AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3P5595 RIPPER LINES GROUP - Part 2 of 2 Part of Hydraulic Control Arrangement listed on Page 174 and 175 D7G


HYDRAULIC SYSTEM
LINES GP-RIPPER
LINES GP-CYLINDER
IMPLEMENTS
LINKAGE GP
BULLDOZER GP

TRACK-TYPE TRACTOR D7G TRACK-TYPE TRACTOR 64V
 D7G TRACK-TYPE TRACTOR / DIRECT DRIVE / 64V00995-UP (MACHINE) POWERED BY 3306 ENGINE XMBP9674 D7G 64V   (1980)

HYDRAULIC SYSTEM

LINES GP-RIPPER
LINES GP-RIPPER
3P-5595 LINES GP-RIPPER
3P-5595 LINES GP-RIPPER
LINES GP-RIPPER
9J-1010 LINES GP-RIPPER
 

#XMBP96740240
 

3P-5595: LINES GP-RIPPER

3P5595 RIPPER LINES GROUP - Part 2 of 2
Part of Hydraulic Control Arrangement listed on Page 174 and 175
j16182e XMBP9674
3P5595 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-6705 [1] HOSE ASSEM.  
  5P-0178 H HOSE 43cm  
2. 8S-6417 [1] COUPLING ASSEM. (Straight)  
3. 4S-5414 [2] SLEEVE  
4. 8S-6393 [1] COUPLING ASSEM. (90 degrees)  
5. 030-3978 [1] CONNECTOR  
  3J-7354 [1] SEAL  
6. 0S-1595 [1] BOLT (31.5mm Long)  
7. 1A-2029 [1] BOLT (28.5mm Long)  
8. 3B-4506 [2] LOCKWASHER  
  4B-4278 [2] WASHER  
9. 3P-6022 [1] HOSE ASSEM.  
  5P-0181 HC HOSE 172cm  
10. 3S-7252 [2] SLEEVE  
11. 2P-1801 [1] STEM ASSEM. (Straight)  
12. 2P-4813 [1] STEM ASSEM. (90 degrees)  
13. 4J-0520 [1] SEAL  
14. 7S-8920 [3] CLIP  
  7S-8921 [3] CLIP  
15. 3P-6095 [2] BRACKET ASSEM.  
16. 9F-2978 [1] NUT (Weld)  
17. 0S-1594 [1] BOLT (25.5mm Long)  
18. 1A-5822 [1] BOLT (70mm Long)  
19. 4F-8965 [4] BOLT  
  4S-9191 C [4] WASHER  
20. 9P-2751 C [1] BRACKET ASSEM.  
  1F-5339 [1] LUG  
21. 7M-7260 C GASKET SOLUTION  
22. 0S-1589 C [2] BOLT  
23. 9P-4775 C [1] GUARD ASSEM.  
24. 0S-1592 [2] BOLT  
25. 4J-0522 [1] SEAL  
26. 3Y-6580 C [1] DOOR  
27. 3B-4508 [3] LOCKWASHER  
28. 7B-3235 [1] BOLT  
29. 1D-4719 [2] NUT  
  4B-4280 [4] WASHER  
30. 0S-1587 [1] BOLT  
31. 6P-7478 [1] BRACKET  
32. 4D-3704 C [4] WASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE CM
 

#XMBP96740241
 

3P-5596: LINES GP-TILT CYLINDER

3P5596 TILT CYLINDER LINES GROUP
Part of Hydraulic Control Arrangement listed on Page 175
j16823e XMBP9674
3P5596 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
2. 4B-4278 C [2] WASHER  
3. 9S-0905 [1] GUARD ASSEM.  
4. 8S-4951 [2] CAP  
5. 0S-1595 [5] BOLT  
6. 3B-4508 [7] LOCKWASHER  
7. 4B-4280 [5] WASHER  
8. 0S-1585 [2] BOLT  
9. 1P-1050 [1] BRACKET ASSEM.  
  1F-0748 [3] NUT (Weld)  
10. 1P-1048 [1] CLAMP  
11. 1P-5883 [1] MANIFOLD ASSEM.  
12. 3J-5169 [2] NUT  
13. 0S-1589 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
  4B-4281 [2] WASHER  
14. 8M-0505 [4] CONNECTOR  
  3K-0360 [4] SEAL  
15. 6P-5327 [1] CLIP  
16. 1D-4717 [2] NUT  
17. 3P-4824 [1] BRACKET  
18. 3P-4822 [1] HOSE ASSEM.  
  5P-0179 H HOSE 102cm  
19. 9S-9727 [1] COUPLING ASSEM. (45 degrees)  
20. 3S-8606 [2] SLEEVE  
21. 8S-6391 [1] COUPLING ASSEM.  
22. 030-8189 [2] CONNECTOR  
  3D-2824 [2] SEAL  
23. 3P-4821 [1] HOSE ASSEM.  
  5P-0179 H HOSE 114cm  
24. 9S-9727 [1] COUPLING ASSEM. (45 degrees)  
25. 3S-8606 [2] SLEEVE  
26. 1P-8408 [1] COUPLING ASSEM. (90 degrees)  
27. 6P-6655 [1] HOSE ASSEM.  
  5P-0178 H HOSE 33cm  
28. 4S-5414 [2] SLEEVE  
29. 5P-3857 [2] COUPLING ASSEM.  
30. 2R-6806 [4] CONNECTOR  
  3J-1907 [4] SEAL  
31. 6P-6656 [1] HOSE ASSEM.  
  5P-0178 H HOSE 33cm  
32. 4S-5414 [2] SLEEVE  
33. 5P-3857 [2] COUPLING ASSEM.  
34. 1D-4719 [1] NUT  
35. 5M-2894 C [4] WASHER  
36. 3Y-3361 JC [1] GUARD ASSEM. (Crankcase)  
  H   ORDER BY THE CM
  J   NOT SHOWN (MOUNTED ON BEVEL GE
  C   INDICATES CHANGE
 

