  
17. [1] BOLT  
18. [1] SEAL  
19. [2] BOLT  
20. [1] SEAL  
21. [1] BOLT  
22. [1] PLUG  
23. [1] PLUG  
24. [1] SEAL  
25. [1] CLAMP  
26. [2] DAMPER  
27. [1] CLAMP  
28. [6] VALVE SERVICE GROUP  
29. [1] SEAL  
30. [1] SEAL ASSEM.  
31. [6] BODY  
32. [6] NUT  
33. [1] BRACKET  
34. [1] BOLT  
 

#XMBP95090176
 

6N-0572: FUEL INJECTION LINES

FUEL INJECTION LINES (6N572 N/S)
Effective with Serial No. 44V3803~44V5661
j11183e XMBP9509
6N0572 FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-9891 [6] FUEL VALVE GROUP (Service)  
2. 5B-3718 [1] SEAL  
3. 6F-1069 [1] SEAL ASSEM.  
4. 8S-2389 [6] BODY  
5. 5H-7225 [6] NUT  
6. 6N-1966 [1] LINE ASSEM. (No. 6)  
7. 6N-1965 [1] LINE ASSEM. (No. 5)  
8. 4N-8814 [1] LINE ASSEM. (No. 4)  
9. 4N-3283 [1] LINE ASSEM. (No. 3)  
10. 4N-3282 [1] LINE ASSEM. (No. 2)  
11. 4N-3281 [1] LINE ASSEM. (No. 1)  
12. 1B-7182 [6] BOLT  
  3B-4505 [6] LOCKWASHER  
13. 6N-0535 [1] CLAMP  
  6N-0536 [1] CLAMP (Threaded)  
14. 6N-0537 [2] DAMPER  
15. 5M-6214 [2] PLUG  
16. 2H-3934 [1] SEAL  
17. 0T-0102 [1] BOLT  
18. 5M-2894 [4] WASHER  
19. 8M-2772 [2] CLIP  
20. 5P-0756 H TUBE 4.1dm  
21. 5P-0756 H TUBE 5.6dm  
22. 1B-4203 [3] NUT  
23. 1A-5350 [1] CLIP  
24. 2P-5644 [1] BRACKET  
25. 2B-2695 [2] BOLT  
  9M-1974 [2] WASHER  
26. 0S-1619 [2] BOLT  
27. 4D-9786 [1] BLOCK  
28. 2P-5641 [1] ADAPTER  
29. 1A-2029 [1] BOLT  
30. 8M-5253 [1] SEAL  
31. 8M-5248 [1] SEAL  
32. 2A-5546 [2] BOLT  
  5P-0537 [2] WASHER  
33. 8S-3999 [1] CLAMP  
  8S-3998 [1] CLAMP (Theraded)  
  8S-4000 [2] DAMPER  
  H   ORDER BY THE DM
 

#XMBP95090177
 

4N-8054: LINES GP-FUEL INJECTION

FUEL INJECTION LINES (4N8054 N/S)
Effective with Serial No. 44V5662~44V11608, 44V11611~44V11911 (For Japan)
44V5662~44V12302 (For Outside Japan)
j10988e XMBP9509
4N8054 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-9891 [6] VALVE GROUP (Service)  
2. 5B-3718 [1] SEAL  
3. 6F-1069 [1] SEAL ASSEM.  
4. 8S-2389 [6] BODY  
5. 5H-7225 [6] NUT  
6. 6N-1966 [1] LINE ASSEM. (No. 6)  
7. 6N-1965 [1] LINE ASSEM. (No. 5)  
8. 4N-8814 [1] LINE ASSEM. (No. 4)  
9. 4N-3283 [1] LINE ASSEM. (No. 3)  
10. 4N-3282 [1] LINE ASSEM. (No. 2)  
11. 4N-3281 [1] LINE ASSEM. (No. 1)  
12. 1B-7182 [6] BOLT  
  3B-4505 [6] LOCKWASHER  
13. 6N-0535 [1] CLAMP  
  6N-0536 [1] CLAMP (Threaded)  
14. 6N-0537 [2] DAMPER  
15. 5M-6214 [2] PLUG  
16. 2H-3934 [1] SEAL  
17. 4F-4879 [1] BOLT  
18. 5M-2894 [4] WASHER  
19. 8M-2772 [2] CLIP  
20. 5P-0756 H TUBE 4.1dm  
21. 5P-0756 H TUBE 6.0dm  
22. 1B-4203 [3] NUT  
23. 1A-5350 [1] CLIP  
24. 2P-5644 [1] BRACKET  
25. 2B-2695 [2] BOLT  
  9M-1974 [2] WASHER  
26. 0S-1619 [2] BOLT  
27. 4D-9786 [1] BLOCK  
28. 2P-5641 [1] ADAPTER  
29. 1A-2029 [1] BOLT  
30. 8M-5253 [1] SEAL  
31. 8M-5248 [1] SEAL  
32. 2A-5546 [2] BOLT  
  5P-0537 [2] WASHER  
33. 8S-3998 [1] CLAMP (Threaded)  
  8S-3999 [1] CLAMP  
  8S-4000 [2] DAMPER  
  H   ORDER BY THE DM
 

