YOKE AS. 5065697 - Caterpillar

Removal Procedure
Start By:
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Raise the cab. Refer to Disassembly and Assembly, "Cab - Tilt".
Illustration 1 g01055162
Disconnect harness assembly (1). Remove nut (2) and remove coil assembly (3) .
Illustration 2 g01055180
Remove valve (4) .Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 3 g01055180
Install valve (4) .
Illustration 4 g01055162
Install coil assembly (3). Install nut (2). Connect harness assembly (1) .