YOKE END 2K5886 - Caterpillar

2K5886 YOKE END Caterpillar parts 583H, 955L

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2K5886
2K-5886
2K5886

Weight: 0.20 pounds 0 kg.

Information:

HOLE DIAMETER 12.687 mm

LENGTH TO CENTERLINE OF HOLE 57.15 mm

THREAD LENGTH 0000028.5750 mm

THREAD SIZE .38-24

TYPE OFFSET

EXTERNAL YOKE WIDTH 28.575

INTERNAL YOKE WIDTH 14.287

Buy YOKE END 2K5886 Caterpillar genuine, new aftermarket tractor parts with delivery
PIPELAYER, TRACK LOADER,

Compatible equipment models: 2K5886:

PIPELAYER 583H

TRACK LOADER 955L Caterpillar

Number on catalog scheme: None

Caterpillar 2K5886 Parts scheme YOKE END

For full view, you need register

Information:

Removal Procedure
Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Put identification marks on each of the rocker arms and push rods in order to identify the proper location for installation.
Illustration 1 g06115616
Disconnect harness assemblies (4). Note: Failure to hold stud bolt (2) stationary during the removal of nut (1) could result in damage to the harness assembly (3).
Hold stud bolts (2) with a wrench in order to keep the stud bolts from rotating. Remove nuts (1). Position harness assembly (3) out of the way.
Illustration 2 g06115502
Loosen nuts (6) and loosen rocker arm adjustment screws (5).
Remove bolts (8) and remove stud bolts (2). Remove the rocker arm shaft assembly.
Remove pushrods (7).