4337135 YOKE Caterpillar parts
Rating:
Alternative (cross code) number:
CA4337135
433-7135
4337135
CA4337135
433-7135
4337135
Weight: 3 pounds 1 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$401.16
17 Aug 2021
Amazon.com
Mahr Federal 4337135 1086 Ri Reference Wireless or Wired Digital Indicator, 1.0" (50 mm) Range, 0.0005" (0.01 mm) Resolution, 8 mm Stem, Black
Mahr Federal MarCator. The New Generation Digital Indicators with Integrated Wireless and The Reference-System. Use with MarCom and i-stick for the most cost effective data collection measuring system || With Integrated Wireless Data acquisition with digital indicators is now even simpler: Simply transmit your measured data without cables directly into Microsoft Office Excel or other Windows programs || MarCator Digital Indicators are equipped with the innovative Reference-System. The zero position just has to be set once and remains stored for all further measurements || Functions include: ON/OFF, RESET, mm/inch, Reverse direction, PRESET, TOL (Enter tolerance limit values), ABS, <0> (Tolerance GO / NO GO display mode, DATA send, Factor
Mahr Federal MarCator. The New Generation Digital Indicators with Integrated Wireless and The Reference-System. Use with MarCom and i-stick for the most cost effective data collection measuring system || With Integrated Wireless Data acquisition with digital indicators is now even simpler: Simply transmit your measured data without cables directly into Microsoft Office Excel or other Windows programs || MarCator Digital Indicators are equipped with the innovative Reference-System. The zero position just has to be set once and remains stored for all further measurements || Functions include: ON/OFF, RESET, mm/inch, Reverse direction, PRESET, TOL (Enter tolerance limit values), ABS, <0> (Tolerance GO / NO GO display mode, DATA send, Factor
Number on catalog scheme:
1
For full view, you need register
Information:
Introduction
Do not perform any procedure in this special instruction until you have read this information and you understand this information.Required Parts
This special instruction requires the use of the 361-3923 Combustion Head Kit . The kit contains two 296-7780 Gaskets and a 353-9958 Combustion Head As Procedure
Illustration 1 g02174529
ARD combustion head (1) Spark plug (2) Wire for the heated nozzle (3) Flame detection temperature sensor
Remove spark plug (1) from the old ARD combustion head.
Remove flame detection temperature sensor (3) .
Remove wire for the heated nozzle (2) from the old head.
Remove the ARD combustion head. Refer to the Disassembly and Assembly Manual, "Combustion Head Group (ARD) – Remove and Install (Clean Emissions Module)".
Illustration 2 g02173966
(4) Gaskets (5) Studs
Remove gaskets (4).
Install new gaskets (4) .
Apply 4C-5597 Anti-Seize Compound to the threads of studs (5).
Install the ARD combustion head. Refer to the Disassembly and Assembly Manual, "Combustion Head Group (ARD) – Remove and Install (Clean Emissions Module)".
Apply 4C-5597 Anti-Seize Compound to nuts (6). Tighten the nuts in a crisscross pattern to a torque of 23 3 N m (17 2 lb ft). Tighten nuts (6) again in a crisscross pattern to a torque of 28 3 N m (21 2 lb ft). Tighten nuts (6) again in a crisscross pattern to a torque of 28 3 N m (21 2 lb ft).
Illustration 3 g02174916
(7) Gasket for the ARD combustion air
Install a new gasket for the ARD combustion air (7) .
Install the spark plug (1) from the old combustion head into the new combustion head. Torque the spark plug to 47 4 N m (35 3 lb ft).
Install flame detection temperature sensor (3) into the new combustion head. Torque the temperature sensor to 45 5 N m (33 4 lb ft).
Install wire for the heated nozzle (2) into the new combustion head with the hardware from the old combustion head.
Illustration 4 g02175353
Typical example (8) Pilot fuel fitting (9) Main fuel fitting (10) Fittings for the coolant
Install the ARD coolant lines on fittings for the coolant (10). Tighten the lines to a torque of 16 2 N m (12 1.5 lb ft).
Install the ARD pilot fuel line onto pilot fuel fitting (8). Tighten the line to a torque of 20 N m (15 lb ft).
