AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T2098 LIFT CYLINDER GROUP - 120.7mm Bore X 711.0mm Stroke - 2 Groups Required Effective with Serial No. 78Y1112 - UP & 44Z623 - UP 953


HYDRAULIC SYSTEM
CYLINDER GP
KICKOUT & POSITIONER GP

TRACK LOADER 953 TRACK LOADER 44Z
 953 TRACK TYPE LOADER 44Z00001-UP (MACHINE) POWERED BY 3204 ENGINE XMBP9696 953 44Z   (1981)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-LIFT
4T-0263 CYLINDER GP-LIFT
CYLINDER GP
4T-2098 CYLINDER GP
CYLINDER GP
4T-2098 CYLINDER GP
CYLINDER GP-TILT
1U-0418 CYLINDER GP-TILT
CYLINDER GP-BUCKET
9J-4892 CYLINDER GP-BUCKET
CYLINDER GP-SIDE DUMP
9T-0107 CYLINDER GP-SIDE DUMP
 

#XMBP96960620
 

4T-2098: CYLINDER GP

4T2098 LIFT CYLINDER GROUP - 120.7mm Bore X 711.0mm Stroke - 2 Groups Required
Effective with Serial No. 78Y1112 - UP & 44Z623 - UP
j32443e XMBP9696
4T2098 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-2099 R [1] CYLINDER ASSEM.  
  [2] LUG  
2. 1U-0563 [1] BEARING  
3. 6V-2710 [1] BOLT  
4. 3S-6162 [1] WASHER  
5. 4T-9248 [1] RING  
6. 4T-8588 [1] SEAL ASSEM.  
7. 8J-5965 [1] PISTON  
8. 5J-3620 [1] SEAL  
9. 5J-0964 [1] SEAL  
10. 5H-6734 [1] SEAL  
  2J-3961 [1] RING  
11. 8T-5668 C [1] RING  
12. 1K-6982 [1] SEAL  
13. 4T-2493 R [1] ROD ASSEM.  
14. 3G-3910 [1] CROWN  
15. 9T-4763 C [1] HEAD  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#XMBP96960621
 

1U-0418: CYLINDER GP-TILT

1U418 TILT CYLINDER GROUP - 139.7mm Bore X 478.0mm Stroke
Effective with Serial No. 78Y1 - UP & 44Z1 - UP
j20337e XMBP9696
1U0418 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6899 [1] NUT  
2. 1U-0533 [1] PISTON  
3. 1U-0539 R [1] CYLINDER ASSEM.  
4. 3G-5111 [1] BEARING  
5. 2H-9247 [1] SEAL  
  2K-2961 [1] RING  
6. 1U-0474 [1] HEAD  
7. 1D-4638 [2] BOLT  
  5P-8250 [2] WASHER  
8. 1U-0538 R [1] ROD ASSEM.  
9. 3G-5111 [1] BEARING  
10. 2J-1411 [1] SEAL  
11. 5J-8300 [1] SEAL  
12. 6J-6915 [1] SEAL  
13. 1U-0535 [1] WASHER  
14. 8J-8767 [1] SEAL ASSEM.  
15. 7J-1731 [1] RING  
  R   REMFG PART MAY BE AVAILABLE
 

#XMBP96960622
 

9J-4892: CYLINDER GP-BUCKET

9J4892 CYLINDER GROUP (2V9862 N/S) - 101.6mm Bore X 257.0mm Stroke - 2 Groups Required
Part of 3V6114 and 8V7365 Multi-Purpose Bucket Arrangements listed on Pages 352
and 352A
For use with Machine Serial No. 78Y
AN ATTACHMENT
j20534e XMBP9696
9J4892 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-4891 [1] CYLINDER ASSEM.  
2. 2V-4617 [4] LUG  
3. 8J-5667 [1] BEARING  
4. 7K-9204 H [2] SEAL  
5. 2J-3950 [1] NUT  
6. 1H-8128 [1] SEAL  
7. 2K-6830 [1] RING  
8. 6J-6917 [1] SEAL  
9. 5J-8200 [1] SEAL  
10. 1K-6981 [1] SEAL  
11. 8J-5668 [1] ROD ASSEM.  
12. 7J-9688 [1] BEARING  
13. 7K-9202 H [2] SEAL  
14. 0S-1625 [4] BOLT  
  5P-8247 [4] WASHER  
15. 7J-6475 [1] HEAD  
16. 5J-5402 [1] SEAL ASSEM.  
17. 6J-2797 [1] RING  
18. 6J-2798 [1] PISTON  
  H   NOT PART OF 9J4892 CYLINDER GROUP
 