#XMBP96740242
 

3P-3279: LINK GP-IMPLEMNET

3P3279 IMPLEMENT LINKAGE GROUP - Bulldozer
Part of Hydraulic Control Arrangement listed on Page 174
j11650e XMBP9674
3P3279 LINK GP-IMPLEMNET Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-0509 [4] BOLT  
2. 3B-4506 [8] LOCKWASHER  
3. 6P-5386 [1] COVER  
4. 3P-4219 [1] COVER  
5. 6P-5209 [1] COVER  
6. 6P-5208 [1] GUIDE  
7. 6P-5207 [1] SEAL  
8. 2A-1736 [1] HANDLE  
9. 3P-3941 [1] LEVER  
10. 2J-7295 [1] SPRING  
11. 4B-1291 [4] SCREW  
12. 4M-0496 [2] BOLT  
  4M-0497 [2] NUT  
13. 2K-4973 [2] LOCKNUT  
14. 3P-3942 [1] SHAFT  
  1B-8704 [2] KEY  
15. 1A-2029 [4] BOLT  
  4B-4278 [4] WASHER  
16. 0S-1591 [2] BOLT  
  1D-4717 [2] NUT  
17. 3P-3938 [1] LEVER  
18. 6P-5205 [1] BRACKET ASSEM.  
    (Includes)
19. 9F-5647 [2] BEARING  
20. 5B-9079 [2] NUT  
21. 4L-7551 [1] ROD  
22. 4D-4064 [2] END  
  5P-0530 H [1] FILM (For Outside Japan)  
  3Y-3229 [1] FILM (For Japan)  
  H   NOT SHOWN
 

#XMBP96740243
 

3P-3277: LINKAGE GP-IMPLEMENT

3P3277 IMPLEMENT LINKAGE GROUP - Ripper
Part of Hydraulic Control Arrangement listed on Page
174 and 175
j15717e XMBP9674
3P3277 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [1] HANDLE  
2. 6P-5207 [1] SEAL (Domed)  
3. 3P-3937 [1] SHAFT  
  7L-0811 [1] DOWEL  
4. 8P-0753 [1] BRACKET ASSEM.  
5. 1A-2029 [2] BOLT  
  5J-4715 [2] WASHER  
6. 3P-3945 [1] ROD  
7. 9S-1303 [1] PIN  
  3B-4607 [1] COTTER PIN  
8. 5B-9079 [1] NUT  
9. 5J-5315 [1] END  
  2L-6267 [1] NUT  
10. 2J-7295 [1] SPRING  
11. 3P-3943 [1] LEVER ASSEM.  
12. 9F-5647 [2] BEARING  
13. 9P-3697 C [1] BOOT  
14. 9P-7361 C [1] FLANGE  
  5P-0532 H [1] FILM (For Outside Japan)  
  3Y-3230 [1] FILM (For Japan)  
  C   INDICATES CHANGE
  H   NOT SHOWN
 

