ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
CYLINDER BLOCK GPSUPPRESSION GP-SOUND
CRANKSHAFT GP
ENGINE ARRANGEMENT
ENGINE AR#XMBP97970001
1W-2630: ENGINE AR
1W2630 ENGINE ARRANGEMENT -- Basic -- Part 1 of 2
Effective with Serial No. 10Z8765-UP
Effective with Serial No. 10Z8765-UP
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8N-5286 RY | [1] | CYLINDER BLOCK GROUP | ||
| 7N-1342 Y | [1] | CYLINDER BLOCK COVER GROUP | ||
| 6N-8079 Y | [1] | CRANKSHAFT GROUP | ||
| 2P-6224 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| - OR - | ||||
| 2P-6226 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| 1W-6588 Y | [6] | CONNECTING ROD & PISTON GROUP | ||
| 1N-4406 Y | [1] | CAMSHAFT GROUP | ||
| 7N-8876 RY | [1] | CYLINDER HEAD GROUP | ||
| 7N-9536 Y | [1] | CYLINDER HEAD FASTENER GROUP | ||
| 7N-8026 Y | [1] | VALVE MECHANISM GROUP | ||
| 8N-4745 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 6N-8326 Y | [1] | ENGINE LIFTING GROUP | ||
| 8N-0303 Y | [1] | FRONT HOUSING GROUP | ||
| 8N-0872 Y | [1] | FRONT HOUSING FASTENER GROUP | ||
| 1W-5634 Y | [1] | FRONT TIMING GEAR GROUP | ||
| 1W-7831 Y | [1] | DAMPER GROUP | ||
| 8N-4422 Y | [1] | ENGINE SUPPORT GROUP | ||
| 2W-6683 Y | [1] | CRANKSHAFT PULLEY GROUP | ||
| 2P-6528 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 8N-0107 Y | [1] | ENGINE TRUNNION GROUP | ||
| 1W-1154 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 7N-2729 Y | [1] | FLYWHEEL GROUP | ||
| 1W-5034 Y | [1] | REAR GEAR GROUP | ||
| 2P-6152 Y | [1] | OIL PAN GROUP | ||
| 2P-6200 Y | [1] | OIL PAN FASTENER GROUP | ||
| 4W-4269 Y | [1] | OIL LEVEL GAGE GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#XMBP97970002
1W-2630: ENGINE AR
1W2630 ENGINE ARRANGEMENT -- Basic -- Part 2 of 2
Effective with Serial No. 10Z8765-UP
Effective with Serial No. 10Z8765-UP
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2P-1784 Y | [1] | ENGINE OIL PUMP GROUP | ||
| 2P-6105 Y | [1] | ENGINE OIL LINES GROUP | ||
| 1P-4244 Y | [1] | BREATHER GROUP | ||
| 4W-4270 Y | [1] | OIL FILLER GROUP | ||
| 7N-5909 Y | [1] | WATER PUMP GROUP | ||
| 2W-6779 Y | [1] | WATER LINES GROUP | ||
| 2W-2272 Y | [1] | FILTER BASE & ENGINE OIL COOLER GROUP | ||
| 7N-2731 Y | [1] | TRANSMISSION OIL COOLER GROUP | ||
| 8N-3726 Y | [1] | AIR LINES GROUP | ||
| 6N-0164 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 8N-2669 Y | [1] | TURBOCHARGER GROUP | ||
| - OR - | ||||
| 7C-8657 Y | [1] | TURBOCHARGER GROUP | ||
| 8N-1501 Y | [1] | TURBOCHARGER OIL LINES GROUP | ||
| - OR - | ||||
| 9Y-5727 Y | [1] | TURBOCHARGER OIL LINES GROUP | ||
| 1W-4486 Y | [1] | EXHAUST MANIFOLD FASTENER GROUP | ||
| 7W-3489 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| - OR - | ||||
| 7C-9602 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| 1W-3609 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 7W-5156 Y | [1] | SECONDARY FILTER GROUP | ||
| 1W-1690 Y | [1] | PRIMARY FUEL FILTER GROUP | ||
| 2W-1605 Y | [1] | DRAIN LINES GROUP | ||
| 2W-4160 Y | [1] | FUEL TRANSFER PUMP & MOUNTING GROUP | ||
| Y | SEPARATE ILLUSTRATION | |||
#XMBP97970003
8N-5286: CYLINDER BLOCK GP
CYLINDER BLOCK (8N5286 N/S)
Effective with Serial No. 10Z8765-UP
1N3576 Cylinder Block parts are shown on Page 11
Effective with Serial No. 10Z8765-UP
1N3576 Cylinder Block parts are shown on Page 11
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-6134 | [6] | BAND | |
| 2. | 3S-5496 | [1] | SEAL | |
| 3. | 4B-5387 | [1] | PLUG | |
