YOKE 6Y2658 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 3E-3880 Eyebolt 1
B 9U-7479 Compressing Tube 1
C 1U-9889 Crossblock 1
1B-3573 Bolt 2
8T-4994 Hard Washer 2
8T-4122 Hard Washer 2
8T-4223 Hard Washer 2
6V-8188 Nut 2
D 1H-3107 Push-Puller Tool Gp 1
5F-7343 Bearing Puller Gp 1
E 1P-0520 Driver Gp 1
F - Threaded Rod
1/2 - 13 by 11 in 2
6V-8188 Nut 4
5F-7344 Puller Block 2
G 1U-5750 Engine Stand 1
1P-2850 Oil Drain Cart 1
H 138-7575 Link Bracket 3
J 1P-0510 Driver Gp 1
K FT-1028 Sleeve Assembly 1
1P-0520 Driver Gp 1
L 138-7573 Link Bracket 2
M 376-1570 Plug As. - Extension 1
N 9S-3263 Thread Lock Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02453074
Install Tooling (F).
Use Tooling (G) in order to reposition the transmission housing. The weight of the transmission housing is approximately 41 kg (90 lb).
Illustration 2 g02452549
Install ring seal (119) and ring seal (118).
Illustration 3 g