#XMBP96740244
 

3P-3278: LINKAGE GP-IMPLEMENT

3P3278 IMPLEMENT LINKAGE GROUP--Bulldozer and Tilt Cylinder
Part of Hydraulic Control Arrangement listed on Page 175
j15716e XMBP9674
3P3278 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-0509 [4] BOLT  
2. 3B-4506 [8] LOCKWASHER  
3. 3P-4219 [1] COVER  
4. 6P-5386 [1] COVER  
5. 6P-5209 [1] COVER  
6. 6P-5208 [1] GUIDE  
7. 6P-5207 [1] SEAL  
8. 2A-1736 [1] HANDLE  
9. 3P-3931 [1] LEVER ASSEM.  
10. 9F-5647 [2] BEARING  
11. 2J-7295 [1] SPRING  
12. 3P-3938 [1] LEVER  
13. 4B-1291 [4] SCREW  
14. 3P-3937 [1] SHAFT  
  7L-0811 [1] DOWEL  
15. 1A-2029 [4] BOLT  
  4B-4278 [4] WASHER  
16. 0S-1591 [1] BOLT  
  1D-4717 [1] NUT  
17. 5J-5315 [1] END  
18. 5B-9079 [3] NUT  
19. 3P-3945 [1] ROD  
20. 9S-1303 [1] PIN  
  3B-4607 [1] COTTER PIN  
21. 3P-3935 [1] SHAFT ASSEM.  
  1B-8704 [1] KEY  
22. 6P-5205 [1] BRACKET ASSEM.  
23. 9F-5647 [2] BEARING  
24. 2L-6267 [1] NUT  
25. 4L-7551 [1] ROD  
26. 4M-0496 [2] BOLT  
  4M-0497 [2] NUT  
27. 2K-4973 [2] LOCKNUT  
28. 4D-4064 [2] END  
29. 9P-3697 C [1] BOOT  
30. 9P-7361 C [1] FLANGE  
31. 5P-0531 H [1] FILM (For Outside Japan)  
  3Y-3266 H [1] FILM (For Japan)  
  C   INDICATES CHANGE
  H   NOT SHOWN
 

#XMBP96740245
 

6P-5747: LINKAGE GP-IMPLEMENT

6P5747 IMPLEMENT LINKAGE GROUP--Bulldozer
Part of Hydraulic Control Arrangement listed on Page 176
For use with Modular Cab
AN ATTACHMENT
j14414e XMBP9674
6P5747 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-8768 [1] COVER ASSEM.  
2. [1] SEAL  
3. 4B-1291 [4] SCREW  
4. 6P-5207 [1] SEAL  
5. 6P-9632 [1] LEVER ASSEM.  
6. 2A-1736 [1] HANDLE  
7. 1A-2029 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
8. 5H-2532 [1] KEY  
9. 6P-7071 [1] LEVER  
10. 2J-7295 [1] SPRING  
11. 6P-5208 [1] GUIDE  
12. 1B-8704 [2] KEY  
13. 6P-7076 [1] LEVER  
14. 3P-3942 [1] SHAFT  
15. 0S-1591 [2] BOLT  
  1D-4717 [2] NUT  
16. 4B-4278 [4] WASHER  
17. 6P-5205 [1] BRACKET ASSEM.  
  9F-5647 [2] BEARING  
18. 6P-7075 [1] LEVER  
19. 4M-0496 [2] BOLT  
  4M-0497 [2] NUT  
  2K-4973 [2] LOCKNUT  
20. 4D-4064 [2] END  
21. 5B-9079 [2] NUT  
22. 2R-1937 [1] STUD  
23. 5P-0530 H [1] FILM  
  H   NOT SHOWN
 

#XMBP96740246
 

6P-5748: LINKAGE GP-IMPLEMENT

6P5748 IMPLEMENT LINKAGE GROUP--Bulldozer and Tilt Cylinder
Part of Hydraulic Control Arrangement listed on Page 176
For use with Modular Cab
AN ATTACHMENT
j15715e XMBP9674
6P5748 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-7075 [1] LEVER  
2. 4M-0496 [2] BOLT  
  4M-0497 [2] NUT  
3. 2K-4973 [3] LOCKNUT  
4. 4D-4064 [2] END  
5. 5B-9079 [3] NUT  
6. 2R-1937 [1] STUD  
7. 6P-8768 [1] COVER ASSEM.  
8. [1] SEAL  
9. 4B-1291 [4] SCREW  
10. 1A-2029 [5] BOLT  
  3B-4506 [5] LOCKWASHER  
11. 6P-9632 [1] LEVER ASSEM.  
12. 5H-2532 [1] KEY  
13. 2A-1736 [1] HANDLE  
14. 6P-5207 [1] SEAL  
15. 2J-7295 [1] SPRING  
16. 6P-5208 [1] GUIDE  
17. 6P-7069 [1] LEVER ASSEM.  
  9F-5647 [2] BEARING  
18. 3P-3937 [1] SHAFT  
  7L-0811 [1] DOWEL  
19. 0S-1591 [1] BOLT  
  1D-4717 [1] NUT  
20. 6P-5205 [1] BRACKET ASSEM.  
  9F-5647 [2] BEARING  
21. 6P-7076 [1] LEVER  
22. 6P-7074 [1] ROD  
23. 9S-1303 [1] PIN  
  3B-4607 [1] COTTER PIN  
24. 5J-5315 [1] END  
25. 3P-3935 [1] SHAFT ASSEM.  
26. 4B-4278 [4] WASHER  
27. 1B-8704 [1] KEY  
28. 5P-0531 H [1] FILM  
29. 9P-7361 C [1] FLANGE  
30. 9P-3697 C [1] BOOT  
  C   INDICATES CHANGE
  H   NOT SHOWN
 