#XMBP96960623
 

9T-0107: CYLINDER GP-SIDE DUMP

9T107 SIDE DUMP BUCKET CYLINDER GROUP
Part of 9V9519 Side Dump Bucket Arrangement listed on Page 352B
AN ATTACHMENT
j27621e XMBP9696
9T0107 CYLINDER GP-SIDE DUMP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-0204 [1] CYLINDER ASSEM.  
2. 6S-3459 [1] BEARING  
  7K-9203 [2] SEAL  
3. 7J-6462 [1] HEAD  
4. 1H-8128 [1] SEAL  
  2K-6830 [1] RING  
5. 7J-6461 [1] CROWN  
6. 9T-0206 [1] ROD ASSEM.  
7. 1K-6981 [1] SEAL  
8. 5J-8200 [1] SEAL  
9. 6J-6917 [1] SEAL  
10. 7J-6469 [1] PISTON  
11. 5J-5402 [1] SEAL ASSEM.  
12. 6J-2797 [1] RING  
13. 5P-8250 [1] WASHER  
14. 7J-5639 [1] BOLT  
    The Following Kit are Available:
  8T-1370 [1] SEAL KIT  
    (Includes Seal, Ring)
 

#XMBP96960624
 

3G-1296: CYLINDER GP

3G1296 RIPPER CYLINDER GROUP
Part of Ripper Mounting and Cylinder shown on Page 357
j29661e XMBP9696
3G1296 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1292 [1] CYLINDER ASSEM.  
2. 2M-9780 [1] SEAL  
3. 7J-5639 [1] BOLT  
4. 8J-7415 [1] WASHER  
5. 6J-2797 [1] RING  
6. 5J-5402 [1] SEAL ASSEM.  
7. 7J-6469 [1] PISTON  
8. 9S-4190 [1] PLUG  
9. 6J-6917 [1] SEAL  
10. 5J-8200 [1] SEAL  
11. 1K-6981 [1] SEAL  
12. 3G-1294 [1] ROD ASSEM.  
13. 7J-6462 [1] HEAD  
14. 7J-6461 [1] CROWN  
15. 2K-6830 [1] RING  
  1H-8128 [1] SEAL  
 

#XMBP96960625
 

7P-7016: POSITIONER & KICKOUT GP

POSITIONER AND KICKOUT (7P7016 N/S) - Part 1 of 2
Effective with Serial No. 78Y1~78Y806 & 44Z1~44Z316
j20318e XMBP9696
7P7016 POSITIONER & KICKOUT GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3Y-7920 [1] PLATE  
2. 0L-1351 [2] BOLT  
3. 5M-2894 [4] WASHER  
4. 7P-4723 [1] LEVER ASSEM.  
5. 5P-5015 [4] BEARING  
6. 0S-1591 [2] BOLT  
7. 1D-4717 [4] NUT  
8. 7P-9789 [1] LEVER  
9. 1B-8706 [3] KEY  
10. 1B-0676 [3] PIN  
11. 3B-4615 [3] COTTER PIN  
12. 1A-9252 [3] END  
13. 1B-4203 [5] NUT  
14. 8G-1312 [1] ROD  
15. 6V-1245 [1] ROD END  
16. 2D-2285 [1] BOLT  
17. 7M-9847 [1] SPRING  
18. 7P-3983 [1] LEVER  
19. 8G-3525 [1] LEVER  
20. 8G-1029 [1] ROLLER  
  8M-5346 [1] SUPPORT  
  3D-8823 [1] BEARING  
21. 0S-1587 [1] BOLT  
  1K-6872 [1] LOCKNUT  
22. 7P-3439 [1] LEVER  
23. 7P-8633 [1] SHAFT  
24. 6D-3787 [2] BEARING  
25. 7P-8693 [1] TUBE ASSEM.  
26. 010-2461 [1] SETSCREW  
27. 4B-4283 [2] WASHER  
28. 0S-1594 [2] BOLT  
29. 5P-1075 [4] WASHER  
30. 7P-3416 [1] GUARD  
31. 7J-8744 [1] WASHER  
32. 7P-8847 [1] ROD  
33. 7P-3420 [1] SHAFT  
34. 0L-1352 [2] BOLT  
35. 7P-3417 [1] SPACER  
36. 7P-8848 [1] BLOCK  
37. 6F-3890 [1] SPACER  
38. 8G-3518 [1] CLIP  
 

