AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER BLOCK (4N2257 N/S) Effective with Serial No. 70V15654~70V16253 7N1203 Cylinder Block parts are shown on Page 9 980C


BASIC ENGINE
CYLINDER BLOCK GP
SUPPRESSION GP-SOUND
CYLINDER BLOCK GP

WHEEL LOADER 980C WHEEL LOADER 13B
 980C WHEEL LOADER 13B00300-UP (MACHINE) POWERED BY 3406 ENGINE XMBP9685 980C 13B   (1983)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-2257 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-2257 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-1203 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-6756 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-6039 CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4N-5114 COVER GP-CYLINDER BLOCK
 

#XMBP96850001
 

4N-2257: CYLINDER BLOCK GP

CYLINDER BLOCK (4N2257 N/S)
Effective with Serial No. 70V15654~70V16253
7N1203 Cylinder Block parts are shown on Page 9
j23244e XMBP9685
4N2257 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1650 [2] DOWEL  
2. 7N-1199 [1] PLATE  
3. 7N-0625 [1] GASKET  
4. 7N-1203 Y [1] CYLINDER BLOCK GROUP  
    (See Separate Illustration)
5. 4N-0683 [4] DOWEL  
6. 7N-0943 [6] LINER  
7. 2N-6210 [18] SEAL  
8. 9L-5854 [6] BAND  
9. 1S-9540 [2] DOWEL  
  3S-5496 [2] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#XMBP96850002
 

4N-2257: CYLINDER BLOCK GP

CYLINDER BLOCK (4N2257 N/S)
Effective with Serial No. 70V16254~70V16375
2W6756 Cylinder Block parts are shown on Page 9A
j24830e XMBP9685
4N2257 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1650 [2] DOWEL  
2. 7N-1199 [1] PLATE  
3. 7N-0625 [1] GASKET  
4. 2W-6756 YC [1] CYLINDER BLOCK GROUP  
    (See Separate Illustration)
5. 4N-0683 [4] DOWEL  
6. 1W-6280 C [6] LINNER  
7. 6V-5121 C [18] SEAL  
8. 9L-5854 [6] BAND  
9. 1S-9540 [2] DOWEL  
  3S-5496 [2] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#XMBP96850003
 

8N-9267: CYLINDER BLOCK GP

CYLINDER BLOCK (8N9267 N/S)
Effective with Serial No. 70V16376-UP
2W6039 Cylinder Block parts are shown on Page 9B
j24832e XMBP9685
8N9267 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1650 [2] DOWEL  
2. 7N-1199 [1] PLATE  
3. 7N-0625 [1] GASKET  
4. 2W-6039 RY [1] CYLINDER BLOCK GROUP  
    (See Separate Illustration)
5. 4N-0683 [4] DOWEL  
6. 1W-6280 [6] LINNER  
7. 6V-5121 [18] SEAL  
8. 9L-5854 [6] BAND  
9. 1S-9540 [2] DOWEL  
  3S-5496 [2] SEAL  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#XMBP96850004
 

7N-1203: CYLINDER BLOCK GP

7N1203 CYLINDER BLOCK GROUP
Effective with Serial No. 70V15654~70V16253
Part of Cylinder Block shown on Page 8
j23245e XMBP9685
7N1203 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 [3] PLUG  
2. 4N-6658 [1] BEARING  
3. 7M-7410 [2] PLUG  
4. 4N-0997 [1] COVER  
5. 4N-0998 [1] GASKET  
6. 0S-1594 [6] BOLT  
  5M-2894 [6] WASHER  
7. 4N-9881 [6] TUBE ASSEM.  
8. 4N-5857 [7] CAP  
9. 3P-1323 [14] BOLT  
  9H-1031 [14] WASHER  
10. 2M-6471 [2] PLUG  
11. 8S-9094 [1] DOWEL  
12. 9S-4190 [2] PLUG  
  2M-9780 [2] "O" RING  
13. 4N-0685 [6] BEARING  
14. 7H-3171 [2] PLUG  
15. 3J-5389 [1] PLUG  
16. 3J-5390 [5] PLUG  
17. 4N-9916 [6] SCREW  
18. 5M-6214 [1] PLUG  
 

#XMBP96850005
 

2W-6756: CYLINDER BLOCK GP

2W6756 CYLINDER BLOCK GROUP
Effective with Serial No. 70V16254~70V16375
Part of Cylinder Block shown on Page 8
j24833e XMBP9685
2W6756 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 [3] PLUG  
2. 4N-6658 [1] BEARING  
3. 7M-7410 [2] PLUG  
4. 1W-3133 [1] COVER  
5. 1W-3132 [1] GASKET  
6. 030-7571 [6] BOLT  
7. 4N-9881 [6] TUBE ASSEM.  
8. 4N-5857 [7] CAP  
9. 3P-1323 [14] BOLT  
  9H-1031 [14] WASHER  
10. 2M-6471 [2] PLUG  
11. 8S-9094 [1] PLUG  
12. 9S-4190 [2] PLUG  
  2M-9780 [2] SEAL  
13. 4N-0685 [6] BEARING  
14. 7H-3171 [3] PLUG  
15. 3J-5389 [1] PLUG  
16. 3J-5390 [5] PLUG  
17. 4N-9916 [6] BOLT  
18. 5M-6214 [1] PLUG  
19. 2W-7041 [1] COVER  
20. 4N-0790 [1] GASKET  
 

