AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G4768 GEAR PUMP GROUP Part of 8P3074, 8P3075, 8P3076 and 8P3077 Hydraulic Control Arrangements D6D TRACK-TYPE TRACTOR


HYDRAULIC SYSTEM
PUMP GP
LINES GP-BULLDOZER
LINES GP-CYLINDER
LINES GP-RIPPER
LINES GP-PUMP
LINES GP-RIPPER
CYLINDER GP

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 31X
 D6D TRACK-TYPE TRACTOR / POWERSHIFT / 31X03833-UP (MACHINE) POWERED BY 3306 ENGINE XMBP9826 D6D 31X   (1979)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-GEAR
3G-4768 PUMP GP-GEAR
 

#XMBP98260270
 

3G-4768: PUMP GP-GEAR

3G4768 GEAR PUMP GROUP
Part of 8P3074, 8P3075, 8P3076 and 8P3077 Hydraulic Control Arrangements
j31778e XMBP9826
3G4768 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-1253 [1] SHAFT  
2. 008-3214 [1] RING  
3. 9T-1268 [1] GEAR  
4. 9T-2839 [1] FLANGE ASSEM.  
5. 6J-2386 [2] DOWEL  
6. 9T-1291 [1] BODY ASSEM.  
7. 9T-1276 [2] PLATE (PRESSURE)  
8. 4T-9298 [4] BUSHING  
9. [1] PLATE (ISOLATION)  
10. 4T-9425 [1] PLATE (ISOLATION)  
11. 6V-1899 [2] SEAL  
12. 0S-1595 [8] BOLT  
13. 6J-2391 [8] WASHER  
    THE FOLLOWING REPAIR KIT ARE AVAILABLE:
  9T-1437 [1] PLUG KIT  
  9J-4729 [1] SEAL KIT  
 

#XMBP98260271
 

8P-3363: LINES GP-DOZER

8P3363 BULLDOZER LINES GROUP
Part of 8P3074, 8P3075, 8P3076 and 8P3077 Hydraulic Control Arrangements
j24396e XMBP9826
8P3363 LINES GP-DOZER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-1189 [1] BRACKET  
2. 1D-4610 [1] BOLT  
  5P-8248 C [1] WASHER  
3. 1D-4566 [2] BOLT  
4. 9S-1366 [1] BOLT  
5. 5P-8245 [2] WASHER  
6. 0L-1329 [1] BOLT  
7. 4J-0519 [2] SEAL  
8. 8P-3377 [1] TUBE ASSEM.  
9. 1A-2029 [2] BOLT  
10. 5M-2894 [18] WASHER  
11. 5P-1075 [8] WASHER  
12. 8M-7145 [2] WASHER  
13. 3P-4505 [1] BRACKET  
14. 3B-1915 [4] BOLT  
  1D-4717 [4] NUT  
15. 6P-5449 [1] PLATE  
16. 0L-2070 [1] BOLT  
17. 6P-5448 [1] SUPPORT ASSEM.  
18. 5F-4899 [2] BOLT  
19. 0S-1588 [16] BOLT  
20. 5P-1076 C [6] WASHER  
21. 3Y-8527 C [4] CLAMP  
22. 1A-5822 C [1] BOLT  
  1D-4719 C [1] NUT  
23. 1K-4649 C [1] SPACER  
24. 1P-4576 [8] FLANGE  
  C   INDICATES CHANGE
 

#XMBP98260272
 

9P-4336: LINES GP-BULLDOZER

9P4336 BULLDOZER LINES GROUP
Part of 3Y842 and 3Y843 Bulldozer Arrangements listed on Page 239
j14681e XMBP9826
9P4336 LINES GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [16] BOLT  
2. 4B-4278 [16] WASHER  
3. 0L-1143 [12] BOLT (63.5mm Long)  
4. 4J-8265 [16] NUT  
5. 0T-0573 [4] BOLT (69.8mm Long)  
6. 4J-0519 [4] SEAL  
7. 9P-4349 [1] TUBE ASSEM. (L.H.)  
8. 2P-7092 [2] PLATE  
9. 1P-4576 [8] FLANGE  
  4J-5267 [4] SEAL  
10. 9P-4348 [1] TUBE ASSEM. (L.H.)  
11. 6K-7396 [2] HOSE ASSEM.  
  5P-0180 H HOSE 73cm  
12. 3S-7166 [2] SLEEVE  
13. 3S-7165 [2] STEM ASSEM. (Straight)  
14. 8B-2133 [2] SPACER  
15. 1A-1460 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
16. 9P-4347 [1] TUBE ASSEM. (R.H.)  
17. 7S-3916 [2] CLIP (Tab)  
  7S-3919 [2] CLIP  
18. 9P-4350 [1] TUBE ASSEM. (R.H.)  
19. 1L-4684 [4] CLAMP  
20. 0S-1594 [2] BOLT  
  1D-4717 [2] NUT  
21. 8S-4413 [2] HOSE ASSEM.  
  5P-0180 H HOSE 73cm  
22. 3S-7166 [2] SLEEVE  
23. 5P-4122 [2] STEM ASSEM. (Straight)  
  H   ORDER BY THE CM
 

