GOVERNOR AND FUEL INJECTION PUMP (6N5356 N/S)--Part 3 of 3 Part of Governor and Fuel Injection Pump shown on Page 113 941



FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP
LINES GP-FUEL INJECTION

TRACK LOADER 941 TRACK LOADER 16U
 941B TRACK TYPE TRACTOR / POWERSHIFT / 16U00226-UP (MACHINE) POWERED BY 3304 ENGINE XMBP9543 941 16U   (1971)

FUEL SYSTEM

GOVERNOR GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
 

#XMBP95430160
 

6N-5356: GOV & FUEL INJ PUMP GP

GOVERNOR AND FUEL INJECTION PUMP (6N5356 N/S)--Part 3 of 3
Part of Governor and Fuel Injection Pump shown on Page 113
j13227e XMBP9543
6N5356 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 2N-2658 [4] SCREW  
2. 4N-1763 [4] LEVER  
3. 4N-0209 [4] BONNET  
4. 4N-0218 [4] BUSHING  
5. 4N-2655 [4] VALVE  
  9L-9424 [4] SPRING  
6. 4N-0224 [4] RING  
7. 4N-1765 [4] PLUNGER & BARREL ASSEM.  
8. 4N-4318 [4] SPRING  
9. 4N-2728 [4] WASHER  
10. 4N-1750 [4] LIFTER  
  4N-2685 [4] ROLLER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 4N-0508 [1] GASKET  
15. 3H-0442 [1] SEAL  
16. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
17. 4N-0445 [1] LEVER  
18. 4N-1881 [1] LEVER  
19. 4N-0448 [1] LEVER ASSEM.  
20. 8F-5368 [1] WASHER  
21. 4N-0687 [1] COVER ASSEM.  
22. 4N-2786 [1] SEAL  
23. 6N-5482 [2] PLATE  
24. 4N-0402 [1] GASKET  
25. 9S-8601 [1] PIN  
26. 4N-0223 [4] SEAL  
 

#XMBP95430161
 

9S-3312: TORQUE CONTROL

TORQUE CONTROL (9S3312 N/S)
Effective with Serial No. 43V1~43V3105
j5861e XMBP9543
9S3312 TORQUE CONTROL Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 3Y-0405 [2] BOLT  
2. 9M-6292 [1] LOCK  
3. 8M-9062 [1] RETAINER  
4. 1P-6452 [1] INSULATOR  
5. 8S-4317 [1] CONTACT  
6. 1P-6453 [1] BAR  
7. 1P-9958 [1] INSULATOR  
 

#XMBP95430162
 

6N-0581: TORQUE CONTROL GP

TORQUE CONTROL (6N581 N/S)
Effective with Serial No. 43V3106~43V9482, 43V9484~43V9688
Part of Governor and Fuel Injection Pump shown on
Page 98
j11142e XMBP9543
6N0581 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 4L-6458 [1] NUT  
2. 4L-7124 [1] BOLT  
3. 8M-9064 [1] SHIM (1.651mm Thick)  
4. 1P-6452 [2] INSULATOR  
5. 4N-3882 [1] CONTACT  
6. 9L-7235 [3] SHIM (0.991mm Thick)  
7. 4N-7777 [3] SPACER (0.254mm Thick)  
8. 4N-9098 [1] SPACER (5.08mm Thick)  
9. 1P-6453 [1] BAR  
10. 9L-5176 [1] SPRING (0.610mm Thick)  
11. 9L-9347 [1] SHIM (0.508mm Thick)  
12. 8L-8601 [6] SPACER (0.05mm Thick)  
 

#XMBP95430163
 

2S-9519: STOP GP-RACK

TORQUE CONTROL (2S9519 N/S)
Effective with Serial No. 43V9483, 43V9689~43V15223
j14140e XMBP9543
2S9519 STOP GP-RACK Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 1P-9958 [1] INSULATOR  
2. 9L-7235 [1] SHIM (1.016mm Thick)  
3. 3S-0602 [1] RETAINER  
4. 8S-4317 [1] CONTACT (0.45mm Thick)  
5. 9M-6292 [1] LOCK  
6. 3Y-0405 [2] BOLT  
7. 8M-9062 [1] RETAINER  
8. 1P-6452 [1] INSULATOR  
9. 2S-7391 [1] BAR  
 

#XMBP95430164
 

TORQUE CONTROL

TORQUE CONTROL
Effective with Serial No. 43V3106~43V9482, 43V9484~43V9688
Part of Field Conversion Arrangement listed on Page
125
For Japan
AN ATTACHMENT
j5861e XMBP9543
None TORQUE CONTROL Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 3Y-0405 [2] BOLT  
2. 9M-6292 [1] LOCK  
3. 8M-9062 [1] RETAINER  
4. 1P-6452 [1] INSULATOR  
5. 8S-4317 [1] CONTACT  
6. 1P-6453 [1] BAR  
7. 1P-9958 [1] INSULATOR  
 