Install the ARD main fuel line onto main fuel fitting (9). Tighten the line to a torque of 13 N m (10 lb ft).
If a visual inspection of the fuel line connections and the coolant line connections is not performed during the ARD ignition test, fuel leaks or coolant leaks may result in a fire hazard which could result in personal injury or death. Visual inspection of the fuel line connections and the coolant line connections is the only method to detect a fuel leak or a coolant leak on the ARD system. Visually inspect the fuel line connections and the coolant line connections at the ARD head and the ARD manifold when the ARD ignition test is
Do not perform any procedure in this special instruction until you have read this information and you understand this information.Required Parts
This special instruction requires the use of the 361-3923 Combustion Head Kit . The kit contains two 296-7780 Gaskets and a 353-9958 Combustion Head As Procedure
Illustration 1 g02174529
ARD combustion head (1) Spark plug (2) Wire for the heated nozzle (3) Flame detection temperature sensor
Remove spark plug (1) from the old ARD combustion head.
Remove flame detection temperature sensor (3) .
Remove wire for the heated nozzle (2) from the old head.
Remove the ARD combustion head. Refer to the Disassembly and Assembly Manual, "Combustion Head Group (ARD) – Remove and Install (Clean Emissions Module)".
Illustration 2 g02173966
(4) Gaskets (5) Studs
Remove gaskets (4).
Install new gaskets (4) .
Apply 4C-5597 Anti-Seize Compound to the threads of studs (5).
Install the ARD combustion head. Refer to the Disassembly and Assembly Manual, "Combustion Head Group (ARD) – Remove and Install (Clean Emissions Module)".
Apply 4C-5597 Anti-Seize Compound to nuts (6). Tighten the nuts in a crisscross pattern to a torque of 23 3 N m (17 2 lb ft). Tighten nuts (6) again in a crisscross pattern to a torque of 28 3 N m (21 2 lb ft). Tighten nuts (6) again in a crisscross pattern to a torque of 28 3 N m (21 2 lb ft).
Illustration 3 g02174916
(7) Gasket for the ARD combustion air
Install a new gasket for the ARD combustion air (7) .
Install the spark plug (1) from the old combustion head into the new combustion head. Torque the spark plug to 47 4 N m (35 3 lb ft).
Install flame detection temperature sensor (3) into the new combustion head. Torque the temperature sensor to 45 5 N m (33 4 lb ft).
Install wire for the heated nozzle (2) into the new combustion head with the hardware from the old combustion head.
Illustration 4 g02175353
Typical example (8) Pilot fuel fitting (9) Main fuel fitting (10) Fittings for the coolant
Install the ARD coolant lines on fittings for the coolant (10). Tighten the lines to a torque of 16 2 N m (12 1.5 lb ft).
Install the ARD pilot fuel line onto pilot fuel fitting (8). Tighten the line to a torque of 20 N m (15 lb ft).
Install the ARD main fuel line onto main fuel fitting (9). Tighten the line to a torque of 13 N m (10 lb ft).
If a visual inspection of the fuel line connections and the coolant line connections is not performed during the ARD ignition test, fuel leaks or coolant leaks may result in a fire hazard which could result in personal injury or death. Visual inspection of the fuel line connections and the coolant line connections is the only method to detect a fuel leak or a coolant leak on the ARD system. Visually inspect the fuel line connections and the coolant line connections at the ARD head and the ARD manifold when the ARD ignition test is
Caterpillar parts catalog:
Parts yoke Caterpillar catalog:
4229551
YOKE AS
Caterpillar
Caterpillar
5567119
YOKE AS
Caterpillar
Caterpillar
4850030
YOKE
Caterpillar
Caterpillar
4818208
YOKE-UNIVERSAL JOINT
Caterpillar
Caterpillar
4817680
YOKE
Caterpillar
Caterpillar
4781841
YOKE
Caterpillar
Caterpillar
5169658
YOKE GP
Caterpillar
Caterpillar
5155345
YOKE AS
Caterpillar
Caterpillar
4899394
YOKE AS
Caterpillar
Caterpillar
4468185
YOKE AS
Caterpillar
Caterpillar
4468175
YOKE
Caterpillar
Caterpillar
4459403
YOKE
Caterpillar
Caterpillar