#XMBP98260273
 

9P-0477: LINES GP-TILT CYLINDER

9P477 TILT CYLINDER LINES GROUP
Part of 8P3075 and 8P3077 Hydraulic Control Arrangements
j29474e XMBP9826
9P0477 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-8753 C [1] ELBOW  
2. 4V-0616 C [2] HOSE ASSEM.  
  5P-0178 H HOSE 231cm  
3. 2P-0987 [1] COUPLING ASSEM.  
4. 4S-5414 [2] SLEEVE  
5. 8S-6417 [1] COUPLING ASSEM.  
6. 0S-1587 [1] BOLT  
7. 2B-7092 C [1] SPACER  
8. 5P-8245 C [5] WASHER  
9. 8S-4950 [2] CAP  
10. 7K-4129 [2] UNION  
11. 1J-7647 [1] CLAMP  
12. 1J-7468 [1] CLAMP  
13. 0S-1621 C [1] BOLT  
14. 5P-1075 C [4] WASHER  
15. 7G-3323 [1] BRACKET  
16. 0S-1594 C [2] BOLT  
17. 2B-0947 C [2] BOLT  
18. 1D-4717 [2] NUT  
19. 4J-0520 [1] SEAL  
20. 3R-2704 C [2] UNION  
21. 0L-1352 [1] BOLT  
22. 7S-1912 [3] CLIP  
23. 5M-2894 C [1] WASHER  
24. 030-8189 C [1] CONNECTOR  
  3D-2824 C [1] SEAL  
25. 030-7943 C [1] ELBOW  
  3K-0360 C [1] SEAL  
26. 1D-4719 C [1] NUT  
27. 8M-2530 [2] BOLT  
28. 6K-0806 [2] STRAP  
29. 5P-9298 C [1] CLIP  
  6V-7383 C [1] CLIP  
30. 6T-3662 C [1] TUBE ASSEM.  
31. 6T-3663 C [1] TUBE ASSEM.  
32. 6T-2710 C [1] BRACKET  
33. 3B-1915 C [1] BOLT  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETER
 

#XMBP98260274
 

2P-6053: LINES GP-TILT CYLINDER

2P6053 TILT CYLINDER LINES GROUP
Part of 8J3930 Tilt Cylinder Arrangement listed on Page 240
AN ATTACHMENT
j23638e XMBP9826
2P6053 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4576 [4] FLANGE  
2. 0S-1588 [8] BOLT  
  5M-2894 [8] WASHER  
3. 4J-5267 [2] SEAL  
4. 0S-1621 [2] BOLT  
5. 5P-8245 [6] WASHER  
6. 6H-3609 [2] BOSS  
7. 2P-8492 [1] GUARD  
8. 2P-7959 [2] HOSE ASSEM.  
  5P-0178 H HOSE 308cm  
9. 4S-5414 [2] SLEEVE  
10. 8S-6417 [2] COUPLING ASSEM.  
11. 005-4362 [2] ELBOW  
  3K-0360 [2] SEAL  
12. 2P-6588 [2] HEAD  
13. 0S-1595 [4] BOLT  
14. 6J-0333 [1] GUARD ASSEM.  
15. 3Y-5405 [2] RUBBER  
  H   ORDER BY THE CM
 