| 4. | 5M-6214 | [1] | PLUG | |
| 5. | 7N-7998 | [1] | PLATE | |
| 6. | 7W-7546 | [1] | GASKET | |
| 7. | 1N-3576 Y | [1] | BLOCK GROUP | |
| 8. | 7H-3171 | [1] | PLUG | |
| 9. | 5M-6213 | [4] | PLUG | |
| 10. | 2B-0858 | [2] | PLUG | |
| 11. | 8M-9307 | [1] | PLUG | |
| 6F-7062 | [1] | WASHER | ||
| 12. | 2P-8889 | [6] | LINER | |
| 13. | 5S-6670 | [18] | SEAL | |
| Y | SEPARATE ILLUSTRATION | |||
#XMBP97970004
1N-3576: CYLINDER BLOCK GP
1N3576 CYLINDER BLOCK GROUP
Effective with Serial No. 10Z8765-UP
Part of Cylinder Block
Effective with Serial No. 10Z8765-UP
Part of Cylinder Block
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-6019 | [1] | PLUG | |
| 2. | 8K-1207 | [2] | DOWEL | |
| 3. | 5B-7652 | [2] | DOWEL | |
| 4. | 1S-9540 | [1] | DOWEL | |
| 5. | 4B-5387 | [1] | PLUG | |
| 6. | 8B-6349 | [2] | DOWEL | |
| 7. | 5S-8462 | [1] | STUD | |
| 8. | 8N-4110 | [1] | BEARING | |
| 9. | 4B-3938 | [1] | PLUG | |
| 10. | 4B-9782 | [1] | BALL | |
| 11. | 1P-2717 | [7] | CAP | |
| 12. | 7S-3224 | [14] | BOLT | |
| 2S-5658 | [14] | WASHER | ||
| 13. | 7M-4046 | [4] | BEARING | |
| The Following Kit Is Available: | ||||
| 6N-7727 | [1] | KIT (CYLINDER BLOCK HARDWARE) | ||
| (Includes Orifice, Plug, Dowel, Sleeve) | ||||
#XMBP97970005
7N-1342: COVER GP-CYLINDER BLOCK
CYLINDER BLOCK COVER (7N1342 N/S)
Effective with Serial No. 10Z8765-UP
Effective with Serial No. 10Z8765-UP
#XMBP97970006
1W-7670: PANEL GP-SOUND SUPPRESSION
SOUND SUPPRESSION PANEL (1W7670 N/S)
Part of 3W5167, 3W5168 and 3W5169 Sound Suppression
Arrangements listed on Pages 384 and 385
AN ATTACHMENT
Part of 3W5167, 3W5168 and 3W5169 Sound Suppression
Arrangements listed on Pages 384 and 385
AN ATTACHMENT
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-7684 | [1] | PANEL ASSEM. | |
| 2. | 8K-1115 | [6] | BUMPER | |
| 3. | 1W-7683 | [1] | PANEL ASSEM. | |
| 4. | 1W-7672 | [1] | PANEL ASSEM. | |
| 5. | 8K-1115 | [1] | BUMPER | |
| 6. | 1W-7671 | [1] | PANEL ASSEM. | |
| 8K-1115 | [5] | BUMPER | ||
| 7. | 4N-9915 | [23] | GROMMET ASSEM. | |
| 9N-0869 | [23] | WASHER | ||
| 8. | 4B-3388 | [22] | BOLT | |
| 9. | 002-1626 | [1] | BOLT |
#XMBP97970007
6N-8079: CRANKSHAFT GP
CRANKSHAFT (6N8079 N/S)
Effective with Serial No. 10Z8765-UP
Effective with Serial No. 10Z8765-UP
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-9342 | [2] | PLATE | |
| 2. | 4W-5738 | [7] | BEARING | |
| 8N-8225 J | [7] | BEARING (0.25mm UNDERSIZE) | ||
| 8N-8226 J | [7] | BEARING (0.51mm UNDERSIZE) | ||
| 8N-8227 J | [7] | BEARING (0.76mm UNDERSIZE) | ||
| 3. | 2W-7458 R | [1] | CRANKSHAFT ASSEM. | |
| 4. | 9F-2247 | [6] | PLUG | |
| 5. | 5H-2671 | [1] | KEY | |
| 6. | 1W-4405 | [1] | GEAR (40 TEETH) | |
| 7. | 2P-3859 | [1] | SLEEVE | |
| J | NOT PART OF CRANKSHAFT 6N8079 | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#XMBP97970008
2P-6224: SEAL GP-CRANKSHAFT
CRANKSHAFT SEAL (2P6224 N/S)
Effective with Serial No. 10Z8765~10Z14462
Effective with Serial No. 10Z8765~10Z14462
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SIS#XMBP97970009
2P-6226: SEAL GP-CRANKSHAFT
CRANKSHAFT SEAL (2P6226 N/S)
Effective with Serial No. 10Z14463-UP
Effective with Serial No. 10Z14463-UP
Parts for your D6H TRACK-TYPE TRACTOR:
CATERPILLAR SISInformation:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
Engine News
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Service Magazine
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08
2001/01/08
Caterpillar Parts SIS Catalog D6H :
Truck sale:
38,000



