AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

RIPPER LINES (8P4398 N/S)--Type 3--Part 2 of 2 Part of 8P3076 and 8P3077 Hydraulic Control Arrangements D6D


HYDRAULIC SYSTEM
LINES GP-RIPPER
CYLINDER GP
IMPLEMENTS
LINKAGE GP
BULLDOZER GP

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 30X
 D6D TRACTOR / DIRECT DRIVE / 30X02070-UP (MACHINE) POWERED BY 3306 ENGINE XMBP9691 D6D 30X   (1981)

HYDRAULIC SYSTEM

LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8J-7050 LINES GP-RIPPER
 

#XMBP96910360
 

8P-4398: LINES GP-RIPPER

RIPPER LINES (8P4398 N/S)--Type 3--Part 2 of 2
Part of 8P3076 and 8P3077 Hydraulic Control Arrangements
j23048e XMBP9691
8P4398 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-3916 [2] CLIP  
  7S-3919 [2] CLIP  
2. 0S-1594 [2] BOLT  
3. 5P-6412 CH HOSE 10cm  
4. 5M-2894 [18] WASHER  
5. 0S-1571 [16] BOLT  
6. 1P-4576 [4] FLANGE  
7. 8P-8194 [1] TUBE ASSEM.  
8. 1P-4577 [4] FLANGE  
9. 4J-0520 [2] SEAL  
10. 8P-8198 [1] TUBE ASSEM.  
11. 8P-8196 [1] TUBE ASSEM.  
12. 0S-1587 [4] BOLT  
13. 5P-8245 C [6] WASHER  
14. 3T-5958 C [1] TUBE ASSEM.  
15. 5P-6412 CH HOSE 16cm  
16. 5P-2230 C [4] CLAMP  
17. 0S-1585 [2] BOLT  
18. 1A-1460 [4] BOLT  
  1D-4719 [4] NUT  
  5P-1076 C [8] WASHER  
19. 8P-8192 [1] TUBE ASSEM.  
20. 8P-4407 [1] BRACKET ASSEM.  
  9F-2978 [2] NUT (Weld)  
  C   INDICATES CHANGE
  H   ORDER BY THE CM
 

#XMBP96910361
 

8J-7050: LINES GP-RIPPER

8J7050 RIPPER LINES GROUP
Part of 8J7592 Ripper Arrangement listed on Page 335
j23640e XMBP9691
8J7050 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-7051 [2] HOSE ASSEM.  
  5P-0180 H HOSE 119cm  
2. 3S-8360 [1] STEM ASSEM. (45 degrees)  
3. 3S-7166 [2] SLEEVE  
4. 5S-6102 [1] STEM ASSEM. (90 degrees)  
5. 4J-5267 [2] SEAL  
6. 0S-1588 [8] BOLT  
  5M-2894 [8] WASHER  
7. 1P-4577 [4] FLANGE  
8. 4J-0520 [2] SEAL  
9. 0S-1594 [1] BOLT  
10. 1D-4717 [1] NUT  
11. 1L-4684 [2] CLAMP  
  H   ORDER BY THE CM
 

#XMBP96910362
 

7J-8302: CYLINDER GP

7J8302 BULLDOZER CYLINDER GROUP
Part of 3Y842 and 3Y843 Bulldozer Arrangements listed on Page 323
j22843e XMBP9691
7J8302 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2007 [1] PISTON ASSEM.  
2. 9J-2010 [2] INSERAT  
3. 9J-2009 [1] PLUNGER  
4. 8J-9282 [2] SPACER  
5. 9J-2008 [1] PLUNGER  
6. 5J-5402 [1] SEAL ASSEM.  
7. 5P-1839 [1] BOLT  
  8J-4359 [1] WASHER  
8. 1M-1571 [1] RING  
9. 7J-8301 R [1] CYLINDER ASSEM.  
10. 4J-6374 [2] BEARING  
11. 8J-5912 [1] SET SCREW  
12. 7J-6461 [1] GROWN  
13. 7J-8294 R [1] ROD  
14. 3B-2968 [4] BOLT  
15. 5P-8248 [4] WASHER  
16. 3J-6559 [1] CAP  
17. 3J-6572 [12] SHIM  
18. 1K-6982 [1] SEAL  
19. 5J-0964 [1] SEAL  
20. 2K-6830 [1] RING  
21. 1H-8128 [1] SEAL  
22. 3Y-8949 [1] SEAL  
23. 7J-8295 [1] HEAD  
  R   REMFG PART MAY BE AVAILABLE
 

