YOKE AS 2718521 - Caterpillar

(1) Support assembly. Both cap and block of each support assembly are machined at the same time as a set. Do not exchange either half with a half of another support assembly.(2) The block and cap of the support assembly must be assembled together with the letter "A" on the same side as shown.(3) Beam assembly.(4) Distance from end of dowel to beam assembly ... 13.00 0.51 mm (.512 .020 in)(5) Torque for two bolts ... 875 100 N m (640 80 lb ft)(6) Distance from end of dowel to bottom of block ... 24.99 0.51 mm (.984 .020 in)(7) Torque for seven bolts ... 360 50 N m (265 35 lb ft)