#XMBP95430165
 

6N-0509: TORQUE CONTROL GP

TORQUE CONTROL (6N509 N/S)
Part of Governor and Fuel Injection Pump shown on
Page 113
c931647 XMBP9543
6N0509 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 1P-6452 [2] INSULATOR  
2. 8M-9064 [1] SHIM  
3. 4L-7124 [1] BOLT  
4. 4N-3882 [1] CONTACT  
5. 4N-3881 [1] SCREW  
6. 9M-1311 [1] NUT  
7. 4N-3884 [1] WASHER  
8. 4N-3883 [1] BAR  
9. 4L-6458 [1] NUT  
 

#XMBP95430166
 

2P-7461: FUEL INJECTION LINES

FUEL INJECTION LINES (2P7461 N/S)
Effective with Serial No. 43V1~43V3105
j9167e XMBP9543
2P7461 FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 8L-5664 [1] LINE ASSEM. (No. 4)  
2. 8L-5663 [1] LINE ASSEM. (No. 3)  
3. 8L-5662 [1] LINE ASSEM. (No. 2)  
4. 8L-5661 [1] LINE ASSEM. (No. 1)  
5. 8M-1584 [4] VALVE SERVICE GROUP  
6. 6F-1069 [1] SEAL ASSEM.  
7. 5B-3718 [1] SEAL  
8. 8S-2389 [4] BODY  
9. 5H-7225 [4] NUT  
10. 1P-9328 [1] FITTING  
11. 2P-1287 [1] BOLT  
  9S-1350 [1] CLIP  
12. 5S-7223 [1] TUBE  
13. 2P-3201 [1] BOLT (25.4mm Long)  
14. 8F-3469 [1] SEAL  
15. 2H-3932 [2] SEAL  
16. 2P-3202 [1] BOLT (28.6mm Long)  
17. 3N-3694 [1] BRACKET  
18. 7F-8607 [1] SEAL  
19. 0S-1573 [1] BOLT (102mm Long)  
20. 2P-3204 [1] BOLT (38.1mm Long)  
21. 3J-5389 [1] PLUG  
22. 3B-7730 [1] ELBOW  
 

#XMBP95430167
 

4N-3374: FUEL INJECTION LINES

FUEL INJECTION LINES (4N3374 N/S)
Effective with Serial No. 43V3106~43V3373
j10359e XMBP9543
4N3374 FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 4N-3284 [1] LINE ASSEM. (No. 4)  
2. 4N-3283 [1] LINE ASSEM. (No. 3)  
3. 4N-3282 [1] LINE ASSEM. (No. 2)  
4. 4N-3281 [1] LINE ASSEM. (No. 1)  
5. 1B-2790 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
6. 8S-3996 [2] CLAMP  
7. 8S-4216 [4] DAMPER  
8. 8S-3997 [2] CLAMP  
9. 1B-4203 [3] NUT  
10. 5M-6214 [2] PLUG  
11. 5P-0756 H TUBE 6dm  
12. 1A-5350 [1] CLIP  
13. 2H-3934 [1] SEAL  
14. 5P-0756 H TUBE 4.5dm  
15. 8M-2772 [2] CLIP  
16. 0T-0102 [1] BOLT  
17. 5M-2894 [2] WASHER  
18. 8M-5248 [1] SEAL  
19. 0S-1619 [1] BOLT  
20. 2P-3850 [1] ADAPTER  
21. 8M-5253 [1] SEAL  
22. 3J-5390 [1] PLUG  
23. 7B-3235 [1] BOLT  
  2M-0849 [1] WASHER  
24. 3J-1907 [2] SEAL  
25. 2R-6806 [1] CONNECTOR  
26. 6F-8868 [2] CLAMP  
27. 0S-1615 [1] BOLT  
  1B-4330 [1] NUT  
  3B-4504 [1] LOCKWASHER  
28. 4N-3551 [1] TUBE ASSEM.  
29. 030-7942 [1] ELBOW  
30. 8M-1584 [4] FUEL VALVE SERVICE GROUP  
31. 5B-3718 [1] SEAL  
32. 6F-1069 [1] SEAL ASSEM.  
33. 8S-2389 [4] BODY  
34. 5H-7225 [4] NUT  
  H   ORDER BY THE DM
 