#XMBP96910363
 

8J-6868: CYLINDER GP-LIFT

8J6868 BULLDOZER CYLINDER GROUP
Part of 3G4208 Straight Bulldozer Arrangement listed on Page 324
j22842e XMBP9691
8J6868 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2007 [1] PISTON ASSEM.  
2. 9J-2010 [2] INSERT  
3. 9J-2009 [1] PLUNGER  
4. 8J-9282 [2] SPACER  
5. 9J-2008 [1] PLUNGER  
6. 5J-5402 [1] SEAL ASSEM.  
7. 5P-1839 [1] BOLT  
  8J-4359 [1] WASHER  
8. 1M-1571 [1] RING  
9. 8J-6867 R [1] CYLINDER ASSEM.  
10. 4J-6374 [2] BEARING  
11. 8J-5912 [1] SET SCREW  
12. 7J-6461 [1] CROWN  
13. 8J-6866 R [1] ROD  
14. 3B-2968 [4] BOLT  
15. 5P-8248 [4] WASHER  
16. 3J-6559 [1] CAP  
17. 3J-6572 [12] SHIM  
18. 1K-6982 [1] SEAL  
19. 5J-0964 [1] SEAL  
20. 2K-6830 [1] RING  
21. 1H-8128 [1] SEAL  
22. 3Y-8949 [1] SEAL  
23. 7J-8295 [1] HEAD  
  R   REMFG PART MAY BE AVAILABLE
 

#XMBP96910364
 

8J-1779: CYLINDER GP-RIPPER LIFT

8J1779 RIPPER CYLINDER GROUP
Part of 8J7592 Ripper Arrangement listed on Page 335
j7102e XMBP9691
8J1779 CYLINDER GP-RIPPER LIFT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-1772 [1] PISTON  
  2J-0564 [1] NUT  
  0S-1588 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  1H-3305 [2] FLANGE  
  2K-4507 [1] BUSHING  
    (Port of 8J1778 Cylinder Assem.)
  1J-2674 [1] RING  
  5J-4993 [1] SEAL ASSEM.  
  0S-1594 [2] BOLT  
  1D-4717 [2] NUT  
  3B-4506 [2] LOCKWASHER  
  8J-1778 R [1] CYLINDER ASSEM.  
  2K-2939 [1] SEAL  
  2K-2940 [1] WASHER  
  8J-1769 [1] MANIFOLD ASSEM.  
  0S-1591 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  4F-7391 [1] SEAL  
  8J-1777 R [1] ROD ASSEM.  
  8J-1770 [1] HEAD  
  5J-3620 [1] SEAL  
  5J-0964 [1] SEAL  
  1K-6982 [1] SEAL  
  2K-4507 [1] BUSHING  
    (Port of 8J1777 Rod Assem.)
  1J-2814 [4] BOLT  
  3B-4518 [4] LOCKWASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#XMBP96910365
 