#XMBP96960626
 

7P-7016: POSITIONER & KICKOUT GP

POSITIONER AND KICKOUT (7P7016 N/S) - Part 2 of 2
Effective with Serial No. 78Y1~78Y806 & 44Z1~44Z316
j20319e XMBP9696
7P7016 POSITIONER & KICKOUT GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [2] BOLT  
2. 9L-7372 [1] SPRING  
3. 7P-8844 [1] COVER  
4. 0L-1351 [5] BOLT  
5. 5P-1075 [6] WASHER  
6. 1D-4642 [2] BOLT  
  5P-8250 [2] WASHER  
7. 7P-8845 [1] BAR ASSEM.  
8. 2B-0860 [1] NUT  
9. 7P-8683 [1] ROD ASSEM.  
10. 1D-5119 [1] NUT  
11. 7P-8685 [1] LEVER ASSEM.  
  1K-4675 [1] BUSHING  
12. 1D-4610 [1] BOLT  
13. 6K-8716 [5] WASHER  
14. 7P-8687 [1] SHAFT  
15. 4J-8820 [2] SPACER  
16. 9L-9132 [1] WASHER  
17. 7P-1810 [1] BEARING ASSEM.  
18. 7P-8676 [1] SUPPORT ASSEM.  
19. 7P-8672 [1] PLATE  
20. 0S-1619 [1] BOLT  
  2K-4973 [1] LOCKNUT  
  8M-7145 [1] WASHER  
21. 5M-2894 [1] WASHER  
22. 7P-8688 [1] PLATE  
23. 7P-8838 [1] BRACKET ASSEM.  
24. 9F-2978 [5] NUT  
25. 7P-8678 [1] PLATE  
26. 3J-5397 [1] ROLLER  
27. 4D-6432 [1] LOCKNUT  
  5P-8244 [1] WASHER  
28. 7P-3414 [1] LEVER  
29. 0S-1571 [1] BOLT  
  0L-1319 [1] WASHER  
30. 7P-3415 [1] SHAFT  
31. 6D-3787 [1] BEARING  
 

#XMBP96960627
 

7P-7016: POSITIONER & KICKOUT GP

POSITIONER AND KICKOUT (7P7016 N/S) - Part 1 of 2
Effective with Serial No. 78Y807~78Y827 & 44Z317~44Z339
j23854e XMBP9696
7P7016 POSITIONER & KICKOUT GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3Y-7920 [1] PLATE  
2. 0L-1351 [2] BOLT  
3. 5M-2894 [4] WASHER  
4. 7P-4723 [1] LEVER ASSEM.  
5. 5P-5015 [4] BEARING  
6. 0S-1591 [2] BOLT  
7. 1D-4717 [4] NUT  
8. 7P-9789 [1] LEVER  
9. 1B-8706 [3] KEY  
10. 1B-0676 [3] PIN  
11. 3B-4615 [3] COTTER PIN  
12. 1A-9252 [3] END  
13. 1B-4203 [7] NUT  
14. 8G-1312 [1] ROD  
15. 6V-1245 [1] ROD END  
16. 2D-2285 [1] BOLT  
17. 8G-8338 C [1] CLIP  
18. 8G-4257 C [1] LEVER  
19. 8G-3525 [1] LEVER  
20. 8G-1029 [1] ROLLER  
  8M-5346 [1] SUPPORT  
  3D-8823 [1] BEARING  
21. 0S-1587 [1] BOLT  
  1K-6872 [1] LOCKNUT  
22. 7P-3439 [1] LEVER  
23. 7P-8633 [1] SHAFT  
24. 6D-3787 [2] BEARING  
25. 7P-8693 [1] TUBE ASSEM.  
26. 010-2461 [1] SETSCREW  
27. 4B-4283 [2] WASHER  
28. 0S-1594 [2] BOLT  
29. 5P-1075 [4] WASHER  
30. 7P-3416 [1] GUARD  
31. 7J-8744 [1] WASHER  
32. 7P-8847 [1] ROD  
33. 7P-3420 [1] SHAFT  
34. 0L-1352 [2] BOLT  
35. 7P-3417 [1] SPACER  
36. 7P-8848 [1] BLOCK  
37. 6F-3890 [1] SPACER  
  C   INDICATES CHANGE
 