#XMBP96850006
 

2W-6039: CYLINDER BLOCK GP

2W6039 CYLINDER BLOCK GROUP
Effective with Serial No. 70V16376-UP
Part of Cylinder Block shown on Page 8A
j24956e XMBP9685
2W6039 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 [3] PLUG  
2. 4N-6658 [1] BEARING  
3. 7M-7410 [2] PLUG  
4. 1W-3133 [1] COVER  
5. 1W-3132 [1] GASKET  
6. 030-7571 [4] BOLT  
7. 4N-9881 [6] TUBE ASSEM.  
8. 4N-5857 [7] CAP  
9. 3P-1323 [14] BOLT  
  9H-1031 [14] WASHER  
10. 2M-6471 [2] PLUG  
11. 8S-9094 [1] PLUG  
12. 9S-4190 [2] PLUG  
  2M-9780 [2] SEAL  
13. 4N-0685 [6] BEARING  
14. 7H-3171 [3] PLUG  
15. 3J-5389 [1] PLUG  
16. 3J-5390 [5] PLUG  
17. 4N-9916 [6] BOLT  
18. 5M-6214 [1] PLUG  
19. 4K-1388 [1] SEAL  
20. 9S-8009 [1] PLUG  
 

#XMBP96850007
 

9N-2234: PANEL GP-SOUND SUPPRESSION

CYLINDER BLOCK PANEL (9N2234 N/S)
Effective with Serial No. 13B300~13B442
Part of 7V5115 Sound Suppression Arrangement listed on Page 315
AN ATTACHMENT
j23575e XMBP9685
9N2234 PANEL GP-SOUND SUPPRESSION Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2230 [1] BRACKET  
2. 066-7948 [3] BUMPER  
3. 0S-0509 [3] BOLT  
4. 5M-2894 [4] WASHER  
5. 1B-2790 [5] BOLT  
  9N-0869 [5] WASHER  
  9N-2231 [5] GROMMET ASSEM.  
6. 1W-4840 [1] PANEL ASSEM.  
7. 9N-2225 [1] CLIP  
8. 1W-4835 [1] PANEL ASSEM.  
9. 3B-1915 [1] BOLT  
  5H-3124 [1] SPACER  
 

#XMBP96850008
 

2W-0404: PANEL GP-SOUND SUPPRESSION

CYLINDER BLOCK PANEL (2W404 N/S)
Effective with Serial No. 13B443-UP
Part of 7V5115 Sound Suppression Arrangement listed on Page 315
AN ATTACHMENT
j24885e XMBP9685
2W0404 PANEL GP-SOUND SUPPRESSION Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9254 [1] PANEL ASSEM  
2. 0S-0509 [1] BOLT  
  5M-2894 [1] WASHER  
3. 2W-0405 [1] BRACKET  
4. 9M-5617 [1] GROMMET  
5. 2W-0403 [1] PANEL ASSEM  
6. 1B-2790 [6] BOLT  
  9N-0869 [6] WASHER  
  9N-2231 [6] GROMMET ASSEM  
 

#XMBP96850009
 

4N-5114: COVER GP-CYLINDER BLOCK

CYLINDER BLOCK COVER (4N5114 N/S)
Effective with Serial No. 70V15654-UP
j23246e XMBP9685
4N5114 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0996 [3] COVER  
2. 4N-0699 [3] GASKET  
3. 0S-1594 [6] BOLT  
4. 5M-2894 [6] WASHER  
5. 3J-5390 [1] PLUG  
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Block
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Idler Gear Shaft Pilot Bore
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Liners
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Liner Projection
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Bearings For Connecting Rods And Mains
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Disassembly and Assembly
Spacer Plate
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Piston Cooling Tubes
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Crankshaft Main Bearings
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Cylinder Liners
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Camshaft Bearings
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Service Magazine
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
New One-Piece Flywheel Housing Gasket{1157,1201}
1978/07/03
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Procedure To Retain Oil Pump When Pump Mounting Pad On Cylinder Block Is Broken{1201,1304}
1991/05/20
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Additional Parts Required For Remanufactured Short Block{1200}
1993/09/27
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/28
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1206,1212,1237}
1995/08/21
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
A New Piston Cooling Jet Assembly Has Been Released {1331}
2013/10/14

Caterpillar Parts SIS Catalog 980C :

CYLINDER BLOCK GP
4N-2257 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-1203 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-6756 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-6039 CYLINDER BLOCK GP
PANEL GP-SOUND SUPPRESSION
9N-2234 PANEL GP-SOUND SUPPRESSION
PANEL GP-SOUND SUPPRESSION
2W-0404 PANEL GP-SOUND SUPPRESSION
COVER GP-CYLINDER BLOCK
4N-5114 COVER GP-CYLINDER BLOCK

Truck sale:

Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MICHIGAN CAT
 
29,900 
Caterpillar 980C, Wheel Loaders, Construction


 
40,336 
Caterpillar 980C, Wheel Loaders, Construction


Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MILTON CAT
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
18.500 
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.