8P-5038: LINKAGE GP-IMPLEMENT

8P5038 HYDRAULIC HAND CONTROL GROUP--Bulldozer
Part of 8P3074 and 8P3076 Hydraulic Control Arrangements
j23690e XMBP9691
8P5038 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [1] HANDLE  
2. 8P-2480 [1] LEVER  
3. 0S-1571 [2] BOLT  
4. 1D-4717 [4] NUT  
5. 9P-0468 [1] CLAMP  
6. 8P-5048 [1] LEVER ASSEM.  
7. 8P-7352 [1] SEAL  
8. 0S-1591 [1] BOLT  
9. 6P-5209 [1] COVER  
  4B-1291 [4] SCREW  
10. 6P-5208 [1] GUIDE  
11. 2J-7295 [1] SPRING  
12. 6P-5205 [1] BRACKET ASSEM.  
  9F-5647 [2] BEARING  
13. 4D-4065 [3] ROD END  
14. 1B-4205 [6] NUT  
15. 8P-2478 [1] ROD  
16. 2M-8340 [1] ROD END  
17. 0S-0175 [3] PIN  
18. 3B-4617 [3] COTTER PIN  
19. 8P-2496 [1] LEVER  
20. 6F-7010 [2] ROD END  
21. 8P-5328 [1] ROD  
22. 5S-9704 [1] SHAFT  
  3K-2889 C [1] LOCKNUT  
  5P-8247 C [1] WASHER  
23. 0S-1585 C [1] BOLT  
  1S-4305 C [1] WASHER (25.4mm O.D.)  
  1J-8965 [1] WASHER (38mm O.D.)  
24. 8P-5324 [1] SPACER  
25. 8P-5322 [1] BRACKET ASSEM.  
  8P-5323 [1] SHAFT  
26. 7B-3235 [3] BOLT  
27. 5P-8245 C [4] WASHER  
28. 0S-1622 [1] BOLT  
  1K-6872 [1] LOCKNUT  
29. 1D-4719 [3] NUT  
30. 9G-8854 [1] BELLCRANK  
31. 0S-1594 C [1] BOLT  
  8M-9124 C [1] WASHER (22.5mm O.D.)  
  8M-4069 [1] WASHER (38mm O.D.)  
32. 6D-3787 [2] BEARING  
33. 0S-1587 [1] BOLT  
34. 8P-5326 [1] ROD  
35. 0S-1590 [1] BOLT  
36. 5M-2894 C [5] WASHER  
37. 0S-1588 [4] BOLT  
38. 8S-9089 C [1] BOLT  
39. 8P-2483 [1] LEVER  
40. 3P-3942 [1] SHAFT  
  1B-8704 [2] KEY  
41. 5V-6103 C [1] SPACER  
42. 3B-8489 [1] FITTING  
43. 6D-5974 [2] BEARING  
  5P-8166 J [1] FILM  
  C   INDICATES CHANGE
  J   MOUNTED ON SEAT SUPPORT (R.H.)
 

#XMBP96910366
 

8P-5039: LINKAGE GP-IMPLEMENT

8P5039 HYDRAULIC HAND CONTROL GROUP--Bulldozer and Tilt
Part of 8P3075 and 8P3077 Hydraulic Control Arrangements
j23637e XMBP9691
8P5039 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-1736 [1] HANDLE  
2. 8P-2480 [1] LEVER  
3. 6P-5205 [1] BRACKET ASSEM  
  9F-5647 [2] BEARING  
4. 8P-7352 [1] SEAL  
5. 6P-5209 [1] COVER  
  4B-1291 [4] SCREW  
6. 9P-0468 [1] CLAMP  
7. 8P-2481 [1] LEVER ASSEM  
  9F-5647 [2] BEARING  
8. 2J-7295 [1] SPRING  
9. 6P-5208 [1] GUIDE  
10. 0S-1591 [1] BOLT  
11. 1D-4717 [3] NUT  
12. 5B-9079 [2] NUT  
13. 5J-5315 [2] ROD END  
14. 2L-6267 [2] LOCKNUT  
15. 4D-4065 [5] ROD END  
16. 1B-4205 [10] NUT  
17. 8P-2478 [1] ROD  
18. 2M-8340 [2] ROD END  
19. 8P-2479 [1] ROD  
20. 8P-2496 [1] LEVER  
21. 6D-3787 C [4] BEARING  
22. 0S-0175 [5] PIN  
23. 3B-4617 [5] COTTER PIN  
24. 8P-2495 [1] LEVER  
25. 6F-7010 [3] ROD END  
26. 8P-5328 [1] ROD  
27. 8P-5330 [1] ROD  
28. 7B-3235 [3] BOLT  
29. 5P-8245 C [4] WASHER  
30. 8P-5322 [1] BRACKET ASSEM  
  8P-5323 [1] SHAFT  
31. 9G-8854 C [2] BELLCRANK  
32. 0S-1622 [2] BOLT  
  1K-6872 [2] LOCKNUT  
33. 1D-4719 [5] NUT  
34. 5J-5326 [1] WASHER  
35. 0S-1587 [2] BOLT  
36. 0S-1571 [2] BOLT  
37. 3P-3937 [1] SHAFT  
38. 8P-5326 [1] ROD  
39. 8P-5332 [1] ROD  
40. 6D-5974 C [4] BEARING  
41. 0S-1588 C [4] BOLT  
42. 8M-9124 C [1] WASHER  
43. 8S-9089 C [1] BOLT  
44. 8P-2483 [1] LEVER  
45. 5S-9704 [2] SHAFT  
  3K-2889 C [2] NUT  
  5P-8247 C [2] WASHER  
46. 0S-1585 C [2] BOLT  
  1J-8965 [2] WASHER  
47. 3P-3935 [1] SHAFT ASSEM.  
  1B-8704 [1] KEY  
48. 7L-0811 [1] DOWEL  
49. 0S-1594 C [1] BOLT  
  8M-4069 [1] WASHER  
50. 5V-6103 C [1] SPACER  
51. 3B-8489 C [2] FITTING  
52. 1S-4305 C [2] WASHER  
53. 5M-2894 C [4] WASHER  
  5P-8161 CJ [1] FILM  
  C   INDICATES CHANGE
  J   MOUNTED ON TOP OF R.H. SEAT SU
 