#XMBP98260275
 

8P-4398: LINES GP-RIPPER

RIPPER LINES (8P4398 N/S) -- Part 1 of 2
Part of 8P3076 and 8P3077 Hydraulic Control Arrangements
j32029e XMBP9826
8P4398 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8P-3297 [1] BRACKET ASSEM.  
2. 9F-2978 [2] NUT (WELD)  
3. 0S-1587 [2] BOLT  
4. 5P-8245 [7] WASHER  
5. 9G-9187 [1] TUBE ASSEM.  
6. 1D-4574 [3] BOLT  
7. 1D-4719 [3] NUT  
8. 7D-2746 [1] ELBOW  
  8L-6557 [1] CONNECTOR  
9. 8P-4955 [1] HOSE ASSEM.  
10. 9L-8868 [1] ELBOW  
  1J-9671 [1] SEAL  
11. 4J-0522 [1] SEAL  
12. 7G-5773 [1] TUBE ASSEM.  
13. 4J-0520 [2] SEAL  
14. 2B-0947 [2] BOLT  
15. 1P-4577 [4] FLANGE  
16. 0S-1571 [8] BOLT  
17. 5M-2894 C [10] WASHER  
18. 9G-9234 [1] HOSE ASSEM.  
  5P-0180 H HOSE 170cm  
19. 5S-5283 [1] STEM ASSEM.  
    (STRAIGHT)
20. 3S-7166 [2] SLEEVE  
21. 8S-4591 [1] STEM ASSEM. (60 degrees)  
22. 8S-0023 [1] CLIP  
  8S-0024 [1] CLIP  
23. 1A-2029 [2] BOLT  
24. 1D-4717 [4] NUT  
25. 6K-0806 [3] TIE  
26. 0S-0509 [1] BOLT  
27. 4S-4455 [1] CLIP  
28. 5P-1075 [6] WASHER  
29. 7K-9134 [1] STRIP  
30. 9S-3232 [2] CLIP  
31. 3T-8658 C [1] TUBE  
32. 3B-1915 [2] BOLT  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETER
 

#XMBP98260276
 

8P-4398: LINES GP-RIPPER

RIPPER LINES (8P4398 N/S) -- Part 2 of 2
Part of 8P3076 and 8P3077 Hydraulic Control Arrangements
j32030e XMBP9826
8P4398 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-3916 [2] CLIP (TAB)  
  7S-3919 [2] CLIP (SLOT)  
2. 0S-1594 [2] BOLT  
3. 5P-6412 H HOSE 10cm  
4. 5M-2894 [18] WASHER  
5. 0S-1571 [16] BOLT  
6. 1P-4576 [4] FLANGE  
7. 8P-8194 [1] TUBE ASSEM.  
8. 1P-4577 [4] FLANGE  
9. 4J-0520 [2] SEAL  
10. 8P-8198 [1] TUBE ASSEM.  
11. 8P-8196 [1] TUBE ASSEM.  
12. 0S-1587 [4] BOLT  
13. 5P-8245 [6] WASHER  
14. 3T-5958 [1] TUBE ASSEM.  
15. 5P-6412 HC HOSE 16cm  
16. 5P-2230 [4] CLAMP  
17. 0S-1585 [2] BOLT  
18. 1A-1460 [4] BOLT  
  1D-4719 [4] NUT  
  5P-1076 [8] WASHER  
19. 8P-8192 [1] TUBE ASSEM.  
20. 8P-4407 [1] BRACKET ASSEM.  
  9F-2978 [2] NUT (WELD)  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETER
 

#XMBP98260277
 

8P-4167: LINES GP-PUMP

8P4167 PUMP LINES GROUP
Part of 8P3074, 8P3075, 8P3076 and 8P3077
Hydraulic Control Arrangements
j31779e XMBP9826
8P4167 LINES GP-PUMP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4577 [2] FLANGE  
2. 5M-2894 [4] WASHER  
3. 2B-0947 [4] BOLT  
5. 5P-8245 [10] WASHER  
5. 4J-0520 [3] SEAL  
6. 9S-4183 [1] PLUG  
7. 4J-0526 [1] SEAL  
8. 0S-1587 [5] BOLT  
9. 8P-3194 [1] TUBE ASSEM.  
10. 5P-1292 H HOSE 18cm  
11. 5P-0597 [2] CLAMP  
12. 5F-3106 [1] SEAL  
13. 0S-1566 [2] BOLT  
  5P-8247 [2] WASHER  
14. 0L-1329 [1] BOLT  
15. 4J-0524 [1] SEAL  
16. 8P-3192 [1] TUBE ASSEM.  
17. 8P-3196 [1] HOSE ASSEM.  
  5P-0181 H HOSE 64cm  
18. 3S-7252 [2] SLEEVE  
19. 3S-8499 [1] STEM ASSEM. (45 degrees)  
20. 5S-3454 [1] STEM ASSEM. (67.5 degrees)  
21. 4J-0522 [1] SEAL  
22. 3H-5368 [4] BOLT  
23. 1P-4578 [2] FLANGE  
24. 0S-1588 [4] BOLT  
25. 3P-1288 [1] ELBOW  
26. 9S-4191 [2] PLUG  
  3J-1907 [2] SEAL  
27. 3D-2824 [1] SEAL  
28. 5P-8244 [4] WASHER  
  H   ORDER BY THE CENTIMETER
 

