1075610 YOKE-BRAKE Caterpillar parts
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG
Rating:
Alternative (cross code) number:
CA1075610
107-5610
1075610
CA1075610
107-5610
1075610
Weight: 37 pounds 16 kg.
LANDFILL COMPACTOR, WHEEL LOADER,
Related part:
1075610
YOKE-YM
3988334
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1075610 Yoke-Brake (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Fits equipment: EARTHMOVING COMPACTOR: 826G, 826G II, 826H, 825G, 825G II, 825H, 826K, 825K; ENGINE - MACHINE: 3406, 3406C, 3406E, C15; WHEEL DOZER: 824G, 824G II, 824K, 824H; WHEEL-TYPE LOADER: 980H, 980K, 980G, 980GII, 980K HLG. || Condition: NEW AFTERMARKET || Weight: 42.57 lbs || Dimensions: 11.47-12.12-14.08 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Fits equipment: EARTHMOVING COMPACTOR: 826G, 826G II, 826H, 825G, 825G II, 825H, 826K, 825K; ENGINE - MACHINE: 3406, 3406C, 3406E, C15; WHEEL DOZER: 824G, 824G II, 824K, 824H; WHEEL-TYPE LOADER: 980H, 980K, 980G, 980GII, 980K HLG. || Condition: NEW AFTERMARKET || Weight: 42.57 lbs || Dimensions: 11.47-12.12-14.08 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1075610 Yoke-Brake (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 42.57 lbs || Dimensions: 11.47-12.12-14.08 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 42.57 lbs || Dimensions: 11.47-12.12-14.08 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
1075610 Yoke-Brake (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 42.57 lbs || Dimensions: 11.47-12.12-14.08 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 42.57 lbs || Dimensions: 11.47-12.12-14.08 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Number on catalog scheme:
6
For full view, you need register
Compatible equipment models: 1075610:
Information:
3406 Direct Injection Engines6V7050 Lifter Spring Compression Group makes removal and installation of the fuel injection pump group easier. The new scroll-type fuel system has stronger cam follower (lifter) springs that make removal more difficult. To use the tooling, see the instructions that follow.6V7050 Lifter Spring Compressor Group
Adjustment Of 6V7050 Compressor Group
1 Before the compressor group is used for the first time, or if the compressor group has been disassembled, an adjustment must be made to the compressor group. 2 There must be a pump group next to the one being used for this adjustment or when a pump group is being removed or installed. It is used as a stud to hold the compressor group. If two pump groups are not next to each other, install two pump groups (without the lifter spring). Put the bracket of compressor group (1) over one of the pump bonnets. Put 4B1228 Screw (2) in the fuel line seat of the next bonnet, to make an alignment of compressor group (1). Install and tighten 5M7418 Nut (3). Be sure 6V7015 Clamp (4) is not fastened (locked) down. Adjust screw (2) in or out so that the top of the bracket just starts to move (see arrow) when clamp (4) is fastened (locked) down. Tighten 4B2046 Nut (5).Removal Of Pump Group
1 Remove fuel lines (1). It is necessary to remove the line on each side of the pump group being removed. Install 8S4613 Wrench (2) and loosen bushing (3), a small amount, for the pump group being removed. Put compressor group (4) in position and install 5M7418 Nut (5). Use the 4B1228 Screw to put the compressor group in alignment with the pump group. Tighten nut (5). Put 6V7015 Clamp (6) in the fastened (locked) position. 2 Loosen bushing (3) until it is out of the threads. Lift the O-ring seal from the threads with a 5P7414 Seal Pick.
Do not remove the O-ring seal with your fingers. If the clamp handle is released by accident, the sudden release of the spring force could cause injury.
3 Lift clamp (6) SLOWLY to release the pressure on the lifter spring. If the cam lobe is up, there will be a small remainder of spring force which will be released when nut (5) is removed. Remove nut (5), compressor group (4) and bushing (3). Be sure the fuel rack is in center position. Remove the O-ring and the pump group. Put identification
Adjustment Of 6V7050 Compressor Group
1 Before the compressor group is used for the first time, or if the compressor group has been disassembled, an adjustment must be made to the compressor group. 2 There must be a pump group next to the one being used for this adjustment or when a pump group is being removed or installed. It is used as a stud to hold the compressor group. If two pump groups are not next to each other, install two pump groups (without the lifter spring). Put the bracket of compressor group (1) over one of the pump bonnets. Put 4B1228 Screw (2) in the fuel line seat of the next bonnet, to make an alignment of compressor group (1). Install and tighten 5M7418 Nut (3). Be sure 6V7015 Clamp (4) is not fastened (locked) down. Adjust screw (2) in or out so that the top of the bracket just starts to move (see arrow) when clamp (4) is fastened (locked) down. Tighten 4B2046 Nut (5).Removal Of Pump Group
1 Remove fuel lines (1). It is necessary to remove the line on each side of the pump group being removed. Install 8S4613 Wrench (2) and loosen bushing (3), a small amount, for the pump group being removed. Put compressor group (4) in position and install 5M7418 Nut (5). Use the 4B1228 Screw to put the compressor group in alignment with the pump group. Tighten nut (5). Put 6V7015 Clamp (6) in the fastened (locked) position. 2 Loosen bushing (3) until it is out of the threads. Lift the O-ring seal from the threads with a 5P7414 Seal Pick.
Do not remove the O-ring seal with your fingers. If the clamp handle is released by accident, the sudden release of the spring force could cause injury.
3 Lift clamp (6) SLOWLY to release the pressure on the lifter spring. If the cam lobe is up, there will be a small remainder of spring force which will be released when nut (5) is removed. Remove nut (5), compressor group (4) and bushing (3). Be sure the fuel rack is in center position. Remove the O-ring and the pump group. Put identification
Caterpillar parts catalog:
Parts yoke Caterpillar catalog:
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M
980G
980G
824G, 825G, 826G, 980G
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, AD30, R1700G
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, PM-465
2334658
YOKE
824G II, 824H
824G II, 824H
2965363
YOKE
824G, 824G II, 824H, 826G, 826G II, 826H, 844, 844H, 844K, D9R, D9T
824G, 824G II, 824H, 826G, 826G II, 826H, 844, 844H, 844K, D9R, D9T
3586189
YOKE AS
824K, 825K, 826K, D7E, D7E LGP
824K, 825K, 826K, D7E, D7E LGP
6Y2652
YOKE
824G, D10N
824G, D10N
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, AD30, R1700G
824G, 825G, 826G, 980G
980G
980G
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M
834G, 834H, 834K, 836G, 836H, 836K, 986H, 988G, 988H, 988K, AD45B, AD55, AD55B, AD60
834G, 834H, 836G, 836H, 988G, 988H
966G, 966G II, 966H, 966K, 966M, 966M XE, 972G, 972G II, 972H, 972K, 972M, 972M XE
8E4615
YOKE AS
834B, 988F II
834B, 988F II
9U0346
YOKE
988F II
988F II
824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 826G II, 826H, 826K, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 986H, PM-465