#XMBP95090178
 

FUEL INJECTION LINES

FUEL INJECTION LINES
Effective with Serial No. 44V11609, 44V11610, 44V11912~44V12302
For Japan
j13705e XMBP9509
None FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-5696 [1] LINE ASSEM. (NO. 6)  
2. 2P-8890 [1] LINE ASSEM. (NO. 5)  
3. 8L-5694 [1] LINE ASSEM. (NO. 4)  
4. 8S-4003 [1] CLAMP  
5. 8S-4005 [2] DAMPER  
6. 1B-7182 [8] BOLT  
  3B-4505 [8] LOCKWASHER  
7. 8L-5693 [1] LINE ASSEM. (NO. 3)  
8. 8L-5692 [1] LINE ASSEM. (NO. 2)  
9. 8L-5691 [1] LINE ASSEM. (NO. 1)  
10. 8S-4004 [1] CLAMP  
16. 2H-3932 [1] SEAL  
17. 2P-3201 [1] BOLT  
18. 8F-3469 [1] SEAL  
19. 2P-3202 [2] BOLT  
20. 4F-7391 [1] SEAL  
21. 2P-3210 [1] BOLT  
22. 7H-3171 [1] PLUG  
23. 3L-1850 [1] PLUG  
24. 7F-8607 [1] SEAL  
25. 8S-3998 [1] CLAMP  
26. 8S-4000 [2] DAMPER  
27. 8S-3999 [1] CLAMP  
28. 7S-9891 [6] VALVE SERVICE GROUP  
29. 5B-3718 [1] SEAL  
30. 6F-1069 [1] SEAL ASSEM.  
31. 8S-2389 [6] BODY  
32. 5H-7225 [6] NUT  
33. 3N-3696 [1] BRACKET  
34. 2P-7557 [1] BOLT  
 

#XMBP95090179
 

FUEL INJECTION LINES

FUEL INJECTION LINES
Effective with Serial No. 44V3803~44V11608, 44V11611~44V11911
Part of Field Conversion Arrangement listed on Page 100B
For Japan
AN ATTACHMENT
j13705e XMBP9509
None FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-5696 [1] LINE ASSEM. (NO. 6)  
2. 2P-8890 [1] LINE ASSEM. (NO. 5)  
3. 8L-5694 [1] LINE ASSEM. (NO. 4)  
4. 8S-4003 [1] CLAMP  
5. 8S-4005 [2] DAMPER  
6. 1B-7182 [8] BOLT  
  3B-4505 [8] LOCKWASHER  
7. 8L-5693 [1] LINE ASSEM. (NO. 3)  
8. 8L-5692 [1] LINE ASSEM. (NO. 2)  
9. 8L-5691 [1] LINE ASSEM. (NO. 1)  
10. 8S-4004 [1] CLAMP  
16. 2H-3932 [1] SEAL  
17. 2P-3201 [1] BOLT  
18. 8F-3469 [1] SEAL  
19. 2P-3202 [2] BOLT  
20. 4F-7391 [1] SEAL  
21. 2P-3210 [1] BOLT  
22. 7H-3171 [1] PLUG  
23. 3L-1850 [1] PLUG  
24. 7F-8607 [1] SEAL  
25. 8S-3998 [1] CLAMP  
26. 8S-4000 [2] DAMPER  
27. 8S-3999 [1] CLAMP  
28. 7S-9891 [6] VALVE SERVICE GROUP  
29. 5B-3718 [1] SEAL  
30. 6F-1069 [1] SEAL ASSEM.  
31. 8S-2389 [6] BODY  
32. 5H-7225 [6] NUT  
33. 3N-3696 [1] BRACKET  
34. 2P-7557 [1] BOLT  
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
D6C TRACTOR ENGINE
Governor
D6C TRACTOR ENGINE
Fuel Injection Pump Housing And Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Fuel Transfer Pump
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog D6C :

6N-5227 GOV & FUEL INJ PUMP GP
TORQUE CONTROL
TORQUE CONTROL
TORQUE CONTROL
TORQUE CONTROL
CONTROL GP-TORQUE
6N-3609 CONTROL GP-TORQUE
TORQUE CONTROL
8L-8682 TORQUE CONTROL
FUEL PUMP HOUSING GROUP
5S-9076 FUEL PUMP HOUSING GROUP
7S-9333 GOVERNOR GROUP
GOVERNOR GROUP
7S-9333 GOVERNOR GROUP
GOV & FUEL INJ PUMP GP
6N-5355 GOV & FUEL INJ PUMP GP
6N-5355 GOV & FUEL INJ PUMP GP
6N-5355 GOV & FUEL INJ PUMP GP
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
FUEL INJECTION LINES
2P-7456 FUEL INJECTION LINES
FUEL INJECTION LINES
6N-0572 FUEL INJECTION LINES
LINES GP-FUEL INJECTION
4N-8054 LINES GP-FUEL INJECTION
FUEL INJECTION LINES
FUEL INJECTION LINES

Truck sale:

Caterpillar D6C
 
Caterpillar D6C
- Crawler dozers
QUINN COMPANY
 
22.000 
Caterpillar D6C, Bulldozer, Bau-Und Bergbauausrüstung


 
25.522 
Caterpillar D6C, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D6C, Crawler dozers, Construction
19,500 
Caterpillar D6C, Crawler dozers, Construction
- Crawler dozers
PETERSON CAT
Caterpillar D6C, Construction
13,900 USD 
Caterpillar D6C, Construction
- Crawler dozers
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.