#XMBP96960628
 

7P-7016: POSITIONER & KICKOUT GP

POSITIONER AND KICKOUT (7P7016 N/S) - Part 2 of 2
Effective with Serial No. 78Y807~78Y827 & 44Z317~44Z339
j23855e XMBP9696
7P7016 POSITIONER & KICKOUT GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [2] BOLT  
2. 1F-4449 C [1] SPRING  
3. 7P-8844 [1] COVER  
4. 0L-1351 [5] BOLT  
5. 5P-1075 [6] WASHER  
6. 1D-4642 [2] BOLT  
  5P-8250 [2] WASHER  
7. 7P-8845 [1] BAR ASSEM.  
8. 2B-0860 [1] NUT  
9. 7P-8683 [1] ROD ASSEM.  
10. 1D-5119 [1] NUT  
11. 7P-8685 [1] LEVER ASSEM.  
  1K-4675 [1] BUSHING  
12. 1D-4610 [1] BOLT  
13. 6K-8716 [5] WASHER  
14. 7P-8687 [1] SHAFT  
15. 4J-8820 [2] SPACER  
16. 9L-9132 [1] WASHER  
17. 7P-1810 [1] BEARING ASSEM.  
18. 7P-8676 [1] SUPPORT ASSEM.  
19. 7P-8672 [1] PLATE  
20. 0S-1619 [1] BOLT  
  2K-4973 [1] LOCKNUT  
  8M-7145 [1] WASHER  
21. 5M-2894 [1] WASHER  
22. 7P-8688 [1] PLATE  
23. 7P-8838 [1] BRACKET ASSEM.  
24. 9F-2978 [5] NUT  
25. 7P-8678 [1] PLATE  
26. 3J-5397 [1] ROLLER  
27. 4D-6432 [1] LOCKNUT  
  5P-8244 [1] WASHER  
28. 7P-3414 [1] LEVER  
29. 0S-1571 [1] BOLT  
  0L-1319 [1] WASHER  
30. 7P-3415 [1] SHAFT  
31. 6D-3787 [1] BEARING  
  C   INDICATES CHANGE
 

