YOKE 0968015 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life.
Illustration 1 g06115089
Attach a suitable lifting device to remove/install the exhaust elbow ().
Remove tube (1) and set aside.
Disconnect sensor (2).
Remove four bolts (3), shield (4) , and block with gasket (5).
Remove four bolts (6) and bracket (7).
Remove four bolts (8).
Illustration 2 g06115140
Remove hose (9), tubes (10) and (11), and shielding (12).
Illustration 3 g06115181
Remove shielding (14).
Remove nuts (15) and exhaust bypass (13).
Remove bolts (16) and plate (17).
Illustration 4 g06115244
Remove 6 bolts (18) and (20).
Remove four bolts (19).
Remove exhaust elbow (21).Installation Procedure
Inspect all gaskets for wear and damage. Obtain a new gasket, if necessary.
Install exhaust elbow (21) in the reverse order of removal.
Tighten 2 diagonal nuts (15) to a torque of 25 6 N m (18 4 lb ft). Tighten remaining nuts (15) to a torque of 25 6 N m (18 4 lb ft). Tighten all nuts to 47 9 N m (35 7lb ft).