YOKE 5V2976 - Caterpillar

Removal Procedure
Start By:
Remove engine enclosure.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.
Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for draining and filling procedures.
Refer to Operations and Maintenance Manual, "Cooling System Coolant - Change" for draining and filling procedure.
Illustration 1 g02731497
Disconnect harness assembly (1). Remove hoses (2) .
Illustration 2 g02731503
Remove hoses (3) and (6). Remove cable strap (5). Remove shunt tank (4) .
Illustration 3 g02731513
Remove clamp (9). Remove hose (10) .
Illustration 4 g02731540
Illustration 5 g02731545
Remove hoses (11) and (12) .
Illustration 6 g02731549
Attach a suitable lifting device. The weight of cooling package assembly (15) is approximately 227 kg (500 lb). Remove bolts (13) and (14). Repeat this step for the other side.
Remove cooling package (15)