#XMBP95430168
 

4N-3374: FUEL INJECTION LINES

FUEL INJECTION LINES (4N3374 N/S)
Effective with Serial No. 43V3374~43V9482, 43V9484~43V9688
j11214e XMBP9543
4N3374 FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 4N-3284 [1] LINE ASSEM. (No. 4)  
2. 4N-3283 [1] LINE ASSEM. (No. 3)  
3. 4N-3282 [1] LINE ASSEM. (No. 2)  
4. 4N-3281 [1] LINE ASSEM. (No. 1)  
5. 1B-2790 [4] BOLT  
  3B-4505 [4] LOCKWASHER  
6. 8S-3996 [2] CLAMP  
7. 8S-4216 [4] DAMPER  
8. 8S-3997 [2] CLAMP  
9. 1B-4203 [3] NUT  
10. 5M-6214 [2] PLUG  
11. 5P-0756 H TUBE 5.6dm  
12. 1A-5350 [1] CLIP  
13. 2H-3934 [1] SEAL  
14. 5P-0756 H TUBE 4.1dm  
15. 8M-2772 [2] CLIP  
16. 0T-0102 [1] BOLT  
17. 5M-2894 [2] WASHER  
18. 8M-5248 [1] SEAL  
19. 0L-1352 [1] BOLT  
20. 2P-3850 [1] ADAPTER  
21. 8M-5253 [1] SEAL  
22. 3J-5390 [1] PLUG  
23. 7B-3235 [1] BOLT  
  2M-0849 [1] WASHER  
24. 3J-1907 [2] SEAL  
25. 2R-6806 [1] CONNECTOR  
26. 6F-8868 [2] CLAMP  
27. 0S-1615 [1] BOLT  
  1B-4330 [1] NUT  
  3B-4504 [1] LOCKWASHER  
28. 4N-3551 [1] TUBE ASSEM.  
29. 030-7942 [1] ELBOW  
30. 8M-1584 [4] FUEL VALVE GROUP (Service)  
31. 5B-3718 [1] SEAL  
32. 6F-1069 [1] SEAL ASSEM.  
33. 8S-2389 [4] BODY  
34. 5H-7225 [4] NUT  
35. 2A-5546 [2] BOLT  
  5P-0537 [2] WASHER  
36. 6N-3760 [1] BRACKET  
  H   ORDER BY THE DM
 

#XMBP95430169
 

7N-4549: FUEL INJECTION LINES

FUEL INJECTION LINES (7N4549 N/S)
Effective with Serial No. 43V9483, 43V9689~43V15223
j14458e XMBP9543
7N4549 FUEL INJECTION LINES Parts scheme
  For full view, you need register

Parts for your 941 TRACK LOADER:

Pos. Part No Qty Parts name Comments
1. 8L-5664 [1] LINE ASSEM. (No. 4)  
2. 8L-5663 [1] LINE ASSEM. (No. 3)  
3. 7N-3872 [1] LINE ASSEM. (No. 2)  
4. 8L-5661 [1] LINE ASSEM. (No. 1)  
5. 8M-1584 [4] VALVE SERVICE GROUP  
6. 6F-1069 [1] SEAL ASSEM.  
7. 5B-3718 [1] SEAL  
8. 8S-2389 [4] BODY  
9. 5H-7225 [4] NUT  
10. 5M-2894 [2] WASHER  
11. 9S-1350 [1] CLIP  
12. 5P-6007 H TUBE 0.45m  
13. 0S-1594 [1] BOLT (25.5mm Long)  
14. 8F-3469 [1] SEAL  
15. 2H-3932 [2] SEAL  
16. 0S-1588 [1] BOLT (31.5mm Long)  
17. 3N-3694 [1] BRACKET  
18. 7F-8607 [1] SEAL  
19. 0S-1573 [1] BOLT (102mm Long)  
20. 0S-1591 [1] BOLT (38mm Long)  
21. 1P-9328 [1] FITTING  
22. 3J-5389 [1] PLUG  
  H   ORDER BY THE M
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Governor
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Fuel Transfer Pump
SLEEVE METERING FUEL SYSTEM FOR FOUR AND SIX CYLINDER 4.75"
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 941 :

6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-5356 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-6115 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP
6N-2477 GOVERNOR AND FUEL INJECTION PUMP
4N-6116 GOV & FUEL INJ PUMP GP
6N-2476 GOVERNOR AND FUEL INJECTION PUMP GROUP
7S-9333 GOVERNOR GROUP
GOVERNOR GROUP
7S-9333 GOVERNOR GROUP
TORQUE CONTROL
9S-3312 TORQUE CONTROL
TORQUE CONTROL GP
6N-0581 TORQUE CONTROL GP
STOP GP-RACK
2S-9519 STOP GP-RACK
TORQUE CONTROL
TORQUE CONTROL
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
FUEL INJECTION LINES
2P-7461 FUEL INJECTION LINES
FUEL INJECTION LINES
4N-3374 FUEL INJECTION LINES
FUEL INJECTION LINES
4N-3374 FUEL INJECTION LINES

Truck sale:

Caterpillar 941, Construction
3,000 
Caterpillar 941, Construction
- track loaders
MICHIGAN CAT
7038 - CAT 941
 
7038 - CAT 941

avspare
1974 CAT 941
USD $13,750 
1974 CAT 941

WESTERN MICHIGAN EQUIPMENT
Traverse City, Michigan
1980 CAT 941
Call 
1980 CAT 941

DDG Equipment
1974 CAT 941
USD $5,500 
1974 CAT 941

RP Equipment
Allentown, Pennsylvania