YOKE 1P9282 - Caterpillar

Monitor Panel (5) - If the indicator light comes on, a problem may exist in the monitor panel. The problem might also exist in the data communication lines. Consult your Caterpillar dealer for the necessary repairs. The machine can be operated, but the electronic monitor panel will not function. Perform any necessary repairs as soon as possible.Note: If electronic controller (4) and monitor panel (5) come on at the same time, there is a malfunction. This malfunction is in the communication between the electronic controller and the monitor panel. In this case, consult your Caterpillar dealer for any necessary repairs.
Coolant Level (6) - If this indicator is activated, the coolant level is below the specified level. Add coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant Level - Check". Note: When the prestart monitoring function is activated, the coolant level is checked. Refer to "Prestart Monitoring Function" for further information on the prestart monitoring function.
Engine Oil Level (7) - If this indicator is activated, the engine oil level is below the specified level. Add engine oil. Refer to Operation and Maintenance Manual, "Engine Oil Level - Check". Note: When the prestart monitoring function is activated, the engine oil level is checked. Refer to "Prestart Monitoring Function" for further information on the prestart monitoring function.
Hydraulic Oil Level (8) - If this indicator is activated, the hydraulic oil level is below the specified level. Add hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check". Note: When the prestart monitoring function is activated, the hydraulic oil level is checked. Refer to "Prestart Monitoring Function" for further information on the prestart monitoring function.Note: In order to check levels (6), (7) and (8), park on a level surface, and check the levels at least 30 minutes after the engine has been stopped.
Fuel Level (9) - If the fuel in the tank is below the specified level, this indicator will come on. Add fuel.
Air Inlet Heater (10) (If Equipped) - If the engine coolant temperature is too low, the air inlet heater will be activated. The indicator will come on when the engine starter is turned on. The engine can be started after the indicator goes off. Refer to Operation and Maintenance Manual, "Air Inlet Heater Starting Aid" for more information on the operation of the air inlet heater.
Low Transmission Pressure (11) - This alert indicator will come on when low transmission pressure is detected. The parking brake is applied automatically. Stop the machine immediately. Investigate the cause. Do not operate the machine until the cause has been corrected.
Transmission Problem (12) - This alert indicator will come on if the transmission filter is restricted. This alert indicator will come on if the command pressure for the transmission is low. This alert indicator will come on if the oil sump temperature of the transmission is high. Examine the condition of each component. Perform additional repairs, if necessary. Warning Category 2
In this category, the alert indicator and the action light