YOKE AS 3888448 - Caterpillar

All electronic equipment is static-sensitive, some components more than others. To protect these components from static damage, you must take special precautions to minimize or eliminate electrostatic discharges.Follow these precautions when working with or near the control.1. Before doing maintenance on the electronic control, discharge the static electricity on your body to ground by touching and holding a grounded metal object (pipes, cabinets, equipment, etc.).2. Avoid the build-up of static electricity on your body by not wearing clothing made of synthetic materials. Wear cotton or cotton-blend materials as much as possible because these do not store static electric charges as much as synthetics.3. Keep plastic, vinyl, and styrofoam materials (such as plastic or styrofoam cups, cup holders, cigarette packages, cellophane wrappers, vinyl books or folders, plastic bottles, and plastic ash trays) away from the control, the modules, and the work area as much as possible.4. Do not remove the printed circuit board from the control cabinet unless absolutely necessary. If you must remove the printed circuit board from the control cabinet, follow these precautions: * Do not touch any part of the printed circuit board except the edges.* Do not touch the electrical conductors, the connectors, or the components with conductive devices or with your hands.* When replacing a printed circuit board, keep the new board in the plastic antistatic protective bag it comes in until you are ready to install it. Immediately after removing the old board from the control cabinet, place it in the antistatic protective bag.