AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CRANKSHAFT (2W1732 N/S) Effective with Serial No. 70V15654-UP 1W6207 Crankshaft Assembly parts are shown on Page 12 980C


BASIC ENGINE
CRANKSHAFT GP
CAMSHAFT GP
PISTON & ROD GP
CAMSHAFT GP
PISTON & ROD GP
CAMSHAFT GP
CYLINDER HEAD GP

WHEEL LOADER 980C WHEEL LOADER 13B
 980C WHEEL LOADER 13B00300-UP (MACHINE) POWERED BY 3406 ENGINE XMBP9685 980C 13B   (1983)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT GP
2W-1732 CRANKSHAFT GP
CRANKSHAFT AS
1W-6207 CRANKSHAFT AS
 

#XMBP96850010
 

2W-1732: CRANKSHAFT GP

CRANKSHAFT (2W1732 N/S)
Effective with Serial No. 70V15654-UP
1W6207 Crankshaft Assembly parts are shown on Page 12
j24834e XMBP9685
2W1732 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6207 RY [1] CRANKSHAFT ASSEM.  
    (See Separate Illustration)
2. 7N-8947 [2] PLATE  
3. 7N-1999 [2] SEAL GROUP  
  5S-9022 [1] SEAL  
4. 4N-0848 [1] SLEEVE  
5. 1W-6589 [7] BEARING  
  8N-5422 H [7] BEARING (0.64mm Undersize)  
  8N-5423 H [7] BEARING (1.27mm Undersize)  
  8N-5424 H [7] BEARING (0.64mm Oversize)  
  8N-5425 H [7] BEARING (0.64mm Oversize 0.64mm Undersize)  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  H   NOT PART OF CRANKSHAFT GROUP
 

#XMBP96850011
 

1W-6207: CRANKSHAFT AS

1W6207 CRANKSHAFT ASSEMBLY
Effective with Serial No. 70V15654-UP
Part of Crankshaft
j24835e XMBP9685
1W6207 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0684 [1] PIN  
2. 9F-2247 [6] PLUG  
3. 1W-9302 [1] GEAR (80 Teeth)  
4. 7S-5005 [1] DOWEL  
 

#XMBP96850012
 

6N-4992: CAMSHAFT GP-SINGLE

CAMSHAFT (6N4992 N/S)
Effective with Serial No. 70V15654~70V16375
6N4991 Camshaft Assembly parts are shown on Page 13
j23249e XMBP9685
6N4992 CAMSHAFT GP-SINGLE Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-0509 [2] BOLT  
2. 4N-0342 [1] PLATE  
3. 6N-4991 Y [1] CAMSHAFT ASSEM.  
    (See Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#XMBP96850013
 

8N-9244: CAMSHAFT GP-SINGLE

CAMSHAFT (8N9244 N/S)
Effective with Serial No. 70V16376-UP
8N9245 Camshaft parts are shown on Page 13A
j24836e XMBP9685
8N9244 CAMSHAFT GP-SINGLE Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-0509 [2] BOLT  
2. 4N-0342 [1] PLATE  
3. 8N-9245 RY [1] CAMSHAFT ASSEM.  
    ( See Separate Illustration )
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#XMBP96850014
 

2W-0833: PISTON & ROD GP

CONNECTING ROD AND PISTON (2W833 N/S) -- 6 Required
Effective with Serial No. 70V15654~70V16375
j23251e XMBP9685
2W0833 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-1608 [1] PIN  
2. 8N-7295 [2] RETAINER  
3. 8N-1726 R [1] ROD ASSEM.  
  8N-2018 [1] BEARING  
4. 6N-8942 [2] BOLT  
  8L-3441 [2] NUT  
5. 8N-5426 [1] BEARING  
  8N-5427 H [1] BEARING (Undersize 0.635mm)  
  8N-5428 H [1] BEARING (Undersize 1.27mm)  
6. 8N-1606 [1] BODY ASSEM.  
7. 7N-7078 J [1] RING (Oil)  
8. 2P-2817 J [1] RING (Intermediate)  
9. 8N-0502 J [1] RING (Top)  
  8N-0822 H [1] RING GROUP  
    (Consiste of Parts Marked j)
  H   NOT PART OF CONNECTING ROD AND
  R   REMFG PART MAY BE AVAILABLE
 

#XMBP96850015
 

6N-4991: CAMSHAFT AS

6N4991 CAMSHAFT ASSEMBLY
Effective with Serial No. 70V15654~70V16375
Part of Camshaft shown on Page 12
j23250e XMBP9685
6N4991 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-6682 [1] GEAR (64 Teeth)  
2. 1B-8705 [1] KEY  
 

#XMBP96850016
 

7N-3516: PISTON & ROD GP

CONNECTING ROD AND PISTON (7N3516 N/S) -- 6 Required
Effective with Serial No. 70V16376-UP
j24838e XMBP9685
7N3516 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-1608 [1] PIN  
2. 8N-7295 [2] RETAINER  
3. 8N-1726 R [1] ROD ASSEM.  
  8N-2018 [1] BEARING  
4. 6N-8942 [2] BOLT  
  8L-3441 [2] NUT  
5. 1W-7524 [1] BEARING  
  8N-5427 H [1] BEARING ( Undersize 0.635mm )  
  8N-5428 H [1] BEARING ( Undersize 1.27mm)  
6. 1W-9372 R [1] BODY ASSEM.  
7. 7N-7078 L [1] RING ( Oil )  
8. 2P-2817 L [1] RING ( Intermediate )  
9. 1W-9460 L [1] RING ( Top )  
  1W-8922 H [1] RING GROUP  
    ( Consiste of Parts Marked l )
  H   NOT PART OF CONNECTING ROD AND
  R   REMFG PART MAY BE AVAILABLE
 