#XMBP96960629
 

7P-7016: POSITIONER & KICKOUT GP

POSITIONER AND KICKOUT (7P7016 N/S) - Part 1 of 2
Effective with Serial No. 78Y828~78Y864 & 44Z340~44Z353
j24182e XMBP9696
7P7016 POSITIONER & KICKOUT GP Parts scheme
  For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3Y-7920 [1] PLATE  
2. 0L-1351 [2] BOLT  
3. 5M-2894 [4] WASHER  
4. 7P-4723 [1] LEVER ASSEM.  
5. 5P-5015 [4] BEARING  
6. 0S-1591 [2] BOLT  
7. 1D-4717 [5] NUT  
8. 7P-9789 [1] LEVER  
9. 1B-8706 [3] KEY  
10. 1B-0676 [3] PIN  
11. 3B-4615 [3] COTTER PIN  
12. 1A-9252 [3] END  
13. 1B-4203 [5] NUT  
14. 8G-1312 [1] ROD  
15. 4D-4064 C [1] ROD END  
16. 2D-2285 [1] BOLT  
17. 8G-8338 [1] CLIP  
18. 8G-4257 [1] LEVER  
19. 8G-3525 [1] LEVER  
20. 8G-1029 [1] ROLLER  
  8M-5346 [1] SUPPORT  
  3D-8823 [1] BEARING  
21. 0S-1587 [1] BOLT  
  1K-6872 [1] LOCKNUT  
22. 7P-3439 [1] LEVER  
23. 7P-8633 [1] SHAFT  
24. 6D-5974 C [2] BEARING  
25. 7P-8693 [1] TUBE ASSEM.  
26. 010-2461 [1] SETSCREW  
27. 4B-4283 [2] WASHER  
28. 0S-1594 [2] BOLT  
29. 5P-1075 [2] WASHER  
30. 0L-1143 C [1] BOLT  
31. 7J-8744 [1] WASHER  
32. 7P-8847 [1] ROD  
33. 7P-3420 [1] SHAFT  
34. 0S-1619 C [1] BOLT  
35. 0L-1319 C [1] WASHER  
36. 0L-0478 C [1] BOLT  
37. 6F-3890 [1] SPACER  
38. 6B-0933 C [1] SPACER  
39. 2H-0705 C [1] SPACER  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Relief Valves For Attachment Cylinder And Head End Of Tilt Cylinder<BR> (9J458)
943 & 953 TRACK-TYPE LOADERS
Relief Valve For Rod End Of Tilt Cylinder<BR> (9J459)
943 & 953 TRACK-TYPE LOADERS
Relief Valve For Head End Of Lift Cylinder<BR> (3G9804)
943 & 953 TRACK-TYPE LOADERS
943 Lift Cylinders<BR> (9J532)
943 & 953 TRACK-TYPE LOADERS
943 Tilt Cylinder<BR> (3G4653 &amp; 1U4802)
943 & 953 TRACK-TYPE LOADERS
953 Lift Cylinders<BR> (3G717)
943 & 953 TRACK-TYPE LOADERS
953 Tilt Cylinder<BR> (1U418)
943 & 953 TRACK-TYPE LOADERS
Multi-Purpose Bucket Cylinders<BR> (9J4892)
943 & 953 TRACK-TYPE LOADERS
Ripper Cylinders<BR> (3G1296)
943 & 953 TRACK-TYPE LOADERS
Ripper Cylinder Mounting Group
943 & 953 TRACK-TYPE LOADERS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Lift Cylinders
943-953 TRACK-TYPE LOADERS VEHICLE SYSTEMS
Tilt Cylinder
943-953 TRACK-TYPE LOADERS VEHICLE SYSTEMS
Service Magazine
Orifice/Choke Added To Tilt Cylinder Lines For Better Bucket Control{5057}
1982/03/15
New Lift Cylinders Used{5102}
1983/02/28
Improved Seals And Rings Used In Lift Cylinder Pistons {5102}
1984/01/16
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
Tilt Cylinder Lines Group Uses A New Elbow And Longer Hose And Tube Assemblies{5057}
1985/03/11
New Piston Seal For 139.7 mm (5.50&quot;) Hydraulic Cylinders{5456,5457,5104,5458}
1985/05/13
New Relief Valve And Baffle Used In Lift Cylinder Hydraulic Circuit{5117,5102}
1985/08/12
New Hydraulic Piston Seals Used; Recommended Installation Procedures{7555,7562,5456,5457,5458}
1986/10/13
Hydraulic Cylinder Noise {5100,5102}
1986/12/01
Improved Seal More Tolerant Of Pressure Fluctuation or Part Clearance Expansion{5104}
1995/10/30
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 953 :

CYLINDER GP
4T-2098 CYLINDER GP
CYLINDER GP-LIFT
4T-0263 CYLINDER GP-LIFT
CYLINDER GP-LIFT
3G-0717 CYLINDER GP-LIFT
LINES GP-RIPPER
1U-4454 LINES GP-RIPPER
LINES GP
6W-2653 LINES GP
LINES GP
6W-2653 LINES GP
LINES GP-BUCKET
8V-7369 LINES GP-BUCKET
LINES GP-HYDRAULIC
3V-6224 LINES GP-HYDRAULIC
CYLINDER GP-TILT
1U-0418 CYLINDER GP-TILT
CYLINDER GP-BUCKET
9J-4892 CYLINDER GP-BUCKET
CYLINDER GP-SIDE DUMP
9T-0107 CYLINDER GP-SIDE DUMP
CYLINDER GP
3G-1296 CYLINDER GP
POSITIONER & KICKOUT GP
7P-7016 POSITIONER & KICKOUT GP
POSITIONER & KICKOUT GP
7P-7016 POSITIONER & KICKOUT GP
POSITIONER & KICKOUT GP
7P-7016 POSITIONER & KICKOUT GP
POSITIONER & KICKOUT GP
7P-7016 POSITIONER & KICKOUT GP

Truck sale:

Caterpillar 953K, track loaders, Construction
190,000 
Caterpillar 953K, track loaders, Construction
- track loaders
CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar 953K, track loaders, Construction
285,000 
Caterpillar 953K, track loaders, Construction
- track loaders
FOLEY EQUIPMENT COMPANY
Caterpillar 953K, track loaders, Construction
265,000 
Caterpillar 953K, track loaders, Construction
- track loaders
FABICK CAT
 
344,000 
Caterpillar 953, track loaders, Construction
- track loaders
WHEELER MACHINERY CO.
Caterpillar 953K, track loaders, Construction
268,000 
Caterpillar 953K, track loaders, Construction
- track loaders
CLEVELAND BROTHERS EQUIPMENT COMPANY INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.