#XMBP98260278
 

8J-7050: LINES GP-RIPPER

8J7050 RIPPER LINES GROUP
Part of 8J7592 Ripper Arrangement listed on Page 248
j30445e XMBP9826
8J7050 LINES GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-7051 [2] HOSE ASSEM.  
  5P-0180 H HOSE 119cm  
2. 3S-8360 [1] STEM ASSEM. (45 degrees)  
3. 3S-7166 [2] SLEEVE  
4. 5S-6102 [1] STEM ASSEM. (90 degrees)  
5. 4J-5267 [2] SEAL  
6. 0S-1588 [8] BOLT  
  5M-2894 [8] WASHER  
7. 1P-4577 [4] FLANGE  
8. 4J-0520 [2] SEAL  
9. 0S-1594 [1] BOLT  
10. 1D-4717 [1] NUT  
11. 1L-4684 [2] CLAMP  
  H   ORDER BY THE CENTIMETER
 

#XMBP98260279
 

7J-8302: CYLINDER GP

7J8302 BULLDOZER LIFT CYLINDER GROUP
Part of 3Y842 and 3Y843 Bulldozer Arrangements listed on Page 239
j22843e XMBP9826
7J8302 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2007 [1] PISTON ASSEM.  
2. 9J-2010 [2] INSERAT  
3. 9J-2009 [1] PLUNGER  
4. 8J-9282 [2] SPACER  
5. 9J-2008 [1] PLUNGER  
6. 5J-5402 [1] SEAL ASSEM.  
7. 5P-1839 [1] BOLT  
  8J-4359 [1] WASHER  
8. 1M-1571 [1] RING  
9. 7J-8301 R [1] CYLINDER ASSEM.  
10. 4J-6374 [2] BEARING  
11. 8J-5912 [1] SET SCREW  
12. 7J-6461 [1] GROWN  
13. 7J-8294 R [1] ROD  
14. 3B-2968 [4] BOLT  
15. 5P-8248 [4] WASHER  
16. 3J-6559 [1] CAP  
17. 3J-6572 [12] SHIM  
18. 1K-6982 [1] SEAL  
19. 5J-0964 [1] SEAL  
20. 2K-6830 [1] RING  
21. 1H-8128 [1] SEAL  
22. 3Y-8949 [1] SEAL  
23. 7J-8295 [1] HEAD  
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog D6D :

VALVE GP-AUXILIARY
4J-0487 VALVE GP-AUXILIARY
VALVE GP-PITCH RELIEF
3G-8078 VALVE GP-PITCH RELIEF
VALVE GP-PITCH RELIEF
3G-8078 VALVE GP-PITCH RELIEF
VALVE GP
9T-0175 VALVE GP
VALVE GP
9T-0173 VALVE GP
VALVE GP-CONTROL
9T-0176 VALVE GP-CONTROL
VALVE GP-CONTROL
9T-0174 VALVE GP-CONTROL
9T-0492 TANK & VALVE GP-HYDRAULIC
LINES GP-DOZER
8P-3363 LINES GP-DOZER
LINES GP-BULLDOZER
9P-4336 LINES GP-BULLDOZER
LINES GP-TILT CYLINDER
9P-0477 LINES GP-TILT CYLINDER
LINES GP-TILT CYLINDER
2P-6053 LINES GP-TILT CYLINDER
LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
8P-4398 LINES GP-RIPPER
LINES GP-PUMP
8P-4167 LINES GP-PUMP
LINES GP-RIPPER
8J-7050 LINES GP-RIPPER

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.