#XMBP96850017
 

8N-9245: CAMSHAFT AS

8N9245 CAMSHAFT ASSEMBLY
Effective with Serial No. 70V16376-UP
Part of Camshaft shown on Page 12A
j24837e XMBP9685
8N9245 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-8254 [1] GEAR (64 Teeth)  
2. 1B-8705 [1] KEY  
 

#XMBP96850018
 

4N-2270: CYLINDER HEAD GP

CYLINDER HEAD (4N2270 N/S)
Effective with Serial No. 70V15654~70V16375
Cylinder Head parts are shown on Page 15
j23255e XMBP9685
4N2270 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-7253 [6] GASKET  
2. 2S-2251 [6] SEAL  
3. 1W-7884 [6] ADAPTER ASSEM.  
4. 5F-4899 [12] BOLT  
5. Y [1] CYLINDER HEAD  
    (See Separate Illustration)
6. 6L-7442 [6] STUD  
7. 3J-5390 [3] PLUG  
8. 3J-5389 [2] PLUG  
9. 7N-0626 [1] GASKET  
10. 4S-6137 [11] STUD (81mm Long)  
11. 2H-3750 [20] BOLT  
  5H-1504 [20] WASHER  
12. 4N-2269 [24] SEAL  
13. 3J-5389 [1] PLUG  
    (For use Without Air Compressor)
14. 7L-0520 [1] STUD (51mm Long)  
15. 3S-5496 [2] SEAL  
16. 7M-7410 [1] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#XMBP96850019
 

1W-1439: CYLINDER HEAD GP

CYLINDER HEAD (1W1439 N/S)
Effective with Serial No. 70V16376-UP
Cylinder Head parts are shown on Page 15A
j24839e XMBP9685
1W1439 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-7253 [6] GASKET  
2. 2S-2251 [6] SEAL  
3. 1W-2950 [6] ADAPTER  
4. 5F-4899 [12] BOLT  
5. Y [1] CYLINDER HEAD  
    (See Separate Illustration)
6. 6L-7442 [6] STUD  
7. 3J-5390 [3] PLUG  
8. 3J-5389 [2] PLUG  
9. 2W-7983 [1] GASKET  
10. 4S-6137 [11] STUD (81mm Long)  
11. 2H-3750 [20] BOLT  
  5H-1504 [20] WASHER  
12. 4W-1055 [24] SEAL  
13. 3J-5389 [1] PLUG  
    (Not for Use With Air Compressor Installation)
14. 7L-0520 [1] STUD (51mm Long)  
15. 3S-5496 [2] SEAL  
16. 7M-7410 [1] PLUG  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Special Handling Information For Installation Of 2W1733 Or 2W1734 Crankshaft Seal Group{1160, 1161, 1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Technical Information Bulletin
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
Specifications
Crankshaft (Earlier)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Crankshaft (Later)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Crankshaft Main Bearings
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Crankshaft Rear Seal And Wear Sleeve
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Crankshaft
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Service Magazine
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
New Crankshaft Seal Groups Used On More 3400 Series Engines{1160,1161}
1985/03/11
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Some Wobble Is Acceptable In Rubber Vibration Dampers For Crankshafts{1205}
1977/10/31
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Crankshaft Seal Groups Provide Increased Protection From Dirt And Dust{1160,1161}
1991/07/08
New 3406 (11N) Machine Engine Uses Different Components Than 3406 (70V) Machine Engine{1202,1218,1219}
1992/06/15
Oil Holes In Crankshaft Main And Rod Journals{1202}
1992/11/09
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/03
Wear Sleeve Removal Tooling May "Mark" The Crankshaft{1202,1161}
1995/08/14
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly {1205}
1997/01/27
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/12
A New Type of Main Bearing is Available {1202, 1203}
2005/03/07
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Inspection and/or Repair Procedure to Replace Crankshafts on Machine Engines {1202}
2006/05/01

Caterpillar Parts SIS Catalog 980C :

COVER GP-CYLINDER BLOCK
4N-5114 COVER GP-CYLINDER BLOCK
PANEL GP-SOUND SUPPRESSION
2W-0404 PANEL GP-SOUND SUPPRESSION
PANEL GP-SOUND SUPPRESSION
9N-2234 PANEL GP-SOUND SUPPRESSION
CYLINDER BLOCK GP
2W-6039 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-6756 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7N-1203 CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-9267 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-2257 CYLINDER BLOCK GP
CRANKSHAFT AS
1W-6207 CRANKSHAFT AS
CAMSHAFT GP-SINGLE
6N-4992 CAMSHAFT GP-SINGLE
CAMSHAFT GP-SINGLE
8N-9244 CAMSHAFT GP-SINGLE
PISTON & ROD GP
2W-0833 PISTON & ROD GP
CAMSHAFT AS
6N-4991 CAMSHAFT AS
PISTON & ROD GP
7N-3516 PISTON & ROD GP
CAMSHAFT AS
8N-9245 CAMSHAFT AS
CYLINDER HEAD GP
4N-2270 CYLINDER HEAD GP

Truck sale:

Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MICHIGAN CAT
 
29,900 
Caterpillar 980C, Wheel Loaders, Construction


 
40,336 
Caterpillar 980C, Wheel Loaders, Construction


Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MILTON CAT
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
18.500 
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.