#XMBP96740247
 

6P-5749: LINKAGE GP-IMPLEMENT

6P5749 IMPLEMENT LINKAGE GROUP--Ripper
Part of Hydraulic Control Arrangement listed on Page 176
For use with Modular Cab
AN ATTACHMENT
j15714e XMBP9674
6P5749 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-7067 [1] LEVER ASSEM.  
  9F-5647 [2] BEARING  
2. 5J-5315 [1] END  
  2L-6267 [1] NUT  
3. 1A-2029 [3] BOLT  
4. 3B-4506 [5] LOCKWASHER  
5. 6P-9633 [1] LEVER ASSEM.  
  5H-2532 [1] KEY  
6. 2A-1736 [1] HANDLE  
7. 6P-8971 [1] COVER ASSEM.  
9. 6P-8772 [1] COVER ASSEM.  
10. 6P-5207 [1] SEAL  
11. 3Y-5731 [2] WASHER  
12. 8P-0753 [1] BRACKET ASSEM.  
13. 6P-7073 [1] ROD  
14. 9S-1303 [1] PIN  
  3B-4607 [1] COTTER PIN  
15. 5B-9097 [1] NUT  
16. 3P-3937 [1] SHAFT  
  7L-0811 [1] DOWEL  
17. 2J-7295 [1] SPRING  
18. 0S-0509 [4] BOLT  
19. 5P-0532 H [1] FILM  
20. 9P-7361 C [1] FLANGE  
21. 9P-3697 C [1] BOOT  
  C   INDICATES CHANGE
  H   NOT SHOWN
 

#XMBP96740248
 

5A-8575: ANGLING BULLDOZER ARRANGEMENT

5A8575 ANGLING BULLDOZER ARRANGEMENT
Effective with Serial No. 13H3476-UP
XMBP96740248 XMBP9674
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5A-8265 [1] BASIC BULLDOZER ARRANGEMENT  
  5A-8266 Y [1] BLADE GROUP  
  4J-0787 Y [1] ARM AND BRACE GROUP  
  6J-9256 Y [1] TRUNNION GROUP  
  7J-4951 Y [1] C-FRAME GROUP  
  3G-7970 Y [1] CYLINDER MOUNTING GROUP  
  9S-6658 Y [1] BULLDOZER HOSE AND LINES GROUP  
  9S-6659 Y [1] CYLINDER AND VALVE GROUP (R.H.)  
  9S-6660 Y [1] CYLINDER AND VALVE GROUP (L.H.)  
  Y   SEPARATE ILLUSTRATION
 

#XMBP96740249
 

3Y-3104: BULLDOZER AR-STRAIGHT

3Y3104 STRAIGHT BULLDOZER ARRANGEMENT
Effective with Serial No. 53J3156-UP
XMBP96740249 XMBP9674
  For full view, you need register

Parts for your D7G TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3Y-3105 [1] BASIC BULLDOZER ARRANGEMENT  
  5A-8268 Y [1] BLADE GROUP  
  9J-3809 Y [1] PUSH ARM GROUP  
  6J-9256 Y [1] TRUNNION GROUP  
  9J-2275 Y [1] HYDRAULIC LINES GROUP  
  3G-7970 Y [1] CYLINDER MOUNTING GROUP  
  9S-6658 Y [1] BULLDOZER HOSE AND LINES GROUP  
  9S-6659 Y [1] CYLINDER AND VALVE GROUP (R.H.)  
  9S-6660 Y [1] CYLINDER AND VALVE GROUP (L.H.)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D7G :

LINES GP-RIPPER
3P-5595 LINES GP-RIPPER
LINES GP-DOZER
3P-5597 LINES GP-DOZER
VALVE GP-PRESSURE CONTROL
9J-5169 VALVE GP-PRESSURE CONTROL
3P-5599 LINES GP-PUMP
LINES GP-PUMP
3P-5599 LINES GP-PUMP
LINES GP-PUMP
3P-5598 LINES GP-PUMP
PUMP GP-VANE
9J-5058 PUMP GP-VANE
VALVE GP-PILOT
8J-7494 VALVE GP-PILOT
LINES GP-TILT CYLINDER
3P-5596 LINES GP-TILT CYLINDER
LINK GP-IMPLEMNET
3P-3279 LINK GP-IMPLEMNET
LINKAGE GP-IMPLEMENT
3P-3277 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
3P-3278 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6P-5747 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6P-5748 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6P-5749 LINKAGE GP-IMPLEMENT
5A-8575 ANGLING BULLDOZER ARRANGEMENT

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.