#XMBP96910367
 

8P-5040: LINKAGE GP-IMPLEMENT

8P5040 HYDRAULIC HAND CONTROL GROUP--Ripper
Part of 8P3076 and 8P3077 Hydraulic Control Arrangements
j14705e XMBP9691
8P5040 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-0952 [1] CLAMP  
2. 3J-1545 [1] ROD  
3. 0L-0829 [1] HANDLE  
4. 3B-1915 [1] BOLT  
5. 1D-4717 [6] NUT  
6. 0S-1571 [1] BOLT  
7. 0L-1143 [4] BOLT  
8. 3B-4506 [6] LOCKWASHER  
9. 1J-8490 [1] ROD  
10. 1B-0676 [2] PIN  
  3B-4615 [2] COTTER PIN  
11. 5B-9079 [1] NUT  
12. 0S-1588 [2] BOLT  
  4B-4278 [2] WASHER  
13. 1J-6239 [2] BEARING ASSEM.  
14. 1F-5403 [1] END  
15. 8P-7043 [1] SUPPORT ASSEM.  
16. 5J-8135 [1] SHAFT ASSEM.  
  3Y-2121 J [1] FILM  
  J   MOUNTED ON TOP OF RH CONSOLE B
 

#XMBP96910368
 

3Y-0842: STRAIGHT BULLDOZER ARRANGEMENT

3Y842 STRAIGHT BULLDOZER ARRANGEMENT
Effective with Serial No. 17H4389--UP
(Effective with Vehicle Serial No. 30X2070--UP)
Only separate parts Serviced
XMBP96910368 XMBP9691
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-3468 [1] STRAIGHT BULLDOZER ARRANGEMENT-BASIC  
  8J-4657 Y [1] BLADE GROUP  
  3J-4359 Y [1] PUSH ARM AND BRACE GROUP  
  4J-2848 Y [1] TRUNNION GROUP  
    (Parts of 8J3468 Bulldozer Arrangement)
  9J-2697 Y [1] CYLINDER MOUNTING GROUP  
  7J-8302 Y [2] BULLDOZER CYLINDER GROUP  
  9P-4336 Y [1] BULLDOZER LINES GROUP  
  2J-1402 Y [1] CYLINDER GROUP  
  2P-6053 Y [1] TILT CYLINDER LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#XMBP96910369
 

3Y-0843: ANGLING BULLDOZER ARRANGEMENT

3Y843 ANGLING BULLDOZER ARRANGEMENT
Effective with Serial No. 18H5424--UP
(Effective with Vehicle Serial No. 30X2070--UP)
Only separate parts Serviced
XMBP96910369 XMBP9691
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7J-1755 [1] ANGLING BULLDOZER ARRANGEMENT--BASIC  
  9J-8528 Y [1] BLADE GROUP  
  9J-9150 Y [1] BRACE GROUP  
  9J-9469 Y [1] C--FRAME GROUP  
  4J-2848 Y [1] TRUNNION GROUP  
  9J-2697 Y [1] CYLINDER MOUNTING GROUP  
  7J-8302 Y [2] BULLDOZER CYLINDER GROUP  
  9P-4336 Y [1] BULLDOZER LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D6D :

LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
LINES GP-TILT CYLINDER
3G-6662 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
2P-6053 LINES GP-TILT CYLINDER
LINES GP-RIPPER
8J-7050 LINES GP-RIPPER
CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP-LIFT
8J-6868 CYLINDER GP-LIFT
CYLINDER GP-RIPPER LIFT
8J-1779 CYLINDER GP-RIPPER LIFT
LINKAGE GP-IMPLEMENT
8P-5038 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
8P-5039 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
8P-5040 LINKAGE GP-IMPLEMENT
3Y-0842 STRAIGHT BULLDOZER ARRANGEMENT

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.