YOKE 3111394 - Caterpillar

Table 1
APPROXIMATE REFILL CAPACITIES FOR THE TH580B    
Compartment or System    Liter    US gal    Imp gal    
Cooling System (Total Capacity without Heater)
12 kW gold cooler     22.5     5.9     5.0    
Cooling System (Total Capacity with Heater)
12 kW gold cooler     23.5     6.2     5.2    
Cooling System (Total Capacity without Heater)
20 kW black cooler     23.5     6.2     5.2    
Cooling System (Total Capacity with Heater)
20 kW black cooler     24.5     6.5     5.4    
Fuel Tank (Tank Capacity)     110     29     24.2    
Total Engine (Oil Capacity)
74.5 kW (99 hp) engine     Max level
8.4
Min level
7.1     Max level
2.2
Min level
1.9     Max level
1.8
Min level
1.6    
Total Engine (Oil Capacity)
92 kW (123 hp) engine     Max level
8.5
Min level
6.8     Max level
2.2
Min level
1.8     Max level
1.9
Min level
1.5    
Front Axle Differential (1)     14.5     3.8     3.2    
Rear Axle Differential     14.5     3.8     3.2    
Final Drive Hubs (Each Hub)     1.7     .44     0.37    
Hydraulic System (Including the Hydraulic Oil Tank and the Transmission)     105.3     27.8     23.2    
Washer Fluid Bottle     5     1.3     1.1    
( 1 ) Quantities exclude 0.4 L (0.11 US gal) of 197-0017 Friction Modifier (Axle and Brake) .Grease Points Identification
Illustration 1 g01211917
Typical exampleOn machines that are equipped with the Open Roll Over Protective Structure (OROPS), the identification film is located in the engine compartment to the back plate of the enclosure group. On machines that are equipped with the Enclosed Roll Over Protective Structure (EROPS), the identification film is located on the inside of the lower door.The identification film shows the lubrication points on the machine that need to be serviced and the maintenance intervals between each of the checks.Note: Refer to Operation and Maintenance Manual, "Maintenance Interval Schedule" for the recommended intervals.