YOKE A.-PULLER 2B4206 - Caterpillar

1. Remove three retainer pins (1), three pins (2) and clevis (3) and (4). 2. Loosen set screws (5), unhook springs (6) and (7) at the bottom, but leave in place. Remove clip (8) and remove lever (9). 3. Position pedals (10), (11) and collars (12) to expose key (13). Remove key (13) and spring (6). 4. Position pedals and collars again to expose key (14). Remove key (14) from shaft (15). Slide shaft (15) out to remove collars (12) and pedal (11). 5. Position pedal (10) as illustrated. Remove cotter pin and pin (16) from the inching valve clevis. Remove pedal (10) and spring. 6. Remove two nuts (17), remove bracket (18) and shaft (15). 7. Remove two clips (19) from both ends of shaft (24). Remove washers and remove levers (20) and (22). Remove keys (21) and (23) from shaft (24), then remove shaft (24). Inspect bushings, keys, key slots, pins and shaft for wear. Replace worn or damaged parts. Install in the reverse order.